Question about 1997 GMC Sierra

1 Answer

Inside latch won't open door but outside works fine

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,793 Answers

Inside latch has a wire that is connected to the door opener and the plastic clip that holds it in place has brocken,you need to take the interior door panel off to get to it.

Posted on Aug 25, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How I can manualy unlock rear door on 2008 dodge nitro?


I see you are ale to see the cables and rods how and when they operate. When you to open the latch from the outside and the inside. Are you able to see if they move the mechanism up or down as you try to open the door working the latch outside and the inside door handle. Sounds like your door latch broke internally, the only thing I was able to do was from the inside with somebody holding the outside latch up to open. Kick it hard in the area where the door latch is. Lay on the sit and kick it hard while the outside individual lifts the latch and pulls. It should pop open. Good luck.

Jan 13, 2015 | 2008 Dodge Nitro 3.7

1 Answer

Child door lock stuck


If the little lever on the door latch doesn't work, you will need a new door latch.

Aug 01, 2014 | Subaru Legacy Cars & Trucks

1 Answer

The driver door inside latch won't open the door on my daewoo lanos 00


The hadle may have broke but more likely the clip holding the linkage to the leaver has come off. you will need to pull door panel off

Apr 19, 2013 | 2001 Daewoo Lanos

2 Answers

2003 Honda pilot right rear door lock won't open from the inside only


It can be faulty switch or safety lock enabled.Go through this direct link and follow the step by step process to get the door open from inside:

Click the ;link:--

http://www.howtorepairguide.com/2013/02/honda-pilot-rear-door-lock-wont-open.html

---------

This will help.

Thanks.

Feb 15, 2013 | 2003 Honda Pilot

1 Answer

Door won't open from inside '98 silverado


your door rod to your latch must have popped off your inside door latch. take your door pannel off and the door rood will be unhooked

Dec 12, 2012 | 1998 Chevrolet Chevrolet silverado

1 Answer

1993 Gmc truck drivers door won't open from inside or outside


Probably the lock in the latch.
You'll have to remove the inside door panel to get to the latch.

Jul 08, 2012 | GMC Cars & Trucks

3 Answers

2006 buick lucerne back doors won't open


My friend just had this problem and he reached in and pulled the inside door handle back as far as it would go, and then let it go, allowing it to 'snap' back. For some reason this fixed it. We have no idea why. By doing this on one door, both rear door locks freed up and the rear locks are now working. Before, both rear locks were stuck and you could not open the doors from the inside nor the outside. Not sure why it works, but maybe it will work for you!

Jun 10, 2011 | 2006 Buick Lucerne

1 Answer

DRIVERS FRONT DOOR CAN'T OPEN FROM IN OR OUTSIDE


There is a rod inside the door that connects the inside and outside door handles to the latch mechanism, if it gets bent or broke it won't activate the latch. The inside door panel will have to be removed and parts of the mechanism also to reinstall. Would recommend maybe taking somewhere unless it's an old BWM.

May 03, 2011 | BMW X5 Series Cars & Trucks

Not finding what you are looking for?
1997 GMC Sierra Logo

Related Topics:

88 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...