Question about 1991 Acura Integra Hatchback
Replace the switch on the brake pedal.the brakelights are the only lights that are not affected by the ignition being turned off.(allways powered.)
Posted on Aug 25, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Your brake switch is just hung up. it is located directly above the brake petal and is attached to the petal bracket-use a flashlight and get down low enough to see up under the dash where your brake petal is, it will be hooked onto the petal bracket-just move it, it is probably just mis-aligned.
Posted on Jul 20, 2011
Sounds to me like the brake light switch is shorted and needs to be replaced. The brake light switch should be under the knee bolster above the brake pedal. Go to your nearest dealer and get a brake light switch and swap it out.
Posted on May 28, 2009
SOURCE: My daughter's 1994 camry power
short in wires that might be touching the ground of car so you can check first fuses to see if any are blowned and then check the connectors wires that is going to the main driver side switches with a multimeter to see where the problem is at.
Posted on May 31, 2011
Tips for a great answer:
Jan 07, 2014 | Pontiac Grand Am Cars & Trucks
Jul 04, 2012 | Cars & Trucks
Sep 21, 2011 | 1988 Nissan Pathfinder
Aug 23, 2011 | Ford Escort Cars & Trucks
Jul 20, 2011 | 1990 Toyota Tercel
Jul 12, 2011 | 2001 Toyota Sienna
Jul 10, 2011 | 2004 Dodge Stratus
Dec 05, 2009 | 1999 Ford Windstar
May 11, 2009 | 2007 Mini Cooper S Convertible
70 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: