Question about 1996 Chevrolet Blazer

1 Answer

1996 chevy blazer 4wd break petal goes all the way to the floor breaks r good new master cylinder blead all braks 10 times any sugesstins? help!!!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 157 Answers

I know there is ABS in that vehicle, you might still have air in the ABS unit, you will need to get a manual that shows you the correct procedure to bleed the brakes. Master installed u need to start the bleed on the bench, then move to the ABS unit then to the individual calipers and/or wheel cylinders if equipped. I think there is a certain way to do it to avoid incorrect bleeding.

But i have also seen bad master cylinders brand new in the box.

Good Luck.

Posted on Aug 24, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Abs


sounds like the anti lock pump is gloing out

Oct 27, 2012 | 1998 Chevrolet Blazer

1 Answer

I have a 96 ford explorer xlt 4wd with ABS. When I bought it it had a broken back break line. I replaced the line blead the breaks and the breaks are spongy. I googled the issuse and found out it could be...


Check your parking brake. if it goes down to the floor or does not hold, then your back brakes needs adjusted. bad master cylinders bleed off slowly to the floor while pushing on the brake pedal. If you need assistance on adjusting let me know.
Randy

Nov 09, 2010 | 1996 Ford Explorer

1 Answer

Got a 92 blazer that the brake pedal goes to the floor and is spongy, but also fades/sinks when holding it. I've bled all 4 wheels twice, 1st time bled old out until new came through, felt spongy and goes...


blead from the furthest point forward... so , if your master is on the firewall on the drivers side.. rear right , rear left , right front and then left front...

Sep 30, 2010 | Chevrolet Blazer Cars & Trucks

3 Answers

No brakes push pedal to floor


leaky rear break cylinder or master cylinder

Oct 02, 2009 | 2001 Chevrolet Blazer

1 Answer

What causes the brakes to go out i checked the fluid and it's good my brakes are not working at all


it might be your master cylinder..."my brakes go out" is not the best description. if the pedal feels very soft, or goes all the way to the floor, then its probably the master cylinder. also, if you just had break work done, then its possible that not all the air go blead out of the system. if the breaks are hard to push, then your break booster may have a leak..

cheers

Jul 08, 2009 | 1993 Ford Ranger SuperCab

1 Answer

1999 Chevy S10 Blazer 4x4. Replacing rear pad's,& Bleeding Breaks


have one person in the blazer pumping the brake pedal and then hold to the floor, crack the bleeder then tighten, release pedal, repeat till all air is out one side at a time, if this does not work then your ABS unit is bad witch if u follow your lines from your master cylinder u will find a black box with a motor on it, or the master cylinder itself is bad, it also can cause u to have no pedal, replace the master cylinder first, most likely cheaper.

Mar 11, 2009 | 1997 Chevrolet S-10 Pickup

1 Answer

BRAKES


if you have no leak our master cylinder is defective good luck pierre

Sep 05, 2008 | 1999 Chevrolet Malibu

1 Answer

No brake!


also check the brake booster usually when it goes bad the pedal goes to the floor causing no brakes.....try replacing that.....also a vacuum leak could cause that....are you loosing brake fluid at all besides when you bleed the brakes? let me know

Jul 05, 2008 | 1994 Chevrolet S-10 Blazer

Not finding what you are looking for?
1996 Chevrolet Blazer Logo

Related Topics:

202 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...