Question about 2001 GMC Sierra 1500HD

1 Answer

When I apply the brakes on my 2001 GMC Sierra I get chattering feeling. This happens after I have been driving for awhile and I step on the brakes gradually. Thanks

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,793 Answers

Warped rotors.replace asap.this is a normal wear item.

Posted on Aug 25, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Truck shimmies when brakes applied


Check your brake rotors,are they worn even and no worn marks.When replacing,do both.

Jan 17, 2013 | 2003 GMC Sierra 1500

Tip

How to TEST A TORQUE CONVERTER ON A Automatic Transmission


Symptom : chattering or vibration while idling, and in Park.
Transmission sluggish upon Accelaration..

Step 1: chock Block all your wheels, and put your Auto emergency brake on (applied).

Step 2: You step on your gas pedal with engine in Drive, Full throttle. do not hold your regular brake pedal...Hold gas pedal down for 2 seconds your car will try to move. All wheels must not slip.

Step 3: watch your rpm gauge, your stall should be between 2400-2800 rpm depending on specification of manufacturer..
a low reading isbad stator assembly,
a high reading is a slipping one way clutch..

on Jul 10, 2010 | GMC Blazer Cars & Trucks

1 Answer

I have a 1997 GMC Sierra 1500, and it had drivers side from pads locking up and heating. I changed the calipers , rotor and bearings. I took it for a test drive and its the same problem. I can feel a...


You need to replace the rubber hose going to the brake caliper from the metal line. The inside of the hose is breaking down inside keeping the caliper from releasing. Hope this helps please leave comment.

Feb 25, 2011 | 1997 GMC Sierra

1 Answer

Front brake pads rattle on a 2001 GMC Sierra 1500HD


Is it new hardware?....older pre used hardware should be replaced....also, check the dust shields behind the rotors....could be rusted loose....happened to mine

Feb 15, 2010 | 2001 GMC Sierra 1500HD

1 Answer

My new brakes squeek when i aply them


Unfortunately, this is characteristic of todays metallic and semi metallic pads, particularly if they become glazed. This condition can however be lessened or eliminated by applying a brake silicone lubricant to the back side of the pads, between the pad and the caliper. This will reduce "brake chatter", that is associated with disc brakes. Good Luck! I hope you find this to be very helpful!

Feb 05, 2010 | 2007 GMC Sierra 1500

1 Answer

Front end chatter when applying brakes


Bent disks or rotors. Who does the brake work?

May 24, 2009 | 1995 Jeep Grand Cherokee

1 Answer

PLease Help Brake system


sounds like the abs needs servicing

May 16, 2009 | 2001 GMC Sierra 2500HD

2 Answers

Custom Wheels


I would check with the service manager at the dealer, they may have idea as to what is the cause.

Dec 12, 2008 | 2008 GMC Sierra 1500 2WD

1 Answer

2002 gmc 2500hd 4wd abs problems


the problem is most likely a wheel speed sensor at one of the front wheels. retrieving a code in the abs system could pinpoint which wheel it is. i believe the wheel speed sensor is part of the bolt on front wheel bearing assy. if you plan on doing this yourself and are mechanically inclined. you will need an a/c volt meter to check sensors. let me know if i can assist further.

Dec 04, 2008 | 2003 GMC Sierra 2500HD

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...