Question about 2005 Chevrolet Impala

2 Answers

Instrument cluster - 2005 Chevrolet Impala

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Director Badge:

    Uploaded 100 video answers.

    Producer:

    Uploaded 30 video answers.

  • Expert
  • 154 Answers

Pretty common problem with these. Here's a guide to learn how to fix GM instrument clusters yourself, I used it to fix mine and it worked great.How to guide for Silverado instrument cluster repair
Pretty common problem with these. Here's a guide to learn how to fix GM instrument clusters yourself, I used it to fix mine and it worked great.How to guide for Impala instrument cluster repair

Posted on Oct 07, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Chevrolet Master
  • 294 Answers

Is the speedometer and/or tachometer needle acting weird, giving wrong readings or dead? If so it's most likely the drive motor behind the gauges going out. Very common on Impala instrument clusters and speedometers for this to happen, all the drive motors need replaced.

I replace these for people with Impalas and other GMs and give a 12 year guarantee, you can email me at fred@drspeedometer.com or visit my site at DrSpeedometer.com

Posted on Aug 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On a2000buick century odometer not working


You would need to take it to the dealer or someother qualified repair shop that has the diagnostic tool to check for DTC'S - diagnostic trouble codes in the instrument cluster .
DTC B0570 Season Odometer Malfunction

The instrument cluster receives a vehicle speed input from the vehicle speed sensor (VSS) over the Class 2 line. This signal is used in order to drive the speedometer and the odometer of the instrument cluster. The instrument cluster will compare the VSS data with a 16-point look-up table in order to determine needle deflection. A smooth filter is used in order to secure a continuous response. The season odometer displays the total accumulated kilometers (miles) of the vehicle. This value is permanently stored in the Electronically Erasable Programmable Read Only Memory (EEPROM) of the instrument cluster. The trip odometer displays the accumulated kilometers (miles) to the tenths of a kilometer (mile) since the last reset. This value is stored in Keep Alive Memory (KAM) of the instrument cluster.

Test Description
The numbers below refer to the step numbers on the diagnostic table.
Always perform the Instrument Cluster Diagnostic System Check before attempting to diagnose this DTC.
This diagnostic procedure requires using a scan tool.
This repair procedure requires instrument cluster replacement.
Step
Action
Value(s)
Yes
No
1
Did you perform the Instrument Cluster Diagnostic System Check?
--
YES - Go to Step 2
NO - Go to Diagnostic System Check - Instrument Cluster
2
Using a scan tool, clear the instrument cluster DTC and retest for DTC B0570.
Does DTC B0570 reset?
--
Go to Step 3
Go to Powertrain On Board Diagnostic (OBD) System Check in Engine Controls - 3.1L or Powertrain On Board Diagnostic (OBD) System Check in Engine Controls - 3.8L
3
Replace the instrument cluster. Refer to Instrument Cluster Replacement .
Is the repair complete?
--
System OK
Go to Diagnostic System Check - Instrument Cluster
© 2017 General Motors Corporation. All rights reserved.

Feb 27, 2017 | 2000 Buick Century

1 Answer

I just bought a 1998 Pontiac Bonneville and now the system monitor light is on why and what does that mean?


No other messages in the driver info center ?
This section provides an overview of the instrument cluster operation as well as a detailed diagnosis. The instrument cluster serves as the primary interface for the vehicle's driver.
The instrument cluster contains a microprocessor as part of the instrument panel assembly. The instrument cluster performs the following functions:
• Recognizes operational malfunctions
• Alerts the driver through indicators
• Stores DTCs which identify malfunction areas
In order to perform all of these functions, the instrument cluster microprocessor has its own inputs, outputs and program software. The instrument cluster has the capability to diagnose malfunctions in the following components:
• The sensors
• The input switches
• The components
• The systems the instrument cluster communicates with or controls
When the instrument cluster or another microprocessor-controlled module detects a malfunction, the instrument cluster may turn on an instrument cluster indicator in order to alert the driver that a malfunction has occurred. Some indicator lamps have dual controls. Your best bet is have it checked for DTC'S diagnostic trouble codes !

Mar 02, 2016 | Pontiac Cars & Trucks

1 Answer

Fuse box place for dashlights on ford escape 2008


Principles of Operation
The instrument cluster sends a signal to the instrument panel dimmer switch. The instrument cluster provides a variable pulse width modulated (PWM) signal to the dimmable backlighting components in accordance with the position of the instrument panel dimmer switch.
  • The instrument cluster illumination is inoperative
  • Instrument cluster
  • INSTALL a new instrument cluster. REFER to Section 413-01 . TEST the system for normal operation.
SJB -location below center of instrument panel
Inspection and Verification
  1. Verify the customer concern.
  1. Visually inspect the following for obvious signs of mechanical or electrical damage.

