Question about Saturn SC

1 Answer

Need to know the part of the engine that is inbetween the valve cover and the head on a D.O.H.C. engine 4cylinder.

Posted by on

  • A Miller Aug 25, 2010

    the gasket???

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,190 Answers

From tour description it sounds like you are refering to the ignition module assembly

Posted on Aug 25, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are the torque settings for head bolt on a for Ford 2000 4cylinder year between 1965-1975? Also, what should the valves be set on?


try this, it is the felpro torque spec book that covers every engine for the past 100 years
its free, and is on my sight, no registering, nothing but viewing or downloading, its a pdf file so you will need adobe reader or equivalanat.
enjoy
https://www.filesanywhere.com/fs/v.aspx?v=8b6f63875f636e77b06e

Mar 20, 2015 | Ford Cars & Trucks

1 Answer

Spark plugs location-4cylinder engine


Sparkplugs are located on top, remove the top cover over the valve cover and you will see coils going into holes on the top of the valve cover, remove the coils unplug connector and your plugs are located under each coil, good luck.

Feb 26, 2011 | 1999 Kia Sportage

2 Answers

Need to know where the engine intake valve is located


May need to clarify what you are needing. There is an intake manifold that feeds gas and air to the the engine usually the top.
Also each cylinder has 1 to 2 intake valves in each cylinder so a v/8 has 8-16 intake valves. they are located in the heads and are partially visible by removing the valve covers. To re seat a valve you have to remove the heads.
Clarify so we can help more

Feb 15, 2011 | 1996 Ford Econoline

1 Answer

Check engine light on on 2005 honda accord coupe. 4cylinder. code is p2647 said trouble shooting do all repairs on vehicles but do not know that code.


p2647 is rocker arm actuator A- bank 1 stuck on--- to fix it should be the VTEC oil pressure switch. That switch will be on the cylinder head. Towards the windshield and passenger's side (I think).

Go to www . hondapartsdeals . com {remove the spaces when typing}

Go to parts, enter your car's info. System: Engine Component Vtec Oil control valve. That diagram should help a lot.

Good Luck.

Jan 27, 2011 | 2005 Honda Accord

1 Answer

Where is the cam sensor relay located on a 2004 Dodge Stratus?


If you mean the camshaft position sensor it is on the right hand side of the engine up near the valve cover on the 2.4L 4cylinder engine.

Jan 23, 2011 | 2004 Dodge Stratus

3 Answers

I have a loud ticking under my valve cover. 97 ford escort. I think its a loose valve but is it some thing i can fix. I know a little about cars. but not an expert


not a valve, but a lifter. I will paste procedure below. You judge if you can do it or not. Recommend you replace them all while you're in there. If you let this go, the lifter will wear out the camshaft. Lifters are $22 each, and you have 8 of them. You will also need a new valve cover gasket.
Please let me know if you have questions, and thanks for using FixYa.

2.0L Engine
SOHC engine
See Figures 6, 7, 8 and 9
  1. Disconnect the engine air cleaner-to-valve cover hose from the cover by compressing the hose clamp with pliers and sliding the clamp back, then separate the hose from the cover.
  2. Remove the spark plug wire separators from the valve cover and set the wire assemblies aside.
  3. Unfasten the three valve cover retaining bolts.
  4. Remove the valve cover and gasket from the cylinder head.
WARNING Do not use any abrasive grinding discs to remove gasket material. Use a plastic manual gasket scraper to remove the gasket residue. Be careful not to scratch or gouge the aluminum sealing surfaces when cleaning them.
  1. Remove the old gasket material from the cylinder head and valve cover mating surfaces.

jturcotte_163.jpg

Fig. Fig. 6: Remove the spark plug wire separators from the valve cover

jturcotte_164.jpg

Fig. Fig. 7: Compress the engine air cleaner-to-valve cover hose clamp with pliers, and slide the clamp back ...


jturcotte_165.jpg

Fig. Fig. 8: ... then disconnect the hose from the valve cover


jturcotte_166.jpg

Fig. Fig. 9: Unfasten the valve cover retainers and remove the valve cover-2.0L SOHC engine


If removing more than one valve lifter (tappet), mark the lifters and their locations as they must be installed in their original bores.

  1. Remove the rocker arm(s).
  2. Unfasten the lifter guide plate retainer.
  3. Remove the guide plate and the lifter.


To install:
  1. The oil feed hole in the lifter must face away from the oil feed hole in the cylinder head.
  2. Lubricate the lifter(s) with clean 5W-30 engine oil and install them in their original bores.

Make sure the lifter guide plate retainer tabs are towards the rear of the cylinder head, and the lifter guide plate tabs are towards the front of the cylinder head.
  1. Install the lifter guide plate and tighten the retainer.
  2. Install the rocker arms.
Do not use any sealer with a silicone type gasket.
  1. Install a new gasket and the valve cover.
  2. Install and tighten the valve cover retainers to 71-97 inch lbs. (8-11.5 Nm).
  3. Attach the spark plug wire separators to the cylinder head.
  4. Connect the engine air cleaner-to-valve cover hose and engage the hose clamp

Jan 19, 2011 | Ford Escort Cars & Trucks

2 Answers

Can i just replace the head gaskets or do i need to replace alll gaskets


when u replace the head gaskets u must also replace any parts gasket that u remove (valve covers, intake manifold etc.) to get the heads off, they sell what is called a "Valve Grind" gasket set that is what u need, it will have all the gaskets in it u need..

May 27, 2010 | 1991 Buick Century

2 Answers

How do i locate the spark plugs for my 2004 acura rsx engine


you have to remove the plastic cover attached to top of valve cover,once removed you'll see where coils drop into cylinder head through valve cover.remove and plugs (5/8 socket)sit down below coils.

Aug 02, 2009 | 2001 Kia Sephia

1 Answer

Pvc valve location on 95geo prizm


Both the 1.6 and 1.8L 4cyl. engines have the pcv valve located in the valve cover @ top of engine. It's usually just pushed in a rubber grommet on the valve cover. Twist while pulling, and it should come out. Let me know how you make out.

May 31, 2009 | 1995 Geo Prizm

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...