Question about Toyota Corolla

1 Answer

My 2005 Corolla is continuing to have trouble with shifting. I keep getting the code p2716, but I have already had the compression solenoid for that code replaced. What should I do?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

There is currently a recall going on for this problem. You can likely get your money back on the prior repairs as well. See this link http://www.toyota.com/recall/corolla-matrix.html. On the left-hand side, you can click to take you to put in your VIN and see if your vehicle is included. My 2007 vehicle IS included, and I just had the check engine light come on and have been experiencing rough shifting for about 6 months. When the light came on yesterday, it was extremely rough jerky shifting. The light went off today. Took it to Autozone and got same code P2716. Toyota has assigned me a case number, but I won't get a call back until Monday or by close of biz on Tuesday. This problem can cause your car to not start, or to shut down while driving. YIKES! The person I talked to at Toyota acted a little too nonchalant about the whole deal. Telling me to just wait for the call that I will get. She said most dealers would not have the part needed to fix this. According to what I have read. That is the reason why Toyota is not sending out the notification letters to the affected parties until mid-September. Check out all the info and good luck. I am a little bit p.o'd about this right now. - Natalie

Posted on Sep 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Code p2716 on 2005 corolla and location


P2716 Pressure Control Solenoid 'D' Circuit Malfunction
Possible Causes Setting Conditions
  • Shift solenoid (SLT) connector is damaged (check pins for damage, moisture)
  • Shift solenoid (SLT) control circuit is open or shorted to ground
  • Shift solenoid (SLT) has failed (electrical fault)
  • ECM has failed the solenoid is under/ behind the transmission pan

Dec 16, 2016 | Cars & Trucks

1 Answer

Toyota hilux 2011 model trouble code p2716


here is some info. I hope it helps.

This is a code relative to shift solenoid malfunctions in your computer. This is a known problem on your model and Toyota released an updated PCM to correct the problem.
While you can replace the PCM yourself if you are out of warranty, your dealer will need to code your VIN to it in order to get rid of the check engine light.
The warranty coverage is 8 years or 80,000 miles from new.

The details of the bulletin are below:

TRANSMISSION & CLUTCH
TC015-07 Title:
HARSH SHIFT AND M.I.L. "ON"
DTC P2716 Models:
'05 - '07 Corolla & Matrix (1ZZ-FE) September 20, 2007
TSB UPDATE NOTICE:The information contained in this TSB supercedes TSB No. TC014-06.
TSB No. TCO14-06 is now obsolete and should be discarded. Introduction
Some 2005 - 2007 model year Corolla and Matrix vehicles equipped with an automatic transaxle may exhibit a harsh shift condition and a M.l.L. ON" with DTC P2716 stored. Improvements have been made to the Engine Control Module (ECM) (SAE term:
Powertrain Control Module/PCM) to reduce the possibility of this condition occurring

Aug 30, 2015 | Toyota Cars & Trucks

1 Answer

P2716 code in 2007 Toyota Corolla


P2716 -Pressure Control Solenoid "D" Electrical (Shift
Solenoid Valve SLT)
Trouble Area:
1. Open or short in shift solenoid valve SLT circuit. (repair harness wiring)
2. Shift solenoid valve SLT defective. (replace)
3. ECM defective. (replace with a good known one)

Nov 25, 2013 | 2007 Toyota Corolla S

1 Answer

Need wiring diagram for 2006 pressure control solenoid


manual that you can get at autozone for around $20.00 should have it and all specs.......good luck..

Aug 18, 2012 | 2005 Toyota Corolla

1 Answer

Right now my car has a problem with the p2716 code


Unfortunately a P2716 code is a code for the pressure control solenoid inside the automatic transaxle, my suggestion to you is to take it to your local Toyota dealer where they will be able to monitor the shift solenoids within the transaxle.

Hope this helps....

DTC P2716 PRESSURE CONTROL SOLENOID "D" ELECTRICAL

Sep 09, 2011 | 2006 Toyota Corolla

1 Answer

I have a 2006 Toyota Corolla, only 17k miles, bought from Carmax in mid-2007. My check engine light came on, had it checked, and it read P2716 - Pressure control solenoid D electrical fault. Probable...


DTC P2716 - Pressure Control Solenoid "D" Electrical (Shift Solenoid Valve SLT)

If you need to test this electrical components and wiring. Tell me if you need the TSB about this DTC.

Dec 29, 2010 | 2005 Toyota Corolla

2 Answers

What does code P2716 and how do I fix? Shift selonoid switch.


This has nothing to do with the shift solenoid switch. It is a failure of the ECM computer module. If your car is less than eight years old and less then 80K miles, it is covered by warranty

If not, the part is about $550.

Aug 23, 2010 | 2007 Toyota Corolla

2 Answers

P2716 pressure control solenoid d 2005 toyota corolla 117000 miles check engine light on


This is very common on Matrix/Corollas and is repairable by way of replacement PCM to correct invalid parameters. the labor is low but the part is very expensive.

Expect approximately $89 or less in labor, and $648 for the new PCM



Reference bulletin #TC015-07

The contents are below:

TRANSMISSION & CLUTCH
TC015-07 Title:
HARSH SHIFT AND M.I.L. "ON"
DTC P2716 Models:
'05 - '07 Corolla & Matrix (1ZZ-FE) September 20, 2007

Introduction
Some 2005 - 2007 model year Corolla and Matrix vehicles equipped with an automatic transaxle may exhibit a harsh shift condition and a M.l.L. ON" with DTC P2716 stored.
Improvements have been made to the Engine Control Module (ECM) (SAE term:
Powertrain Control Module/PCM) to reduce the possibility of this condition occurring.

Applicable Vehicles
^ 2005 - 2007 model year Corolla and Matrix (2WD) vehicles equipped with the 1ZZ-FE engine.
Warranty Information
Applicable Warranty*:
This repair is covered under the Toyota Federal Emissions Warranty. This warranty is in effect for 96 months or 80,000 miles, whichever occurs first, from the vehicle's in-service date.

Oct 28, 2009 | 2006 Toyota Matrix

1 Answer

2005 Pontiac Vibe having trouble shifting 1st 2nd code P2716 MIL


This is most likely due to a bad solenoid pack in transmission. You could have tranny serviced and see if it helps. Poor fluid condition makes valves stick in those.

Aug 14, 2009 | 2005 Pontiac Vibe

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

246 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...