    Visual Inspection Chart Mechanical Electrical
    • Instrument panel dimmer switch





    • Smart junction box (SJB) fuse(s):
      • 7 (10A)
      • 15 (30A)
    • Circuitry
    • Illumination bulbs
    • Instrument cluster
    • SJB

Nov 18, 2015 | Ford Cars & Trucks

1 Answer

How to remove a dash cluster 94 toyota camry


Remove the 2 screws from the center cluster lower finish panel and remove the center cluster lower finish panel.

Remove the 4 screws from the lower edge of the instrument cluster finish panel.
Using a screwdriver, carefully pry rearward on the instrument cluster finish panel to release the clips and remove the instrument cluster finish panel.

Remove the 4 screws from the instrument panel cluster carrier. Disconnect the electrical connector and remove instrument cluster.

Reverse procedure to install.

Oct 09, 2011 | 1994 Toyota Camry

1 Answer

Insturmentation panel lights fuse blows when i start car


Try to remove the instrument panel and disconnect the harness to see if doing that gets rid of the blown fuse when starting the car. If it does, then the instrument panel should be replaced with another. If the fuse still blows when starting, then there is a wire shorted to ground somewhere.
---
Instruments and Switches Instrument Cluster Removal & Installation To Remove:
  1. Remove the instrument cluster trim plate.
  2. Remove the instrument cluster mounting screws.
  3. Rotate the instrument cluster rearward and lift up on the top of the cluster in order to disengage the locating pins.
  4. Disconnect the electrical connectors from the instrument cluster.
  5. Remove the instrument cluster.
To Install:
  1. Connect the electrical connectors to the instrument cluster.
  2. Position the locating pins to the holes in the instrument panel.
  3. Install the instrument cluster by rotating the top inward.
  4. Install the mounting screws.
  5. Install the trim plate.
prev.gif next.gif

Nov 09, 2010 | 2001 Pontiac Grand Am SE

2 Answers

Instrument cluster keeps going off and on. i have


Pretty common problem with these. Here's a guide to learn how to fix GM instrument clusters yourself, I used it to fix mine and it worked great.How to guide for Silverado instrument cluster repair
Pretty common problem with these. Here's a guide to learn how to fix GM instrument clusters yourself, I used it to fix mine and it worked great.How to guide for Yukon instrument cluster repair

Jul 25, 2010 | 2002 GMC Yukon XL

2 Answers

2004 trailblazer with a problem with the instrument cluster being intermittant. Sometimes its off for days, sometime only a few hours.


Is it the entire instrument cluster or only some of the gauges? Check this page for more about Trailblazer instrument cluster problems - Trailblazer instrument cluster fix

Oct 27, 2009 | 2004 Chevrolet TrailBlazer

1 Answer

Need to replace instrument cluster/AC bulbs


Hello, You can obtain a 2004 Ram Factory Service Manual with all of that information available from Promanuals.net. The reason why it may be so important is because right before the removal instructions the service manual has diagnostic instructions to try. There are numerous pages on removing the instrument cluster, and cluster bezel.

(1) Disconnect and isolate the battery negative
cable. (For Airbag)

(2) Remove the cluster bezel from the instrument
panel. (Refer to 23 - BODY/INSTRUMENT PANEL/
CLUSTER BEZEL - REMOVAL).

(3) Remove the four screws that secure the instrument
cluster to the instrument panel structural support
(Fig. 5).

(4) Pull the instrument cluster rearward far
enough to access and disconnect the instrument
panel wire harness connectors for the cluster from
the connector receptacles on the back of the cluster
housing.

(5) Remove the instrument cluster from the instrument
panel.
9e8a042.jpg

Oct 01, 2009 | 2004 Dodge Ram 1500

1 Answer

How is the instrument panel removed from the dash of a 97 mercury cougar problem


1997 Thunderbird/Cougar Instrument Cluster Removal
  1. Disconnect battery ground cable (14301).
  1. Remove retaining screws and instrument panel reinforcement (017A28).
  1. Remove retaining screws and instrument panel lower shield (045G02).
  1. Make sure air bag system is properly disarmed. Remove fasteners holding steering column. Gently lower steering column.
  1. Remove screws holding the instrument panel finish panel (044D70) and gently pry off.


    Instrument Panel Finish Panel

  1. Remove four instrument cluster retaining screws. (Do not remove screws from the instrument cluster main lens (10887) and instrument cluster mask (10890)).
  1. Slide the instrument cluster (10849) to the right of the instrument panel opening and disconnect the instrument panel harness from the back of the instrument cluster.
  1. Remove the instrument cluster from the instrument panel (04320).

1997 Thunderbird/Cougar Installation
  1. Follow removal procedure in reverse order.
  1. Tighten instrument cluster retaining screws to 2-3 Nm (18-27 lb-in).

Jun 01, 2009 | 1997 Mercury Cougar XR7

Not finding what you are looking for?
2005 Chevrolet Impala Logo

720 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...