Question about 1997 Chevrolet Camaro

1 Answer

Do u have a diagram on how 2 installa fuel pump on a 1997 or 1998 camerao

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 409 Answers

You have to remove the fuel tank to get to the pump. This will require a special tool to unhook the fuel lines. Some parts stores will loan/rent these tools. Very simple job if you can get the car high enough off the ground to clear the fuel tank. This job is best done on an empty tank, it is much lighter with no gas in it. Put a jack under the tank, remove the straps, filler hose and fuel lines and let the tank down. Use a hammer and a BRASS or ALUMINUM punch(read non sparking) to remove the locking ring, lift the old pump out and install the new one.

Posted on Aug 24, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Please can you give me the diagram of 4HF1 electrical fuel rotary pump timing?


4HF1.mp4 - YouTube

? 2:31
https://www.youtube.com/watch?v=Mj30ueP-kRI
Mar 14, 2012 - Uploaded by hacpatb20
1:52. Installing a Diesel Injection Pump & Setting the Timing - Duration: 3:28. TiredIronVideos 468,150 views ...

diagram of 4HF1 electrical fuel rotary pump timing Google Search

Apr 19, 2017 | Cars & Trucks

1 Answer

Needing color coded wiring schematic for junction of fuel pump and fuel level float inside gas tank


They are 2 ways to get this. An internet search using your year make and model car with the term fuel pump wiring or wiring diagram usually pulls up a collage of good diagrams. Or the autozone site has a help site at the bottom of its help page, There is a free part and a pay part, but free info will supply diagrams.

Aug 18, 2015 | 2000 Ford Escort

1 Answer

No power in my fuel pump fuel relay for fuel pump


Get yourself a wiring diagram & study it & then
start testing the fuel circuit

How would you know whether you had power or
now power, to anything, working blindly?

You listen to what your told.
I wouldn't-- you may have changed a good fuel pump

I NEVER walk to any vehicle without a wiring diagram

How would you learn the system & the circuits, without one?

Oct 16, 2014 | Cars & Trucks

1 Answer

Prob with 2000 C3500 5.7L fuel pumps.


I don't know if this will come thru or not. You may need to get a shop manual to get all of the diagrams to troubleshoot the circuits.
The diagram I found shows two tanks, and each one has a relay for the pump. The relays and gauge are controlled by the PCM and both pumps are grounded together. This may or may not match your truck.
0996b43f80243417.gif

Aug 21, 2012 | 2000 Chevrolet 3500

3 Answers

Need color code on new connector


Just did my fuel pump on the 2001 isuzu rodeo. Well here is what you need to do about the different wire colors. First disconnect your negative battery. Drop the fuel tank and replace pump. Remember to have a splice kit in hand. Ok now here is how you connect the different colored wires. Black goes with black. Gray goes with black and orange wire. Purple goes wit blue and yellow. And the last wires goes together. I hope this helps.

Aug 12, 2012 | 2001 Isuzu Rodeo

1 Answer

HOW MUCH WOULD IT COST TO HAVE A FUEL PUMP INSTALED


George,
No simple diagram for changing the fuel pump. It is located inside the gas tank. The gas tank needs to be removed to change the pump. The pump is part of an assembly which consists of the pump, fuel gauge sender and pick up. You also need to change the fuel filter when you change the pump. It should take a professional mechanic about 3 hours to drain the fuel out of the tank, remove the tank, change the pump and fuel filter. Multiple the mechanic's time by whatever the repair shop charges per hour for labor. There are several different pump assemblies for the vehicle. Price depends on whether it's 2 or 4 doors and 2 or 4 wheel drive. Best guess is about $600 total.

Nov 26, 2011 | 1998 Ford Explorer

1 Answer

I need a wiring diagram for a 1998 Chevy Blazer fuel pump


The fuel pump assembly consists of fuel pump relay,fuel sensor,the fuel pump controlling fuse,its ECM B fuse. The fuel pump and oil pressure switch. ----------- For its wiring diagram, click the link below and refer the diagram:--- http://technoanswers.blogspot.com/2011/10/fuel-pump-wiring-diagram-for-1998-chevy.html ----------- This should help.Thanks.Helpmech.

Oct 06, 2011 | 1998 Chevrolet Blazer

1 Answer

Can you get to the fuel pump and filter under the back seat on a 2004 kia optima 4cyl.


Please let me know if this washelpful and if it solved the problem! Also if the information provided washelpful, please click on the appropriate thumbs to make us aware that theproblem has been corrected or that the information provided helped you with theproblem.. Thank you and Good Luck.
Raisethe trunk lid and access the fuel tank service cover in the upperright-hand side of the trunk ledge. Remove the cover and unplug theelectrical connector that powers the fuel pump. Start the carand let it run until the engine dies. This will remove thehigh-pressure fuel that is in the line so fuel will not spray when theline is disconnected. Test for voltage by probing the positive andnegative fuel pump wires with a test-light. Make sure there is avoltage signal to the pump. If there is, the pump is defective. Turnthe key off when the car stalls and replace the pump.
Disconnectthe fuel feed line with the quick disconnect feature that is part ofthe fuel line fitting. Squeeze the two tangs of the connector and pullthe hose off. Remove the fuel vapor hose that goes to the vaporcanister by loosening the clamp and pulling the hose off the vaporport. Remove the retainer ring that holds the pump assembly in placeusing a small shop hammer and screwdriver. Lightly tap the screwdriveragainst the indents on the retaining ring until it unscrews. (The ringlooks like a large lid that screws to a jar.) Completely loosen thering and remove the pump module by lifting it up and out.
Install a new pump module into the opening. The new module will comecomplete, including a new fuel filter. No parts will need to betransferred from the old pump module. Push the new module into the fueltank and tighten the retaining ring into place. Snap the fuel feed lineinto place, making sure there is a distinctive snap as the line locksin. Install the vapor line and tighten the hose clamp. Do not leavethis line off or fuel vapors will enter the car. Plug the wiringharness in, and replace the pump cover. Start the car.


  • 3 Installa new pump module into the opening. The new module will come complete,including a new fuel filter. No parts will need to be transferred fromthe old pump module. Push the new module into the fuel tank and tightenthe retaining ring into place. Snap the fuel feed line into place,making sure there is a distinctive snap as the line locks in. Installthe vapor line and tighten the hose clamp. Do not leave this line offor fuel vapors will enter the car. Plug the wiring harness in, andreplace the pump cover. Start the car.

  • Read more: How to Replace a Fuel Pump on a 2004 KIA Optima ' eHow.com http://www.ehow.com/how_7338021_replace-pump-2004-kia-optima.html#ixzz1Xa8IJn5n

  • 2 Disconnectthe fuel feed line with the quick disconnect feature that is part ofthe fuel line fitting. Squeeze the two tangs of the connector and pullthe hose off. Remove the fuel vapor hose that goes to the vaporcanister by loosening the clamp and pulling the hose off the vaporport. Remove the retainer ring that holds the pump assembly in placeusing a small shop hammer and screwdriver. Lightly tap the screwdriveragainst the indents on the retaining ring until it unscrews. (The ringlooks like a large lid that screws to a jar.) Completely loosen thering and remove the pump module by lifting it up and out.
  • 3 Installa new pump module into the opening. The new module will come complete,including a new fuel filter. No parts will need to be transferred fromthe old pump module. Push the new module into the fuel tank and tightenthe retaining ring into place. Snap the fuel feed line into place,making sure there is a distinctive snap as the line locks in. Installthe vapor line and tighten the hose clamp. Do not leave this line offor fuel vapors will enter the car. Plug the wiring harness in, andreplace the pump cover. Start the car.

  • Read more: How to Replace a Fuel Pump on a 2004 KIA Optima ' eHow.com http://www.ehow.com/how_7338021_replace-pump-2004-kia-optima.html#ixzz1Xa7yPJ56

    Sep 10, 2011 | 2004 Kia Optima

    Not finding what you are looking for?
    1997 Chevrolet Camaro Logo

    Related Topics:

    122 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Chevrolet Experts

    yadayada
    yadayada

    Level 3 Expert

    76051 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    8265 Answers

    Are you a Chevrolet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...