Question about 2006 Toyota Corolla

1 Answer

There is a part inside the dome light that is broken and not making contact. It is not where the bulb goes. I can push on the switch on the outside and the light will come on. So it is working, I just need to replace the broken part that looks like it just snaps in. Is that part sold separately? My car is a 2006 Toyota Corolla LE.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 157 Answers

If you call your local Toyota Dealer , they can bring up the picture of the area you are referring to, most of the time you give them the VIN of the vehicle and they can pull up all that information for you.

Good Luck.

Posted on Aug 25, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 Dodge Ram 1500 radio and inside dome light sre not working. Radio 15A fuse is good. What do I look for?


Hi Steve:
You may have 2 separate problems so I'd try to approach it that way. RADIO - On this older truck, it may be that there is a separate in-line fuse for the radio. If you can see under the dash where the wires come from the radio, look for a red or black one that has an in-line fuse holder. Push the ends inwards and twist counterclockwise, then pull apart to get at the fuse. It is also possible that the "accessory" terminal of the ignition switch is no longer working. A continuity meter should help you resolve that.
DOME LIGHT - Pull the bulb and test to make sure it's working. Check for power at the bulb connection receptacle (socket). Dome lights typically are switched from the doors or by rotating the light switch. If the bulb is good, it should be a hide and seek game to find where the power is, and where it isn't. The shorter the distance between these points, the closer you are to the problem.
Patience, and a sense of humour. You'll get it.

Mar 11, 2015 | Dodge Cars & Trucks

1 Answer

How do I replace dome light on Matrix 2009


Remove the key from the ignition. Make sure the doors are closed, so the new bulb does not illuminate when you are installing it.
Make sure the dome lighting switch is turned to the "Off" position. Pry the plastic lens away from the dome light. Use a small, flat-head screwdriver.
Push back the side bulb clamp. Pull out the old dome lightbulb. Wipe the area with a paper towel if it is dirty.
Wrap the new bulb in a paper towel. Insert it into the dome lightbulb holder. Push it up gently to secure it.
Turn the switch to "On" to test the bulb. Reposition the cover and push up to lock the clips into place.

May 28, 2013 | Cars & Trucks

1 Answer

I have a ford 6600 tractor not exactly sure of the year probably around 1977-1980. the 3 point lift arms wont lift worked fine then sat for a year when the clutch went out fixed that and now the lift arms...


Remove the key from the ignition. Make sure the doors are closed, so the new bulb does not illuminate when you are installing it.

Make sure the dome lighting switch is turned to the "Off" position. Pry the plastic lens away from the dome light. Use a small, flat-head screwdriver.

Push back the side bulb clamp. Pull out the old dome lightbulb. Wipe the area with a paper towel if it is dirty.

Wrap the new bulb in a paper towel. Insert it into the dome lightbulb holder. Push it up gently to secure it.

Turn the switch to "On" to test the bulb. Reposition the cover and push up to lock the clips into place.

May 28, 2013 | Cars & Trucks

1 Answer

Brake lights & Hazzard lights don't work; fuse ok... High mounted center brake light works... Turn signals work...suspect problem is multifunction lever Power drain to battery constant...2...


As for the brake lights push brake pedal down while pushing on and wiggling the hazard switch.If the brake lights come on then replace the multi-function switch.

Aug 10, 2011 | 1997 Oldsmobile Bravada

1 Answer

Help - The dome light in my 1998 Cavalier wont turn off. We have checked all the door switches, turned the dimmer switch for the dashboard with no effect and basically pushed every other button, switch we...


there is a plunger switch on each door and one on the dimmer you can disconnect each switch one by one until you find the problem. I would check the condition of each switch first making sure none are stuck, broken or bent

Dec 29, 2010 | 1998 Chevrolet Cavalier

2 Answers

How to replace interior dome light bulb?


1) Remove the key from the ignition. Make sure the doors are closed, so the new bulb does not illuminate when you are installing it.

2) Make sure the dome light switch is turned to the "Off" position. Pry the plastic lens away from the dome light. Use a small, flat-head screwdriver.

3) Push back the side bulb clamp. Pull out the old dome lightbulb. Wipe the area with a paper towel if it is dirty.

4) Wrap the new bulb in a paper towel (oil from your skin will shorten its life). Insert it into the dome lightbulb holder. Push it up gently to secure it.

5) Turn the switch to "On" to test the bulb. Reposition the cover and push up to lock the clips into place.

If the bulb doesn't work, you've got a bad switch somewhere, probably on the drivers door.

Dec 26, 2010 | 2006 Toyota Highlander

2 Answers

My dome lights on my 2008 Buick Enclave do not go on anymore when the car door opens. I tried to push the dome light override button in and out and it doesn't make any difference. They still don't go on....


make sure the dome override switch is depressed. The switch is located just above the rotating knob which dims the interior ligthts. The dome overide switch is located just to left of the steering column.

Jan 27, 2010 | 2009 Buick Enclave

1 Answer

How do i replace the dome light in my 97 corolla


The dome light is mounted on the ceiling of the car.
You would need a small flat-end screw-driver, and aim it to the base of the lens cover. Then pry the lens off.
If you cannot remove the bulb with your finger nail, then pry it out at its end. Or simply push back the bulb's contacting spring at the end of the bulb. Then steady your hand to catch it as it drops down.
Replace the lens by pushing it back to its housing.
Test the dome-light if it works. If it doesn't check the dome's door switches screwed to each door frame. Pushing on the door switches several times sometimes refreshes the dome-light. The door-switches can be removed with a medium-size 4-corner screw-driver.
By removing the black covers of the door-switches, their conditions could be detemined. Spray some electrical contact-cleaner on them if corroded, or simply replace with new ones.

Dec 14, 2009 | 1995 Toyota Corolla

1 Answer

Dome/ Trunk Lights don't work


The dome light problem is likely that the crappy switches that get pushed in when the door closes don't make contact when opened. You can find them at the lower right corner of the door sill. (Driver's side door. Same relative position on the other doors.) Take a phillips screwdriver and remove them, AFTER removing the correct fuse. Spray the inside of the switches with contact cleaner. Grab the black nub of the switch and twist it while holding the switch body still.

The trunk has a weird setup. the switch contact is where the trunk latch is. When the trunk is closed, the simple spring switch is held open so the light turns off. When trunk is open, the switch closes and the bulb lights. Hope this helps.

Jan 08, 2009 | 1997 Plymouth Neon

Not finding what you are looking for?
2006 Toyota Corolla Logo

Related Topics:

171 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7754 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...