Question about 2006 Volkswagen Jetta

1 Answer

Just bought a used 2006 Jetta. Low beams are very low. They do not pan out more than thirty feet in front. Can you tell me what the problem may be?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 208 Answers

First find (if your car have) this Just bought a used 2006 Jetta. Low beams are very - protuha_16.jpg and turn the right rolled to the smallest number. If that dont help, use the screw on head lihgt to adjust the light beam.protuha_17.jpg

Posted on Nov 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Low Beam Wont Turn on, High Beam Yes


I remember a similar problem, replaced the dimmer switch , problem solved, maybe its the same for you, autozone has a website, when you clickon this part, it tells you why it needs replaced, pretty cool , give it a shot, see what happens. tell the parts store you bought the light from what happened, they can help you, customer service is there job !

Jan 13, 2013 | 2006 Mitsubishi Lancer ES

3 Answers

WHAT ARE THE SPECS TO ALIGN Headlights for 2006 chevy colorado


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Nov 06, 2009 | 2006 Chevrolet Colorado

3 Answers

Where are the headlight adjustment screws on a 2006 mercury milan?


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Sep 17, 2009 | 2006 Mercury Milan

2 Answers

How do you adjust the headlights on a 2006 dodge ram 2500 ?


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Jul 28, 2009 | Dodge Ram 2500 Cars & Trucks

1 Answer

Headlight adjustment


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

May 08, 2009 | 2006 Nissan Maxima

1 Answer

Front end light adjustments


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Mar 22, 2009 | 1999 Volkswagen Jetta

1 Answer

Headlight out


you must remove the headlight,take off front gril,bumper then you can reach headlight

Jan 31, 2009 | 2006 Volkswagen Jetta

1 Answer

Low beam headlights don't work


https://s12.postimg.org/6o2zcv3hp/jetta_headlamps.jpg

Click on the link.
This is for 03 jetta gls
There are fuses for left and right low beams. Headlights on low beam, use a test light, see if voltage on fuse circuit? If no voltage that will lead us back to dimmer switch or problem with wiring circuit from dimmer switch.

May 26, 2017 | 2003 Volkswagen Jetta TDI

1 Answer

My head light are real low how do i raise them?


There are adjusting screws on the headlight mounts, three of them I think. You may need a torx or allen wrench. Shine your low beams at the garage door or something and make the adjustments. Be careful not to let the low beams shine in other drivers' eyes. When you think it is right, park at night where you can walk in front of the car 100 feet or so and see that the low beams are not too high. The driver side light should point straight ahead, the passenger side light somewhat to the right.

Nov 15, 2008 | 1997 Chevrolet Tahoe

1 Answer

Front lights


look at the head lights assembly. find some phillips screw there. two of them .either one on top and one on the side. these are the adjusting screws.

do it at night. park the car in front of a wall about 6 feet away and adjust the lights.

tnx 4 using fixya,


drcool



Nov 05, 2008 | 2006 Chevrolet Colorado

Not finding what you are looking for?
2006 Volkswagen Jetta Logo

229 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8572 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...