Question about Ford Crown Victoria
DPF EGR sensor upstream hose off or plugged.
Posted on Aug 25, 2010
Testimonial: "The sensor was melted and the hose had nothing to connect to. replaced and resolved. later found out the egr had melted due to excessive heat from the back of the engine where a gasket was leaking. "
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Mar 14, 2015 | Cars & Trucks
Aug 15, 2014 | 1994 Ford Crown Victoria
When the service engine soon light (Also called the check engine light) is turned on this is to alert you to the fact that Powertrain Control Module (computer) has detected a failure somewhere in the systems it controls you may not feel any difference in the way the engine runs, this can be the transmission or the engine or emission system, there are fault codes set in the modules memory for these faults. What needs to happen now is to have the powertrain control module scanned with a special tool called an OBD2 electronic engine control scanner or a OBD2 code reader. Once the code(s) are read then you must perform the diagnostics for each code and make the appropriate repairs based on the findings of the diagnosis that was performed, this is called doing "Pinpoint" testing.
Jul 27, 2012 | 1994 Ford Crown Victoria
Oct 19, 2011 | 1998 Ford Crown Victoria
Feb 20, 2010 | 1996 Ford Crown Victoria
Oct 08, 2009 | 1998 Ford Expedition
393 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: