Question about 2003 Ford F350 Super Duty DRW SuperCab

1 Answer

My braks on my 03 f350 r locking up i just put all new calipers pads and pins

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 4,369 Answers

I would gravity bleed the system by loosening one bleeder at a time till no bubbles come out. If that doesn't work, pressure bleed the system.

Posted on Aug 25, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 98 durango one caliper bolt on front passenger side came out I put new one in and now the brake seems to be locking up


William, did you use the correct bolt(length), did you check all brackets, sliders, seized caliper, pads for damage, free movement, etc.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

How To Install Replace Brake Pads and Rotors Dodge Durango Dakota 97 03...

How To Replace the Front Brakes on 98 03 Durango

How To Replace Front Pads And Rotors Dodge Dakota

Mar 21, 2016 | Cars & Trucks

3 Answers

Replacing the brake pads on a 2008 hyundai tiburon


you'll need to compress the caliper using a c-clamp to push the pad back

Aug 27, 2012 | Hyundai Tiburon Cars & Trucks

1 Answer

How to replace front discs and pads


Front brakes are very simple to do:
  • Pull off the front tires.
  • Remove the brake pads by removing the slide pin bolts where the piston assembly attaches to the caliper mounting bracket. The slide pin bolts are usually a 12 or 14mm bolt. Once the piston assembly is free slide the old brake pads out.
  • Compress the piston back into the caliper by using a large pair of channel lock pliers or a c-clamp. If you don't do this, you won't be able to get the new pads on.
  • Before you put the new pads on, replace the rotor.
  • Remove the two bolts for the caliper mounting bracket. They are in the back and are bigger than the slide pin bolts. Usually a 17 or 19mm bolt.
  • Pull off the caliper mounting bracket.
  • At this point the old rotor should slide right off. If it doesn't slide right off, look for a screw in the center of the rotor, some cars will have a screw there to hold the rotor on. If there's no screw and it still won't come off, try tapping it with a hammer. If you're replacing the rotor, don't be shy.
  • Put the new rotor on. Make sure to clean off any grease with brake cleaner that may be on the braking surface from packaging.
  • Put the caliper mounting bracket back on.
  • Put the new brake pads on. Make sure to use some anti-squeal grease on the back of the pads.
  • Put the caliper assembly back on with the slide pins. Grease up the slide pins as well.
  • Put the wheels back on.
  • Make sure to pump your brakes 10 - 15 times before you drive off. Because you compressed the piston back into the caliper, the piston will not be contacting the brake pads unless you pump the brakes.

Good Luck!
~Brandon

May 27, 2011 | 2002 Mitsubishi Lancer

1 Answer

Vibration in rear of vehicle when braks are applied


I believe that the rear discs are warped or the tires are out of round when braking. More likely, the discs. --- The following are the instructions for replacing the front and rear pads for the front/back rotors. 1999-01 Grand Cherokee Front
  1. Drain 2?3 of the brake fluid from the front reservoir. Use the bleeder screw at the front outlet port to drain the fluid. If equipped with anti-lock brakes, relieve the system pressure.
  2. Raise and safely support the vehicle.
  3. Remove the wheels.
  4. Insert a small prybar through the caliper opening and pry the caliper (using the outboard brake pad) to bottom the pistons in the caliper bore. NOTE: This will back the brake pads off of the rotor surface to facilitate the removal and installation of the caliper assembly.
  5. Pry the caliper support spring out of the caliper.
  6. Remove both caliper slide pin bushing caps and slide pins.
  7. Lift the caliper from the anchor.
  8. Using a piece of mechanics wire, support the caliper so there is not tension on the brake hose.
  9. Remove the brake pads from the caliper. Fig. 2: Installing the inward brake pad on the front caliper pistons - 1999-01 Grand Cherokee 93026g92.gif
    To install:
  10. Position the brake pads onto the caliper.
  11. Position the caliper into place on the anchor.
  12. Coat the caliper slide pins with silicone grease and torque them to 21-30 ft. lbs. (29-41 Nm). Install the slide pin bushing caps.
  13. Install the caliper support spring in the top of the caliper under the anchor; then, install the other end into the lower caliper hole. NOTE: Hold the spring in the caliper hole with your thumb while prying the spring end out and under the anchor.
  14. Fill the master cylinder with fluid and bleed the brake system.
  15. Before driving the vehicle, pump the brakes several times to seat the pads.
  16. Install the wheels.
Rear
  1. Drain 2?3 of the brake fluid from the front reservoir. Use the bleeder screw at the front outlet port to drain the fluid. If equipped with anti-lock brakes, relieve the system pressure.
  2. Raise and safely support the vehicle.
  3. Remove the wheels.
  4. Insert a small prybar through the caliper opening and pry the caliper (using the outboard brake pad) to bottom the piston in the caliper bore. NOTE: This will back the brake pads off of the rotor surface to facilitate the removal and installation of the caliper assembly.
  5. Pry the caliper support spring out of the caliper.
  6. Remove both caliper slide pin bushing caps and slide pins.
  7. Lift the caliper from the anchor.
  8. Using a piece of mechanics wire, support the caliper so there is not tension on the brake hose.
  9. Remove the brake pads from the caliper. Fig. 3: Installing the inward brake pad on the rear caliper piston - 1999-01 Grand Cherokee 93026g95.gif
    To install:
  10. Position the brake pads onto the caliper.
  11. Position the caliper into place on the anchor.
  12. Coat the caliper slide pins with silicone grease and torque them to 21-30 ft. lbs. (29-41 Nm). Install the slide pin bushing caps.
  13. Install the caliper support spring in the top of the caliper under the anchor; then, install the other end into the lower caliper hole. NOTE: Hold the spring in the caliper hole with your thumb while prying the spring end out and under the anchor.
  14. Fill the master cylinder with fluid and bleed the brake system.
  15. Before driving the vehicle, pump the brakes several times to seat the pads.
  16. Install the wheels.

