Question about 1995 Ford F250

1 Answer

The fuel pump on my front gas tank does not come on. Can I remove the pump without removing the tank from the truck?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 103 Answers

Yes but you have to drop the tank down for access to remove the pump

Posted on Aug 25, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a access panel in the 1998 grand Cherokee jeep without dropping the gas tank


I replaced the fuel pump in a 1995 Jeep Cherokee Sport without having to remove the gas tank. Maybe you can too in your '98 Grand Cher. If your fuel pump is accessed from the upper front of the gas tank-above the rear differential-then you should be able to remove the pump with the tank in place. It was easy on that jeep of my son's, took only about an hour or two.

Jun 18, 2016 | Jeep Cars & Trucks

2 Answers

How do I remove gas from the gas tank without removing the tank?


pull the fuel line off after the fuel pump and let it pump out into a bucket
remember not flames or ignition sources when doing this

Oct 01, 2015 | 2005 Hyundai Tucson

1 Answer

I changed the fuel pump to my car but still it can't start and the engine is 1zz


Assuming fuel pump was in gas tank unless older vehicle, in front of gas tank under the car will be a fuel filter...canister shaped..like a miniature coke can...has one line coming from gas tank, one coming from front of filter to engine, will either have lines that thread into filter or plastic clips you remove and take lines off..take filter off and dump into a clear bottle, if gas is dirty or has trash you prob need to replace fuel fiter..also you should be able to blow through the filter without virtually any resistance..if its not similar to blowing through a straw..filter is clogged..also you can just take fuel line off in front of filter...have someone turn the key to on position...when you turn key to on not crank just on..fuel pump powers on for a couple seconds and if filter isn't clogged you should have fuel come out the front side of fuel filter

Sep 18, 2015 | Cars & Trucks

2 Answers

Engine will start and run for 2-3 sec and die


Fuel Pump went out or a problem with the ECU but 98% of teh time, it is the Fuel Delivery System. The Fuel Injectors require 40 PSI to operate correctly and if the pressure is below that, your car will not get enough fuel to run and will DIE after starting...

Apr 06, 2013 | 1994 Jeep Grand Cherokee

1 Answer

Replace fuel pump


Best to do this in a well vented area because of the fire hazard, so that the gas fumes don't accumulate.
1) Disconnect battery negative cable.2) Jack up car and support on safety Jack stands3) Siphon gas out of tank4) Remove three rubber hoses on rear of tank. These are used for gas fill up; remove hose clamps and disconnect.5) Remove three hoses from front of tank; these hoses go from the fuel pump to the engine. You'll need special fuel line wrenches for this.6) Disconnect two connectors at the front of the tank.7) Remove two bolts that hold the exhaust pipe heat shield. You'll want to use penetrating oil on these; they will be corroded.8) Support tank with a floor jack. Remove the bolts which hold the tank in place. Pivot the tank on the exhaust, tilt and slide out.9) The gas hoses are taped to the tank. Remove the hoses. The fuel pump plate has about 12 screws around it. Remove the screws. Lift the plate out. The fuel pump is retained with one screw. Remove the screw. Filter is retained with a clip; remove it.10) Get your new fuel pump ($250), the rubber gasket for the fuel pump plate, and new filter ($5). Compare the pump with the old one; it must be the exact lenght. I had to go to two different auto parts stores before I got the right one.Installation is opposite of above. Good luck!Fuel pump is not too tough. First, get a Haynes or Chilton manual for reference (about $14).Best to do this outdoors, so that the gas fumes don't accumate. If I recall correctly:1) Disconnect battery2) Jack up car3) Siphon gas out of tank4) Remove three rubber hoses on rear of tank. These are used for gas fill up; remove hose clamps and disconnect.5) Remove three hoses from front of tank; these hoses go from the fuel pump to the engine. You'll need special fuel line wrenches for this.6) Disconnect two connectors at the front of the tank.7) Remove two bolts that hold the exhaust pipe heat shield. You'll want to use penetrating oil on these; they will be corroded.8) Support tank with a floor jack. Remove the bolts which hold the tank in place. Pivot the tank on the exhaust, tilt and slide out.9) The gas hoses are taped to the tank. Remove the hoses. The fuel pump plate has about 12 screws around it. Remove the screws. Lift the plate out. The fuel pump is retained with one screw. Remove the screw. Filter is retained with a clip; remove it.10) Get your new fuel pump ($250), the rubber gasket for the fuel pump plate, and new filter ($5). Compare the pump with the old one; it must be the exact lenght. I had to go to two different auto parts stores before I got the right one.Installation is opposite of above. Good luck!


Read more: http://wiki.answers.com/Q/How_do_you_change_a_fuel_filter_for_a_92_geo_storm#ixzz27tyFTkDd

Sep 29, 2012 | 1990 Geo Storm

1 Answer

I have a 1985 Ford F-250 4x4 460 ci with dual tanks. It is not getting fuel. I can put gas directly into the carb and it starts right up but will not continue running. Previously it would only run on the...


YOUR FRONT TANK IS THE MAIN FUEL SUPPLY CHECK THE FUEL PUMP RELAY BY SWAPPING IT WITH ANOTHER AND SEE IF THAT WORKS, ALSO CHECK SEE IF FILTER IS CLOGGED EEN A SMALL MYNUTE PARTICAL WILL BLOCK THE OPENING IF IT DONT THEN IF YOU CAN GET TO THE WIRE HARNES CHECK VOLTAGE GOING INTO THE PUMP. OTHER THAN THAT YOU HAVE NO CHOICE BUT TO TEAR INTO THE FUEL TANKS TO GET TO THE PUMP

Aug 03, 2011 | Ford F-250 Cars & Trucks

2 Answers

Can you replace the fuel pump without pulling the fuel tank


Unfortunately not. I have had some people install a aftermarket high pressure pump inline that has worked however i do not recommend this.
The job is actually not to back, remove most of the gas from the tank, remove the straps ( might need to replace them) and remove the tank partially to expose the fuel line connections. Remove the fuel lines and power connector then remove the tank. Remove the locking ring on top the tank, remove the pump and fuel level sender. Install new pump and re install.

Jul 31, 2010 | 1993 GMC Safari

1 Answer

How to remove the fuel pump from a ford explorer 1996 can not get fuel pump off of gas tank


Removing the fuel pump requires lowering the fuel tank from the vehicle, the fuel lines require special tools to remove the lines from the pump without damaging the lines( tool availiable at parts store) then remove the lock ring by turning counter clockwise , then the pump , is held to the bottom of the tank by a clip on each side of the pump once depressed the pump will come out.

May 29, 2010 | 1996 Ford Explorer

1 Answer

Changing the fuel pump any advice? Can I change it without removing the tank where the pump is on the front of the tank?


generaly if the fuel pump is in the tank it canot be removed without removing the tank.

Nov 19, 2009 | 1993 Lincoln Town Car

1 Answer

Replacing Fuel Pump without removing Gas Tank?


no the tank must be removed from the truck, to remove the pump.


get a high quality pump or yu will doing/ or paying for this repair again.

pump failure is common in tahoes

Apr 11, 2009 | 2003 Chevrolet Tahoe

Not finding what you are looking for?
1995 Ford F250 Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...