Question about 2004 Mitsubishi Lancer

1 Answer

Why would my right passenger front wheel vibrate and shake when hitting a bump?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,702 Answers

First check the wheel bearing on that side if its not floppy check the ball joints for wear try lifting them any life in them shows there worn out,,,then check the shocker bounce the wing a fuw times and let it go if it keeps bouncing up and down more than a fuw times (2) the shocker is worn out,,,the last thing to test is the stearing arm from the stearing box/rack get hold of the wheel at 3 and 9 o clock push and pull on it,,if its easy to turn and floppy look for any bits in the stearing that flop about

Posted on Aug 24, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Front passenger wheel


Have a competent mechanic determine what is wrong.

Mar 14, 2014 | 1993 Toyota MR2

2 Answers

My 1989 Chevey Celebrity started shaking the other day the front part of the car, not like the front end is messed up but it shakes.


Could be a wheel, tire, or axle shaft.
You could rotate the tires front to back and see if the vibration moves.
If it does the problem is one of the tires or wheels.
If it stays in the front, its probably one of the axle shafts. It could also be a hub bearing or something loose in the suspension. But a loose suspension part would normally show up when you hit a bump rather than on a smooth road.

Dec 25, 2012 | 1989 Chevrolet Celebrity

2 Answers

I have a 1993 Jeep Grand Cherokee Laredo. There is a "violent" vibration that occurs only when you are going 40-60 MPH and you hit a bump or pot hole on the highway. The front end begins to...


Vibration from about 40-60 mph is usually attributed to wheel balancing, but the onset when you hit a bump seems to indicate play in the steering linkages (tie rods etc) or suspension members and stabiliser bar rubbers but you had that all checked out, that brings us back to the wheel balancing.

Mar 17, 2011 | 1993 Jeep Grand Cherokee

2 Answers

Front tire on passenger side shakes when i hit a bump at 20mph or higher.


perhaps a leaked out shock absorber....you might see an oily film on the lower half of the shock.....simplest place to start. If not that, then the front end should be checked for worn or broken component

Feb 17, 2011 | 1997 Jeep Grand Cherokee

1 Answer

Front wheels shake when I hit a bump in road


Pitman arm and tie rod ends and bail joints.The three main causes of front end shake after hitting a bump.There's so much slop that when you hit a bump it shakes violently from one end of the slop to the other.Very dangerous!You need to get this fixed now!
Get someone to turn the steering wheel while holding onto a front wheel and just watch for stuff that moves.Turn left and right and you'll see what's the worst for wear.The connections at the steering box arm(Pitman) and at the wheels(Tie rods) will be what moves the worst.Hope this helps?Autozone has a kit for the pitman for $100,probably be $600 at a shop.

Jan 11, 2010 | 1994 Jeep Grand Cherokee

1 Answer

Shaking on the highway


Check your wheel bearings and at the same time check your brake pads.

Jun 13, 2009 | 1999 Dodge Ram

1 Answer

The front end and steering wheel shakes when i hit a hole or bump


This usually indicates a problem with the suspension components. Check for play in front end suspension, 1st thing I would check would be the steering damper, it's often overlooked, and could be the cause. If that checks out ok, jack up and check for play in wheels, which could be caused by worn ball joints, tie rod ends, wheel bearings. A lot of possibilities, generally play in any components can trigger the shaking you're experiencing when hitting a pot hole or bump. Good luck!

May 09, 2009 | 1988 Ford F 150

1 Answer

Problem with shaking tires


replace the idler arm that connects the steering linkage to the frame on the passengers side,heavy duty part is about$90.00

May 08, 2009 | 2005 Chevrolet Colorado

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7688 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...