Question about 2001 Dodge Ram 2500 Truck

1 Answer

WHAT IS THE NORMAL OPPERATING PRESSURE FOR THE FULE DELIVERY PUMP ON A 2000 DODGE CUMMINS DIESEL?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Charge pump pressure should be somewhere between 9-22 PSI
pref about a constant 16psi

Posted on Oct 05, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the fuel pump pressure for a 91 dodge Cummins diesel?


what cummins diesel engine model is in the dodge
cummins make a large range of engines all of which have various pump pressures depending on the injector set up
ask your question again and concentrate on the engine details

Jan 20, 2016 | Dodge Cars & Trucks

1 Answer

Where is the fuel pump located on 2000 peterbuilt 379


most diesels have the fuel pump integral with the pressure pump
you are talking about the transfer pump and not the high pressure injector pump a mention of what engine you have is better than the truck make as peterbuilt normally run 3 makes of engines ---cat, detroit or cummins

Aug 29, 2015 | Cars & Trucks

2 Answers

I have a 98 dodge cummins: the truck will be a full power and the lose power for a few seconds (almost like shutting the key off) and the will pick back to normal power and repeat this sequence about


this may help:

I have a 97 Cummins. Lots of warnings about lift pump failure or cracks in fuel hose leading to problems with injector pump - $$. There are several really good cummins forums that can be very helpful as well - just google "ram diesel forum" lots of sharp cummins guys.
this is one of my favorites

Turbo Diesel Register

Jan 03, 2015 | Dodge Cars & Trucks

1 Answer

Transit pump code p0216 how can i fix this


P0216 DTC - Injection Timing Control Circuit Malfunction and this means the diesel fuel injection pump has a timing failure. This could be that the injection pump timing needs adjusted OR the failure is internal to the injection pump and therefore non-adjustable.

NOTE: If your vehicle is a Dodge Ram with Cummins engine then be aware that fuel delivery problems frequently cause this code. Prolonged fuel delivery problems can cause injection pump failure!

Symptoms of a P0216 DTC may include:
Low power
Crank, but no start
Hard start
Displays an intermittent stumble or miss
Engine may start and then stall
Engine may appear to drive fine but surge at idle


The most frequent cause of this code is a bad injection pump due to poor fuel delivery. Fuel delivery problems could be:
A plugged diesel fuel filter
An in-tank blockage
Air in the fuel due to a cracked in-tank fuel ine above the fuel level
Bad transfer (lift) pump
Injection pump out of time


Possible Solutions: First, simply check if your injection pump timing is adjustable. If so, check the timing and adjust if necessary.

If you think that you may have a fuel delivery problem, then check the lift pump operation. On Dodge Ram with the Cummins engine, the lift pump should produce about 45 oz of diesel in 25 seconds of operation. This can be performed by disconnecting the fuel hose from the injection pump and pumping the fuel into an approved container. Bump the engine over but do not start it. Then the lift pump will operate for 25 seconds. If the fuel is aerated, then check/repair fuel line and recheck.

With the fuel hose connected the fuel pressure should be 10psi. If the fuel delivery tests fail, replace the diesel fuel filter and recheck.

If it still fails then verify there are no restrictions in the fuel tank

Then replace the lift (transfer) pump. IT SHOULD BE NOTED that if this code surfaced after a routine fuel filter replacement or if you have any of the above symptoms after routine fuel filter replacement, then suspect the fuel transfer pump. This occurs because even a weak transfer pump can still provide enough fuel for the engine to run. But when the fuel system\'s prime is lost due to fuel filter replacement, it may not restart again without fixing the fuel delivery problem.

If you found your injection pump to be bad, the lift pump should be checked for operation to protect the new injection pump. This is because weak or low output from lift pump are common cause of injection pump failure. There are some aftermarket kits that can be purchased to warn the operator when the fuel pressure/volume drops to level that could damage the injection pump.

Hope this helps (remember to rating this free answer and leave a testimonial comments).

Oct 11, 2011 | Cars & Trucks

1 Answer

01 dodge ram diesel with faults p0252 p0253 p1693


All three of those refer to the ecm. 98 to 02 cummins have a vp44 inj pump with the ecm built inside. These are known to have problems,specifically due to poor lift pump pressure. The pump usually does not give any warnings they just quite. HOPE THIS HELPS

Dec 28, 2009 | 2001 Dodge Ram 2500 Truck

1 Answer

2001 Dodge truck with Cummins diesel cruise control problem


Take it into Cummings agent and get them to put it on the check out box (in a KW its in the dash ) but they will be able to fix your problem in about 10 minutes.

Have a goodday

Oct 15, 2009 | 2001 Dodge Ram 2500 Truck

1 Answer

Water pump replacement procedure 2005 2500 dodge with cummins diesel


take off old water pump. clean up area on the motor real good.do this by using a scrapper and cleaning slolvent. when thats all done put hi temp silicon on the block water pump and the put gasket on silicon. let dry for like five minutes. put in on torque bolts to specs.

Aug 22, 2008 | 2005 Dodge Ram 2500 Truck

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

123 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...