SOURCE: 96 Dodge Caravan hv,ac motor only runs on high.
If you underneath the dashboard, behind the glove box, the a/c blower motor should be there inside a black case..turn the a/c on and off, and you should find out its exact location.. Now once you do that, the blower resistor should have a plug and two small screws on each side of it.. It should be close to the blower motor, if not on the side, maybe a little up and to the left of it...Goodluck...
Testimonial: "Thank you for the quick reply. I looked all over that area before as it would make sense for the resistor pak to be mounted there. I'll try again."
SOURCE: Can't remove rear wiper to replace on 96 caravan
Lift wiper arm from rear window. then release latch that holds the blade to the wiper arm.( It's small tab)
SOURCE: 96 dodge caravan code p1494
P1494 Leak detection pump pressure or mechanical fault, hope this helps
SOURCE: 96 dodge caravan 3.0 has p300 and p306 codes,
A P0306 code means that the the ECM has detected that one of the engine's cylinders is not firing properly. In this case it's cylinder #6.
A code P0306 may mean that one or more of the following has happened:
Faulty spark plug or wire, Faulty coil (pack), Faulty fuel injector, Burned exhaust Valve, Poor compression, and Defective computer.
Check all wiring and connectors that lead to the cylinders (i.e. spark plugs). Depending on how long the ignition components have been in the Caravan, it may be a good idea to replace them as part of your regular maintenance schedule. I would suggest spark plugs, spark plug wires, distributor cap, and rotor (if applicable). Otherwise, check the coils (a.k.a. coil packs). The number six cylinder is the one towards the radiator and drivers side. If you are going to change all the plugs and wire keep me posted, be glad to help. Good luck and hope this helps, P0300 just means multi miss fire.
1,128 views
Usually answered in minutes!
×