Question about GMC Sonoma

2 Answers

How do I jump it out - Sonoma GMC Cars & Trucks

Posted by on

  • 2 more comments 
  • Marion Price Aug 25, 2010

    I am talking about jumping the ac relay to make the a/c clutch kick in

  • Marion Price Aug 25, 2010

    I am talking about jumping the ac relay to make the ac clutch kick in

  • Marion Price Aug 25, 2010

    How do I jump the a/c relay to make the a/c clutch kick in . I was told by one of your experts I could do it with a paper clip , HOW

  • Marion Price Aug 25, 2010

    DID NOT ANSWER MY QUESTION

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,297 Answers

"jump it out"

can you clarify what you are trying to "jump"
plus year, make, model, engine size and trans type!

Sean

Posted on Aug 25, 2010

  • Sean Reisdorf
    Sean Reisdorf Aug 25, 2010

    it appears you have this posted twice?

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,513 Answers

Hi

Please check the links bellow regarding your query…
http://www.wikihow.com/Jump-Start-a-Car

http://www.ehow.com/video_511_jump-start-car.html

http://autorepair.about.com/cs/doityourself/a/bljumpstart.htm

http://www.carbuyingtips.com/jumpstart.htm


Let us know if you have something more to ask else please accept the solution.
Thanks for contacting fixya.com

Posted on Aug 25, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I charge unit with a male to male on the 12 volt port asking about unit Stanley JS900CS Not Jump-N-Carry


Tool review: Jump-N-Carry jump starter -- Portable model ...

www.autoserviceprofessional.com/.../tool-review-jump-n-carry-jump-sta...
Jun 6, 2014 - The Jump-N-Carry's convenient charge indicator reveals the unit's stored voltage. ... By plugging the male/male adapter cable into the Jump-N-Carry ... This 12-volt DC port also can be used to power 12V accessories (up to 12 ...

Using The Unit As A 12 Volt Dc Portable Power Supply ...


Jan 01, 2016 | Cars & Trucks

Tip

Jump-start Jaguar X-type? it's more complicated than you think.


Jump Start of Vehicle Battery


IF THE BATTERY YOU ARE USING TO JUMP-START THE VEHICLE HAS RECENTLY BEEN CHARGED IT MAY STILL BE GASSING, COVER THE VENT PLUGS OR COVERS WITH A DAMP CLOTH TO REDUCE THE RISK OF EXPLOSION SHOULD ARCING OCCUR WHEN CONNECTING THE JUMP LEADS.

Turn off all electrical ancillary circuits such as radio, lights, indicators etc. If the reason for a flat battery is unknown the condition may be as a result of an electrical short circuit, so care must be taken during the Jump-start process and subsequent to connection to ascertain if this is the case. A short circuit or un-isolated ancillary load can cause arcing when the jump leads are connected, a small 'crackle' is normal but any spark or flash is an indication of a problem that should be rectified before attempting to Jump-Start the vehicle.

Jaguar do not recommended that the vehicle is jump started, and If at all possible it is preferable to replace the flat battery with a suitable fully charged unit rather than jump-start the car. However if it is done it should be carried out by suitably qualified personel. Garage services and services like AA and RAC homestart should be used whenever possible.

Obviously there are occasions when carrying out this proceedure yourself is the only practical way proceed.

If there is no option but to jump-start the discharged battery should be removed and recharged immediately after jump starting to avoid permanent damage.

High quality, heavy duty Jump leads must be used as the current consumption during starting is very high, and a voltage loss will be
exhibited though the jump leads, increasing current requirement.

Make sure that the Jump Start battery is of the same voltage as the vehicle, and suitable to provide the required starting current.

MAKE SURE THAT THE ENDS OF THE JUMP LEADS DO NOT TOUCH EACH OTHER OR GROUND AGAINST THE VEHICLE BODY AT ANY TIME WHILE THE LEADS ARE ATTACHED TO THE BATTERY. ARCING AND VERY RAPID DISCHARGE CAN CAUSE THE BATTERY TO EXPLODE.

Connect the jump leads in the following sequence.
Connect Positive Jump Lead to Jump Start battery positive terminal.
Connect Positive Jump Lead to Vehicle battery positive terminal.
Connect Negative Jump Lead to Jump Start battery negative terminal.
Connect Negative Jump Lead to a suitable vehicle ground point at least, 300 mm (12 in) from the battery terminal e.g. engine lifting bracket, do not do not connect directly to the vehicle battery terminal.

Start the vehicle and rev to 2000 rpm, then allow tickover for 5-10 minutes.

Do not attempt continued repeated starting of the vehicle, this will cause heat build up at the terminals and though the jump leads degrading the leads performance and adding to voltage loss.

Allow 3-4 minutes recovery time for the leads and Jump Start battery between attempts to start.

Before disconnecting the jump leads, switch on the heated rear screen, to reduce the alternator voltage peak when the leads are removed, as this can damage electronic equipment.

Disconnect the jump leads in the reverse order to the connecting sequence taking great care not to short the ends of the leads.

Do not rely on the alternator to restore a discharged battery.
Ensure that the battery is recharged or replaced with a fully recharged unit
as soon as possible.

Following Jump-starting of a compleately discharged battery, you may need to carry out a Green ECM drive Cycle, this will allow the powertrain control module to 're-learn' idle values, and most likely need to re-enter your radio code, details of these can be found at. http://www.bluejag.co.uk

on May 31, 2010 | Jaguar X-Type Cars & Trucks

1 Answer

I own a 1990 geo tracker 4x4 with automatic transmission it jumps out of 3rd gear


jumps.?
hot and cold engine do this? both?

does jumps mean.
OD kicks in and out.
or jumps to 2n
or jumps to false neutral, (called SLIPS, or FLARE)

this trans is 99.5% mechanical, Hydramatic shifted trans, except OD.
we cant help you if you dont say what it jumped TOO.

make sure the linkage to the shifter is workiing correctly.
check trans ATF levels (dexron III or higher) per the operators
guide.

3L30 pages , your tranny is called this.
http://www.fixkick.com/slush-pump.html#3L30

Aug 29, 2014 | Cars & Trucks

1 Answer

Jump start


I would say you never checked to see if the battery is any good

I most likely is dead or below 12.6 volts & you never jump a dead
battery,you try charging it

Jumping is not charging a battery,you need to own a battery charger

If the battery keeps draining or won't hold a charge you need
a new one,then if the problem exists you have someone do a
Parasitic Current Test to find out which circuit is staying on

Aug 27, 2013 | Infiniti Q45 Cars & Trucks

1 Answer

I have a 2005 Jaguar S Type and want to know if I can jump start the battery like you do other cars?


It can be jumped. Check for remote jump starting posts under the hood. If there are none, then whichever is easier: jump the battery or remove it and charge it up.

Feb 09, 2013 | Jaguar S-Type Cars & Trucks

1 Answer

WOULD A STARTER BE THE PROBLEM IF THE CAR NEEDED A JUMP


Your starter solenoid is the problem.Replace the solenoid.

Feb 17, 2012 | Cars & Trucks

3 Answers

Is it good to jump start a car with a new vehicile


Yes it is ok to jump start a car with new car

Feb 22, 2010 | 2008 Jeep Wrangler

1 Answer

Lost all electric power in car. Drove it 15 miles parked and 1 hour later nothing. The remote door unlock did not work and the dome light did not come on after manually opening. Tried to jump no luck. any...


This happened to me two weeks ago, i tried to jump it and nothing, sor I repalced the battery. A few days later I got a flat, and told the service guy at the shop what happened. He checked the voltage on the "jump points" and told me the jump points weren't connected to the battery. I found out that if you need to jump this vehicle, remove the fuse block,a nd put the jumper cables directly on the battery. I spent 100 bucks on a new battery for nothing!!!

Lesson Learned: Chevy "Jump Points" make me want to jump off a bridge!

Jul 11, 2009 | 2006 Chevrolet Equinox

4 Answers

Car wont start; tried jumping didnt work; batterie should be fine


How old the car and battery is?

when you jumping the car, did you start another car's engine?

Jul 27, 2008 | Honda Accord Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

16 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...