Question about 2006 Chevrolet Equinox
Hello, to change the O2 sensor follow this steps:
1. Set the parking brake if the engine has been run recently, let it cool for a few hours before you start.
2. Raise the vehicle with a hydraulic jack and place the jack stand under your trackers frame to supports its weight. Lower the hydraulic jack and set it aside.
3. Craw under the engine on the right hand side(drivers side) near the driver's door. Locate the catalytic converter, which is mounted in-line with the exhaust pipe.
4. Locate the oxygen sensor which is mounted in the exhaust pipe near the rear of the catalytic converter.
5. Remove the wiring harness connector from the oxygen sensor by squeezing in the connector tab with your finger while simultaneously pulling the connector from the sensor.
6. Remove the sensor from the exhaust pipe by turning it out with an adjustable wrench in a counter clockwise direction.
Posted on Aug 25, 2010
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
May 04, 2014 | 1998 Ford Expedition
Mar 10, 2014 | Pontiac Cars & Trucks
Oct 12, 2013 | 2001 Chevrolet Impala
Jul 05, 2011 | Buick LeSabre Cars & Trucks
May 19, 2011 | Chevrolet Chevy Cars & Trucks
Jun 16, 2010 | 2005 Pontiac Sunfire
Apr 29, 2010 | 1996 Jeep Grand Cherokee
Mar 28, 2010 | 2000 Toyota Tundra
Feb 15, 2009 | 1996 Ford Mustang
Feb 24, 2017 | 2006 Chevrolet Equinox
865 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: