Question about Ford Taurus

1 Answer

Trans stopped pulling.could it be filter?cvc good

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,102 Answers

Hi, the first thing i would do is change the filter and the fluid as this is the most likely cause but if you still have problems after that then you need to start looking at thins like torque converter.

let me know how you get on or if you need further assistance ok

plz rate this solution as i have pages of unrated posts, thanks

Posted on Aug 25, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2002 f150 shift to soon from 1st to 2nd unless you really mash the accelerator it also shifts into over drive to soon. If pull up to a stop sign st snd start off mo


How many miles on your trans fluid? Trans filter? Have you ever had your trans fluid power flushed/vacuumed out? Check local discount coupon books for a discount. Go to a transmission place have it flushed(costs a few bucks more) and ask about the transmission's performance. At least they can look at it, maybe adjust it, & you get a diagnoses for free. Good luck.

Aug 31, 2015 | Cars & Trucks

1 Answer

Location and access to Transmission Filter to change Trans. oil and Filter


Hi Lb,
My car is RX300 1999 and has the same problem. I changed the fluid 2 years ago after the trans slip and lost the shift. Afterwards it worked for another 2 years. But recently it doesn't work again even I change fluid and put Stop Slip additive to the trans. I was told the trans has to be rebuilt. So changing fluid and filter can help to maintain the trans for sure and can prevent problem. But if the trans has already worn a lot, it can't help at last.

Feb 15, 2014 | Cars & Trucks

1 Answer

Steerinf issues


My guess is that you have a cvc joint that's gone bad.. (A cvc joint is a joint in the kind of drive shaft (axle) that comes out of the trans-axle to the wheel.) I'm thinking you need a shop for this problem. It's not an easy repair for a novice. You'll probably need to have the joints on both axles repaired.

Dec 03, 2013 | 1990 Chrysler LeBaron

1 Answer

2001 chevy 2500 hd 4x2 allison trans seems to loose pressure after coming to a stop, have to rev engine for a few seconds before it pulls again, whats up with that? 88800 miles


I would start
by changing both trans filters and fluid, makesure you put dex VI in trans then if still having problems take to someone with a Tech 2 scanner and have them reset the trans adapts and try that, what it does is resets trans to factory (new) mode and then as you drive the truck it will adjust to your driving habits and shift points, but loosing pressure makes me think one of your filters is partially plugged...there is a spin on cartridge and the internal one in pan, change em both..good luck

Apr 10, 2012 | 2001 Chevrolet Silverado 2500HD

1 Answer

I have a 2005 pacifica, it made a pop noise and wouldnt go forward. now it goes forward an not in reverse. i can also hear the gears shifting, could that be the tran. filter? if so where is it located?


may be a trans filter but the pop noise concerns me to but the trans filter is located under the vehicle and you pull the pan down catch all loose fluid 8 quarts or so and then pull filter off then just put new filter in and new gasket rebolt pan to trans and refill with new fluid also clean the magnent off thats in the bottom of the pan


if i helped please give me good rating thank

May 06, 2011 | Chrysler Pacifica Cars & Trucks

1 Answer

How do you tell if a cvc joint is broken without pulling everything apart


If the CVC joint is broken, the car would not move. I assume that you are hearing unusual noises in the drivetrain. It is worthwhile to have a certified mechanic take a look at the car to determine if the CVC needs to be replaced, before serious problems develop.

Dec 12, 2010 | 1998 Dodge Grand Caravan

1 Answer

Cvc to motor


Yes. You will not be able to get the motor out unless you remove the axle

Apr 01, 2009 | 1993 Chevrolet Cavalier

2 Answers

Have a 2001 Buick LeSabre. Vibration turning left . Think it may be CV Joint. How do I pull the axle out to check CV Joint?


Rasie vehicle, remove tire, axle nut and caliper. remove tie rod end from spindle, remove lower ball joint nut and seperate from spindle and pull spindle from axle, with pry bar pop axle out of trans housing. it is easyer to replace cvc axle than to replace or repair cvc joint.

Nov 29, 2008 | 2001 Buick LeSabre

1 Answer

Transmission


Most likely you have a control issue, have a trouble code test run on the system and see if any transmission codes are present, this is an electronically controlled trans, it has it's own computer, that takes info from driving conditions and makes gear changes and such through a bank of electric solenoids located inside the trans case, when this trans stops engageing don't drive it, you could ruin the forward clutchs and this would require a very costly overhaul. Zero in on the shift solenoids, they or the valve body is causing this. Best of luck.

Oct 21, 2008 | 1998 Mitsubishi Galant

1 Answer

RAM 1500 OBD CODE p0700/p0740


I had the same problem and a friend suggested that I get a filter kit for the transmission. My dodge ram 1500 stopped pulling and had to be towed home. I got a filter kit for the transmission and now the truck is runniing good again and the transmission is shifting ok.To get the code off by going to
Auto Advance and used their code reader to erase the code. My truck has 249K on it and I know the trans will not last forever, but as long as it is running ok. I will live with the codes but make sure the trans fluids are changed every 10k.

Oct 04, 2008 | Dodge Pickup Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...