Question about 1987 Honda Prelude
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Its probably your speed sensor mounted on the back side of your transmission on top of the final drive gear. Its the sensor/plug located just under the shift linkage. Make sure its bolted down tight and check for any loose connections.
Posted on Aug 15, 2009
As your car has a handbrake fitted to the rear calipers,you will need a piston wind in tool to retract the piston fully back into the caliper as when you adjust your handbrake the piston automatically winds itself to the required position for usage without this tool you are getting nowhere,so get hold of a tool to do the job and you should not have problem unless the piston has totally siezed on the screw then you will have a problem being the only way to repair would to be a new or refurbished caliper.
Posted on Mar 01, 2010
Testimonial: "Thank you so much-had no idea about the tool-exactly what I needed!"
Tips for a great answer:
Sep 30, 2012 | 1989 Honda Prelude
Feb 01, 2018 | 1990 Honda Prelude
Feb 21, 2011 | 1987 Honda Prelude
Jun 28, 2017 | 1987 Honda Prelude
Apr 12, 2010 | 1987 Honda Prelude
Feb 28, 2010 | 1992 Honda Prelude
Jan 20, 2010 | 1987 Honda Prelude
Jan 04, 2010 | 1987 Honda Prelude
87 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: