Question about Chevrolet Blazer

1 Answer

Will be traveling along fine and then just goes into limp mode for no reason, fuel gauge goes crazy,pull over swtch off and restart all good until next time, can happen two or three times a day.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Sound close to what my truck had. Mine is a 97 silverado. My problem was in the ignition switch. When it would get hot the fuel pump would work. I opened the switch and sanded all the prongs that made contact when you turn the key and it hasnt done that at all. And its been over a year. Just be very careful cause the ignition has about 8 small springs if you go that far to look for the problem. Let me know what you find out. Thanks

Posted on Aug 24, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Looking too buy peugeot 807 deisel 2.2 hdi been told it goes in limp mode but it still drives and willeventually get to 70 or 90


When a transmission is put into limp mode by the pcm/tcm, it's for a reason. The limp mode is to limit further damage until the problem can be diagnosed and properly repaired. Keep driving it and it will require a new transmission.

Jan 30, 2017 | Peugeot Cars & Trucks

1 Answer

04 pt cruiser auto. start engine put in gear and drive shifts fine. eng light is on from time of start.


Visit the on-line store, know as reliable-store, they have the repair manuals. I'm sure you will get the solution of your problem.
Best Manuals

Jan 06, 2017 | Chrysler PT Cruiser Cars & Trucks

1 Answer

My Toyota cruiser code p004 has come up, can u tell me what this code is for?


diesel turbo
re check the fuel pump pressure and filter
p004
Fuel Volume Regulator Control Circuit High

Read more at: http://www.obd-codes.com/p0004
Copyright OBD-Codes.com
http://www.obd-codes.com/p0004

Jul 05, 2016 | 2007 Toyota Land Cruiser

1 Answer

97 expedition has intermitting no start. Thought it was fuel pump so replace it. It will start but as soon as touch gas it spits and sputters then dies When it does start it may run fine ,plz help.


Monitor the fuel pressure with a test gauge, if that is OK then try disconnecting the MAF sensor and see if it will run better (the computer goes into limp mode), if it does the MAF is likely defective. Don't replace any parts until a certified technician verifies the issue, you have wasted enough money and time already right?

May 20, 2016 | Cars & Trucks

1 Answer

Gl on limp mode


have the fault codes read to check for reason it is in limp mode. Fix any faults found and use the scanner to reset the ECM program as the dead battery may have corrupted the program

Dec 25, 2014 | AC Cars & Trucks

1 Answer

While driving along my 2005 mercedes e320cdi goes into a limp mode and I don't seem to have a turbo. Once I stop it and turn off the key and let it sit for several minutes it seems to be fine once it is...


Please describe limp mode. wesleygolden@optonline.net Is the transmission effected, or engine performance. how long has the check engine light been on. And do you have starting issues during cold start. Ooh does this model have a ureurea system in it? An addtive to clean the catalytic system which needs to be service once a year...

Dec 11, 2009 | 2005 Mercedes-Benz Mercedes Benz E320 Cdi

1 Answer

Trans program comes on every once in a while. it will go a week just fine then like out of nowhere it goes into limp mode. restart it and drives fine again, for like an hour then again ''limp mode''. leave...


tou will have to get it scaned it could be over heating have a bad sensor or need to be flush either way dont keep driving it or you WILL BURN UP THE TRANS

Nov 23, 2009 | BMW 525 Cars & Trucks

1 Answer

Landcruiser GXL 2002 Turbo Diesel - Fuel ? problem


I can only relate this problem to those similar to Ford F150's,,,on the fords it would be bad grounds from the battery to the frame,and engine,,and from the engine to the Firewall.
This would play havoc with the ECM especially when it was damp.
So i can only suggest the obvious to me at least.
Good luck to you.

Jan 19, 2009 | 2002 Toyota Land Cruiser

1 Answer

1996 dodge avenger when cold, the transmission go in limp mode


Is the vehicle's Check Engine Light on? It should briefly light up when you turn the key on (before you start the engine) to show that the light is working correctly. Based on what I've read I believe you should have one or more trouble codes. A place like AutoZone will read the trouble codes for you for free, and you can look them up here - http://www.engine-light-help.com/generic-check-engine-light-codes.html

Dec 12, 2008 | 1998 Dodge Avenger

1 Answer

Saab 2.2tid car loses all power when warm, rev counter goes to zero


Check fuel feed is ok and fuel pump pressure also check cold start injector could be running on this til warm.

Sep 16, 2008 | 1999 Saab 9-5

Not finding what you are looking for?

Open Questions:

Cars & Trucks Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...