Sep 30, 2010 | 2000 Jeep Grand Cherokee

1 Answer

How to change front discs on vw polo


click on this link directlyhttp://www.aepdirect.com/?option=shop&&page=shop.product_details&category_id=5371&product_id=4051
Caliper With Guide Pins Disconnect the negative battery cable from the battery. Remove the wheel. Using an open wrench hold the lower guide pin. Remove the bolt that secures the caliper.
Pivot the caliper up and then suspend it from the frame using mechanic's wire. To remove the pads, slide the pads straight out.
Pivot the caliper up and then suspend it from the frame using mechanic's wire. To remove the pads, slide the pads straight out.
Clean the old bolt and apply thread locking compound. If the old bolt can not be used install a new bolt. Hold the guide pin using a back-up wrench when tightening the bolt. Using a torque wrench torque the bolt to 26-ft. lbs. Install the wheels. Add oil to the master cylinder reservoir. Reconnect the negative battery cable to the battery.
Caliper With Sleeves and Bushings Disconnect the negative battery cable from the battery. Remove the wheel. Remove the bolt that secures the caliper to the carrier.
Push the caliper up and pivot the caliper bottom out of the carrier. Remove the pads and the anti-rattle springs.
Install the new pads by putting the anti-squeal pads onto the caliper and then sliding the new pads onto the carrier. Put the caliper top back into place. Remove the mechanics wire and push the caliper up so that it pivots back into place and the bottom.
Clean the caliper mounting bolts. Install the caliper mounting bolts and using a torque wrench, torque the bolts to 18 foot/pounds. Install the wheel. Add oil to the master cylinder reservoir. Reconnect the negative battery cable to the battery.
This will help. Thanks please keep updated.please do rate the solution positively .thank you for using fixya

Feb 28, 2010 | Volkswagen GT Cars & Trucks

1 Answer

How to replace the front brake pads


    Calipers With Guide Pins
  1. Step 1 Disconnect the negative battery cable from the battery. Remove the wheel. Using an open wrench hold the lower guide pin. Remove the bolt that secures the caliper.
  2. Step 2 Pivot the caliper up and then suspend it from the frame using mechanic's wire. To remove the pads, slide the pads straight out.
  3. Step 3 Using a C-clamp, compress the caliper piston into the bore. Insert the new pads by removing the mechanics wire and pivoting the caliper back into it's place.
  4. Step 4 Clean the old bolt and apply thread locking compound. If the old bolt can not be used install a new bolt. Hold the guide pin using a back-up wrench when tightening the bolt. Using a torque wrench, torque the bolt to 26 foot/pounds. Install the wheels. Add oil to the master cylinder reservoir. Reconnect the negative battery cable to the battery.
    Calipers With Sleeves and Bushings
  5. Step 1 Disconnect the negative battery cable from the battery. Remove the wheel. Remove the bolt that secures the caliper to the carrier.
  6. Step 2 Push the caliper up and pivot the caliper bottom out of the carrier. Remove the pads and the anti-rattle springs.
  7. Step 3 Install the new pads by putting the anti-squeal pads onto the caliper and then sliding the new pads onto the carrier. Put the caliper top back into place. Remove the mechanics wire and push the caliper up so that it pivots back into place and the bottom.
  8. Step 4 Clean the caliper mounting bolts. Install the caliper mounting bolts and using a torque wrench, torque the bolts to 18 foot/pounds. Install the wheel. Add oil to the master cylinder reservoir. Reconnect the negative battery cable to the battery.

Jul 09, 2009 | 2006 Volkswagen Jetta

1 Answer

How do I get the caliper off to change the back brake shoes


hi remove the lower bolt the upper is not a bolt it is a pin raise the caliper up passed the brake pads and slide the caliper in towards the car the caliper should slide off the pin

Jun 13, 2009 | 1991 Buick Riviera

3 Answers

2004 mazda6 rear brake problem


Have you check to make sure the parking brake is adjusted properly?

May 19, 2009 | 2004 Mazda 6

1 Answer

REAR BRAKE REPLACEMENT


ase mechanic:

those calipers in the rear have slots on the piston right. that means you have to turn the pistons in clockwise. sometimes a pair of needle nose pliers put in the slots and turn will work, otherwise there is a rear caliper brake tool to turn those pistons in.

Jan 29, 2009 | 1996 Pontiac Grand Prix

Not finding what you are looking for?
2003 Ford F350 Super Duty DRW SuperCab Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5520 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...