Question about 1994 Chevrolet Cargo

1 Answer

Where is number 1in the firing order on a 1994 Chevy G30 van distributor cap?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 6,674 Answers

Standing/facing, at crankshaft end of engine.
5.0L,5.7L, and 7.4L are all the right front terminal, and #1 cylinder is right front as well. Firing order 1-8-4-3-6-5-7-2. Distributor rotates clockwise. That makes # 8 to the left (front) of cap beside # 1.
4.3L engine, # 1 cylinder same place Rt.Frt head, and terminal on cap should be center at front of cap when facing from crankshaft end.

Posted on Aug 25, 2010

  • 1 more comment 
  • Mike Butler
    Mike Butler Aug 25, 2010

    This might be better.

  • Mike Butler
    Mike Butler Aug 25, 2010

    This may help as well.

  • visionsinc Aug 27, 2010

    This was very helpful. It fixed some of the problem but the engine is still missing a bit. Just want to check. The distributor has a rectangular protrusion on the side are 5

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Firing order diagram 1994 chevy 454


Here is the diagram. The white circle in the distributor cap is number one plug wire location, rotoation is clockwise

emissionwiz_14.gif

Dec 10, 2010 | 1994 Chevrolet C/K 3500

1 Answer

I just changed the plugs and wires on a 94 Chevy lumina van.after doing so it didn't idle right and skips. I thought it was maybe the spark plug wires but I can't find the order for this van. It has the...


Here is the firing order for the 1994 Chevrolet Lumina APV Van with a 3.1 Liter engine with a distributor, and the 3.8 liter engine had the coil packs, and let me know if you need any help to understand this diagram, or if you require any further assistance.


5b212ce.jpg

Oct 19, 2010 | 1994 Chevrolet Lumina APV

1 Answer

Need firing order and distributor order for 1995 chevy astro van 4.3 liter vortec


1-6-5-4-3-2
number 1 is the front Cyl on drivers side.
then it is #3 #5
Passenger side is #2 #4 #6
#1 on distributor cap is the front side of cap next
to the hold down screw clockwise side of the screw.
Firing order goes clockwise looking down on the distribuater.

Sep 12, 2010 | Chevrolet Astro Cars & Trucks

2 Answers

I took of*** my spark plug wires working on my small block 350 pickup and I don't remember the the firing order to put the new wires back on. Is there a diagram anywhere or is it even that difficult to...


Next time number each lead before you remove it and no. the dissy cap as well

The firing order, which should be cast into the intake manifold, for the chevy small block V8 is 1-8-4-3-6-5-7-2. The firing order is the numerical sequence in which the spark plugs are fired. The insertion position of each spark plug wire around the circumference of the distributor cap can be found according to a clock face. The insertion sequence determines the firing order. The firing order is followed clockwise around the distributor cap starting from the 6:30 position with the 6:30 position being the number one cylinder spark plug wire.
On classic chevy small block engines that use ignition breaker points instead of electronic ignitions, the number one cylinder is the one immediately clockwise of the small metal sash cover on the distributor cap. The firing order starts here. There is no sash cover on the distributor cap for GM HEI electronic ignitions, and the firing order is the same, but starting at the 5:30 position.
The firing order makes sense if you know how the cylinders are numbered. The number one cylinder is the front most on the drivers side and 2 being the front most on the passenger side. From front to back, the cylinders are odd numbered on the drivers side, and even numbered on the passenger side.
See the diagram; Click to open a printable larger image in a new window. The firing order starts with the number one cylinder. We would connect the number one spark plug wire to the distributor cap terminal in the 6:30 position. distributor.pngSince the next cylinder in the firing order is 8 (passenger side rear), we connect the number 8 spark plug wire to the next distributor cap terminal (approximately 7:30 position) in the clockwise direction from number one. You need to be sure you continue the firing order in the clockwise direction around the chevy small block distributor cap from the last installed spark plug wire. Setting the rest of the firing order is just a matter of repetition. Be sure to count the spark plugs from front to back on each side of the motor to identify the correct cylinder number in the firing order.

Jun 21, 2010 | Cars & Trucks

1 Answer

What is the firing order for a 1994 chevy s10 with a 4m3 vortec and which direction does the distibutor turn


1 6 5 4 3 2 It turns clockwise. if you have the normal distributor cap number one is at 5 o'clock. if you have the flat (edi) distributor the firing order is the same but number one is in the middle of the driver side. The pistons are numbered, #1 front driver, #2 front passenger 3 is behind 1 5 is behind 3. Odd on the driver even on the passenger

Apr 27, 2010 | 1994 Chevrolet S-10

3 Answers

I need a fire timing order for a chevy astro van v6


THE FIRING ORDER IS AS FOLLOWS : 1-6-5-4-3-2.
CYLINDER NUMBERS (front-to-rear) :
LEFT (driver side) 1-3-5
RIGHT (passenger side) 2-4-6

To set ignition timing, ensure that engine is at operating temperature, (190 degrees or above), bypass EST (electronic spark timing) by unplugging the single tan wire with a black stripe from the distributor. Ignition timing should be set at 0 degrees or TDC (top dead center). If not, loosen distributor hold down bolt and adjust, then retighten.

Mar 05, 2010 | 1993 Chevrolet Astro

1 Answer

How to correctly set the timing on a 1994 chevy van 5.7


i'm the chevy guy. are you talkin distributor timing or timing chain timing?

Dec 14, 2008 | 1994 Chevrolet Sportvan G30

3 Answers

Distributor cap firing order 1993 chevy cheyenne truck v6


Firing order is 1-6-5-4-3-2 cyls. # 1-3-5 on drivers side front to back and cyls. # 2-4-6 passenger side front to back.

Nov 28, 2008 | 1989 Chevrolet C1500

1 Answer

Ignition sequence on a 1994 chevy astro van 4.3 v6


Firing order on a six cylinder:

1-6-5-4-3-2

Hope it helps

Mike


Jun 06, 2008 | 1994 Chevrolet Astro

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

649 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77194 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...