Question about 1991 Toyota Camry

1 Answer

Car will not turn over installed new battery and checked fuses

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 33 Answers

Check ign switch

Posted on Aug 26, 2010

  • 1 more comment 
  • michaeltrisk Aug 26, 2010

    ok I will try that thank you

  • dturner68 Aug 29, 2010

    there are some fuseible links too you might check, also check to see if you have 12 volts at the starter wire from ign.

  • michaeltrisk Sep 24, 2010

    it turned out to be a bad conection from the ignition to the starter. just jiggled some wires and it started right up.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Tried 3 new batterys,had alternator checked,had a new serpentine belt installed as per recall notice from Mitsubishi for 08 lancer,had certified techs from Mitsubishi dealer installed new belt car started...


If you know for sure the battery, alternator, and serpentine are OK. then (A) you might need more power to start than your battery can produce. This is not likely because the jump battery does the job. (B) are not really charging because of a bad connection at ground, battery cable, or fuse. You can test this with a volt meter. You might try checking the battery condition just after running by turning on the headlights and see what they do when you try to start. You can check it again a few hours later. (C) Something in the car is draining power. You can check this by (1) disconnecting the ground cable at the battery, (2) charging the battery, (3) connect a test lamp between the the battery cable and the battery. If the test lamp glows, some device is pulling power with the ignition off. Pull fuses one at a time until the test light goes out. (replace the fuses if the light stays on.) Then find the component on the fuse that is grounded and fix it. Look for simple stuff like a wire with bad insultion at one spot or maybe a bad cigar lighter.

Mar 30, 2015 | Mitsubishi Cars & Trucks

1 Answer

Son Installed new battery and now no current to anything


Measure the voltage in the new battery. It should read close to 12Volts. Some batteries need to be charged before they are sold. Perhaps yours didn't. Have you tried to charge it yourself?

Dec 03, 2013 | 2005 Acura MDX

1 Answer

Ihave a 08 honda odssey, a new battery was install and their is no power to the radio, i have the code but it don't turn on so you can put the code in


Have you checked the fuse for the radio, there may be more than one, there should be one in the fuse panel on the inside of the vehicle and there may or may not be another fuse and relay housing in the engine compartment.

Apr 02, 2012 | Cars & Trucks

1 Answer

Main fuse keeps blowing. changed battery and installed radio. brand new fully connected postitive termial, vusually checked all wires coming off battery. some sort of radio relay clciks when radio plugged...


Hello! Identify which fuse is blowing...also, does it blow as soon as it is installed or does it blow when you turn the key? Lastly your not referring to a fusible link but a maxi-fuse...ie...40; Correct?

Oct 16, 2011 | 1994 Chevrolet Suburban

1 Answer

Put a new battery won't turn over can't get no power


Check main engine fuses in fuse box, also check to make sure you have the right battery and that the terminals are not corroded badly and that they are tight. Some of those escorts need a reverse terminal battery. The positive and negative are on opposite sides than normal. If the wrong battery was installed, there could be some major damage. If all that is good, check the ignition module.

Mar 03, 2011 | 2002 Ford Escort

2 Answers

After trying to jump start from another car and then purchasing a new battery and installing the van will not even turn over. Electric doesn't even switch on. Ideas?


Check for a main fuse,under the hood in the fuse /relay box.clean the cable ends,and the battery post,look for a fusible link,that maybe burned into,it will be at the end of the positive cable.

Jun 19, 2010 | 2000 Honda Odyssey

1 Answer

Blown fuse ? 2- new batteries truck dead.


check fuse box for ign 1 fuse blown Probably a large green maxi fuse.

Jun 17, 2009 | 2001 GMC W3500

Not finding what you are looking for?
1991 Toyota Camry Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...