Question about Chrysler Sebring

1 Answer

My window on the driver side does not come up or down. I have a 2001 Chysler Sebring with the 2.7 liter engine. How do I know if it is a switch that needs to replaced or the motor?

Posted by on

  • wbuker12 Aug 25, 2010

    I appreciate it. I will check it out

    Thanks for the help.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Champion:

    An expert who has answered 200 questions.

  • Contributor
  • 264 Answers

You will need to check and verify that the fuses and relay for the power windows are good, then check for power and ground operation of the switch. With out the proper DVM and wiring diagrams this can be tricky. I would first check to see if you can pull the glass up by hand. I have found the most common failure for these windows is the regulator and motor assemblies.

Posted on Aug 25, 2010

  • wbuker12 Aug 25, 2010

    Ok I will check the fuses first which is the easiest thing to do. Also I cannot pull up or push it down by hand.

  • wmstalk Aug 25, 2010

    A quick check of power at the motor will help determie if your switch is working. If power and ground are present at the motor then you know the switch is working and you have a fault in the motor or regulator. Hope this helps. Happy motoring

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Belt routing for 2001 Sebring 2.4 engine


Jeff, Check the attached links for your 2.4 belt routing,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Repair Guides Engine Mechanical Components Accessory Drive Belts 2...
How to Change Serpentine Belt on 2002 Chrysler Sebring
http://www.serpentinebeltdiagram.com/serpentine-belt-diagram-2001-chrysler-sebring-4-cylinder-24-liter-engine-alternator-and-air-conditioner-with-dohc-engine-02236

Jul 31, 2016 | Cars & Trucks

1 Answer

Where is the fuel pump regulator for a 2001 chysler sebring convertible


The fuel pressure regulator should be in the fuel rail on the engine.

Sep 15, 2012 | Cars & Trucks

1 Answer

How can i manually get the window down on my 2001 sebring


You would have to take the door panel off and disassemble the window regulator. Your window motor may have died since it is used the most.

Jun 22, 2012 | 2001 Chrysler Sebring

1 Answer

Chysler sebring 2001, Hesitation while driving looks to have jumped time. some times hesitates tio start then throws an engine light. Is this a timing chain issue? It's happening more frequently.


Read and write down OBD codes . Flick ignition key back and forth quickly 3 times from on to off and write down all the codes dispalyed on the odometer. google make model OBD codes on net and find out what is wrong with your car.

Aug 18, 2010 | 2001 Chrysler Sebring

2 Answers

On a 2001 chrysler sebring coupe lxi 3.0 where is the O2 "oxygen sensor" physically located, computer says bank1 sensor2. I know Bank 1 is the side where the #1 cylinder is which I "think" is on the...


the only sensor that would be on your manifold would be the o2 sensor ihave an intrepid i have four, two converters. 1 before each converter and 1 after each converter. fronts are 1s and backs are 2s all are 4 prong maybe your backs are threes you will need to investigate a little more after all we are dealing with pretty much the same car same year

Jan 11, 2010 | 2001 Chrysler Sebring

1 Answer

Power Window problem sebring sedan 2001


it could be possible that the window switches on each side as gone bad or possibly you have a shortage dnt know how exactly to pin point the shortage without an amp or voltage tool..but if the master window switch is working fine then yes you do have a shortage or bad switches but while you are at it check all window fuses

Nov 21, 2009 | 2001 Chrysler Sebring

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8557 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...