Question about 2005 Buick LaCrosse

1 Answer

Knock in stering when turning the wheels from side to side

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 157 Answers

Possible Tie rod ends, inner or outters cause that type of noise, loose steering mount bolts in the undercarge, binding steering shaft and or binding movement of the half shaft .

Ball joints as well can make that noise, need to isolate the problem. Turn the vehicle off with the key in the ON position have someone move the wheel slightly side to side while u have your hand at the outter tie rod ends, then u will want to raise the front end up , and wiggle the wheel side to side to see if the inner tie rod ends have play or making the noise,.

Good Luck

Posted on Aug 24, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ingen switch jammed


try turning stering wheel side to side hard while turning key. sometimes the pressure is to strong on the stering lock.

Mar 14, 2013 | 2004 Ford Mustang

1 Answer

My ignition switch on my 2003 civic .is not working. i can put the key in but it wont turn forward or backwards. what should i do?


Have you tried to turn the steering wheel side-to-side, while turning the key?
The steering wheel may be very hard to turn, but moving it just a little may free-up the key
Sometimes parking against a curb, or turning off the car while the steering is turned all the way to one side, will cause the stering wheel lock to actually lock the key cylinder from turning.

Apr 08, 2011 | 2003 Honda Civic

1 Answer

The hourn keeps going off when ever i turn the stering wheel


you have to remove the steering wheel and you will see a knob either it is bent or touching the sides fix it

Jan 29, 2011 | Renault Sport Cars & Trucks

1 Answer

Noise in steering column, knocking sound, not only when turning wheel


sounds like eithor the colapsable shaft booshing is bad or the stering has tilt and the u joint is cooked also try pulling pushing and generlay shaking the wheel if it moves it is bad and time to rebuild it or replace it with one from salvage just have lock smith change lock or look on yahoo for tips on how to remove old lock and install new
eithor way columb from dealer 1200 or salvage is 200

Jan 10, 2010 | 2004 Chevrolet Silverado

1 Answer

My stering wheel is locked and I cannot turn the key.


Turn and hold sterring wheel to release pressure and then turn key.

Dec 28, 2009 | 2001 Chrysler Town & Country

1 Answer

My pointic g6 2003 the tiar does not turn when i turn the stering wheel when the car on parking but on drive the wheel turns according to the stering wheel could u help me please


either power steering components are bad or did you check to see if you have a loose or any belt on the car..pump or rack could be not working properly...is there fluid in the resevoir...

Oct 11, 2009 | 2003 Pontiac G6

2 Answers

Lock steering wheel...Key won't turn in the ignition


Make sure to push the brake firmly with you foot. I do this all the time.

Apr 14, 2009 | 2000 Cadillac Escalade

1 Answer

SHAKING AND KNOCKING NOISE


it could be tht the exhaust pipe is loose and therefor makes shaking and kinda banging noise. hope i helped! ;-)

Jul 26, 2008 | 1994 Jeep Grand Cherokee

2 Answers

My 94 jeep grand cherokee


could be hydraulic tappet malfunction. give more info. I E engine type etc.

Jun 17, 2008 | 1994 Jeep Grand Cherokee

1 Answer

SHAKING AND KNOCKING NOISE


This is the problem with suspensions problem of the car or major problem with the engine in the car get it check by the dealer as this may factory defective part install as this car is still under warranty.........................................................

Jun 05, 2008 | 2007 Chevrolet Uplander LS Minivan

Not finding what you are looking for?
2005 Buick LaCrosse Logo

Related Topics:

281 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...