Question about 1990 Toyota Camry

1 Answer

I have a 1990 Camry,power windows and power door locks wont work,I have changed all fuses on both sides of car and the master control in the drivers door and still wont work.Any ideas that may help.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Did you check under the hood for a relay? it should be listed on a diagram in your owners manual. if you dont have one, a repair manual should show it,you can sometimes find an open one @ your local parts store.

Posted on Aug 25, 2010

Testimonial: "thank you we will change out the relays under the hood,good help thank you again "

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ecectric windows and locks will not work


POWER WINDOWS AND LOCKS
Window fuse's and relay's may be up under driver or passenger side dash or behind glove box, under the hood and even under the seats, and finally on the ends of the dash. All passenger power windows and locks are controlled thru and get power from the master control switch on the drivers door.

May 14, 2012 | 1999 Toyota Camry

1 Answer

My 91 camry has power windows, but the driver side controls wont roll down any of them [even the driver window] the window and door lock buttons work but thats it. I have switched it out with one from the...


I had the same thing happen on my 1989 model a few years ago, the part from the salvage yard was junk and when I bought a new one from the dealer at 120 dollers it worked fine. Since this is the master control it must be an excat match. Have you looked at the fuses and determined none of these are blown? Not much else it can be unless the wiring harness is bad. Make sure all the pin connectors on the switch are straight and clean.

Feb 27, 2011 | 1991 Toyota Camry

2 Answers

1990 camry power windows and locks donot work from drivers side also automatic seatbelt on drivers side stoped working the power lock button on passenger side works


Relays & fuses will be my first choice, but sometimes age and wear kils electronic switches, my next advice woul be your driver side control side panel inside the panel at the door may carry fuses or relays or the control panel switch may be faulty itself chec your repair book for your automobile.

Jun 29, 2010 | 1990 Toyota Camry

2 Answers

Power windows and door locks don't work


Check fuses first, then check power window master switch. If old car check broken wires between driver door and body..

Sep 06, 2009 | Toyota Corolla Cars & Trucks

1 Answer

1990 toy. camry. intermitent problem with electric window controls (drivers) and (drivers) automatic seat belt. now completely stopped working. ??


Did you check the fuses? open the drivers door should be down there above the pedals, if more major problem open the hood and check the fuse box on the driver side of the car, more fuses are stored there

Jul 25, 2009 | 1990 Toyota Camry

1 Answer

96 Camry Power Window problem


the power windows of most toyotas only works if the master switch located on the drivers side is good. remove the master switch check for burned traces on the printed circuit board. solder a jumper wire across the burned part and it should work

May 30, 2009 | 1989 Toyota Camry

1 Answer

Power window issues in 97 Camry [relay]


have you got the child lock button pushed down it would have a picture of a window with an "X" on it also have you checked all the fuses in your fuse box

Mar 29, 2009 | 1997 Toyota Camry

1 Answer

Toyota Camry power windows not working from master switch


Their are two fuses that power this system. One is a 15 amp gauge fuse and the other one is a 30 amp main power fuse. You can also check the power main relay, your ignition switch, or i could possibly be a fault in the wiring

Mar 11, 2009 | 1996 Toyota Camry

1 Answer

1990 camry power window problem


It is rare that the power window relay will fail. Personally, I would look to see if there is power at the master switch on the driver's door. Anywhere. If the is NO POWER, you have a broken wire between the door & the LF kick panel where the wires come thru the body into the door shell. If there is power, the master switch is narmally the culprit

Jul 25, 2008 | 1999 Toyota Camry

Not finding what you are looking for?
1990 Toyota Camry Logo

Related Topics:

145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8202 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...