Question about 2004 Mitsubishi Endeavor

Open Question

C1200 front right wheel invalid signal C1205 front

C1200 front right wheel invalid signal C1205 front right wheel sp sensor malfunction C1206 front right invalid signal C1211 rear right wheel invalid signal C1381 straight g sensor stuck/low gain

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
carputers
  • 255 Answers

SOURCE: the 2 wheels of my car are stuck up. one front

remove wheel and spray wheel hub/axle bearing with PB blaster.

Posted on Oct 02, 2009

Testimonial: "thanks it really worked! sorrry for my late reply but my brother did just exactly what you advised. thanks!"

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2006 PONTIAC TORRENT WON'T START CODE READS COO4O ONLY CODE STILL WON'T START


C0040
Right Front Wheel Speed Sensor Circuit Malfunction
EBCM
DTC C0035-C0051

The wheel speed sensor produces an alternating current signal whose amplitude and frequency vary, depending on the velocity of the wheel. The electronic brake control module (EBCM) uses the frequency of the AC signal to calculate the wheel speed.

This wouldn't have anything to do with not starting ! Won't start how ? When you turn the key to the start position what happens ? Does the starter engage an spin the engine ? This would be a crank no start , now if nothing happens when you turn the key this is a no crank - no start .

Nov 10, 2017 | Pontiac Cars & Trucks

1 Answer

P0501 code?


P0501 - Vehicle Speed Sensor (G22): Implausible Signal Possible Causes
  • Wiring/Connectors from/to Vehicle Speed Sensor (G22) faulty
  • Wiring/Connectors from Transmission Control Module (J217) to Engine Control Module faulty
  • Vehicle Speed Sensor (G22) faulty
  • Malfunctioning Left Front wheel speed sensor (in vehicles that don't use a physical G22 sensor)
Possible Solutions
  • Check Wiring/Connectors from/to Vehicle Speed Sensor (G22)
  • Check Wiring/Connectors from Transmission Control Module (J217) to Engine Control Module
  • Check Vehicle Speed Sensor (G22)
  • Check ABS Brakes for faults and diagnose malfunctioning Left Front wheel speed sensor if applicable

Category:

Mar 10, 2016 | 1996 Audi A4

1 Answer

AWD not working


No 4X4 switch on the instrument panel ?
Automatic Transfer Case
The single speed automatic transfer case system shifts automatically from rear wheel drive to four wheel drive when the transfer case shift control module (TCSCM) senses the difference in rotation speed of the front propeller shaft and the rear propeller shaft . Two vehicle speed sensors, one located at the rear output shaft area of the transfer case, and the other, located at the front output shaft area of the transfer case, send front and rear propeller shaft rotation speed information to the TCSCM.
When the front and rear output shaft rotations remain the same, the TCSCM sends pulse width modulation signals to the encoder/motor to keep the transfer case in rear wheel drive. When the front and rear output shafts rotations are different, the shift control module sends pulse width modulation signals to the encoder/motor to engage the transfer case into four wheel drive.
The system will automatically transfer a percentage of torque to either the front or rear axles as required to stop all wheel slip. When the front and rear output shafts rotations return to the same speed rotation, the shift control module sends pulse width modulation signals to the encoder/motor to position the transfer case back into rear wheel drive.
When the transfer case is engaged into four wheel drive, a lamp indicator on the instrument cluster will light. The automatic transfer case system is completely automated, no transfer case control button switching system is required.

Do you know what DTC'S - diagnostic trouble code's are ?
Auto part stores can't read these , your best bet take it to a qualified repair shop . One that has the knowledge an diagnostic equipment .
DTC C0300 Rear Speed Sensor Malfunction
DTC C0305 Front Speed Sensor Malfunction
DTC C0308 Motor A/B Circuit Low
DTC C0309 Motor A/B Circuit High
DTC C0310 Motor A/B Circuit Open
DTC C0315 Motor Ground Circuit Open
DTC C0374 General System Malfunction
DTC C0376 Front/Rear Shaft Speed Mismatch
DTC C0550 ECU Malfunction
DTC C0611 VIN Information Error
DTC C0895 Device Voltage Malfunction
Without proper factory service an repair info. an diagnostic tools

Jan 08, 2018 | 1998 Oldsmobile Bravada

1 Answer

I have an ABS fault on a Smart Forfour (Fixya did not let me enter this) and I have also had the use of a fault code reader. The car has needed a replacement ABS sensor as the cable was damaged and no...


from what you are explaining , sounds like it is the sensor , as it only comes back when you start driving.
try replacing left with right side and see what code you get , if it is the right side after replacement then you are sure it is the sensor. if not check the wiring on the left hand side

Jul 28, 2011 | Smart fortwo Cars & Trucks

1 Answer

FAULT CODES 32,31,48 IN ABS SYSTEM FZJ80


CODE 32- FRONT LEFT WHEEL SPEED SENSOR SIGNAL MALFUNCTION. CODE 31- FRONT RIGHT WHEEL SPEED SENSOR SIGNAL MALFUNCTION. CODE 48- OPEN OR SHORT CIRCUIT IN VTA2 SIGNAL CIRCUIT OF THE SUB THROTTLE POSITION SENSOR.

Aug 27, 2009 | 1994 Toyota Land Cruiser

1 Answer

My 2003 Hyundai Santa Fe ABS light is staying on but the ABS is not engaged.


Here are all the possible problems which can turn on your ABS light.

C1101 Battery voltage over volt: 18V or more ○ ○ BR - 69
C1102 Battery voltage low volt: 9.5V or less ○ ○ BR - 69
C1200 FL wheel sensor: open or short to ground ○ ○ BR - 66
C1201 - Range/Performance: speed jump or damaged exciter ○ ○ BR - 67
C1202 - No signal: air-gap error or wrong excite ○ ○ BR - 68
C1203 FR wheel sensor: open or short to ground ○ ○ BR - 66
C1204 - Range/Performance: speed jump or damaged exciter ○ ○ BR - 67
C1205 - No signal excite: air-gap error or wrong excite ○ ○ BR - 68
C1206 RL wheel sensor: open or short to ground ○ ○ BR - 66
C1207 - Range/Performance: speed jump or damaged exciter ○ ○ BR - 67
C1208 - No signal excite: air-gap error or wrong excite ○ ○ BR - 68
C1209 RR wheel sensor: open or short to ground ○ ○ BR - 66
C1210 - Range/Performance: speed jump or damaged exciter ○ ○ BR - 67
C1211 No signal: air-gap error or wrong excite ○ ○ BR - 68
C1604 ECU hardware: ECU internal or valve failure ○ ○ BR - 70
C2112 Valve relay: valve relay or fuse failure ○ ○ BR - 70
C2402 Motor-Electrical: open or short to battery, motor relay, fuse or motor lock fail ○ ○ BR - 71
C1503 TCS switch failure δ ○
C1605 CAN Hardware failure δ ○ BR - 71
C1610 CAN Bus off failure δ ○ BR - 71
C1611 EMS Time-out failure δ ○ BR - 71
C1612 TCM Time-out failure δ ○ BR - 71
C1613 TCM Un-matching failure δ ○ BR - 71
C2227 Brake disc overheat δ ○
C1274 G-Sensor signal fail (only 4WD) ○ ○ BR - 72
C1275 G-Sensor open or short to ground (only 4WD) ○ ○ BR - 72
You'll need a scanner which is compatible with Hyundai's ABS system to retrieve any DTC's (Diagnostic Trouble Codes) stored in its computer. Any time the ABS light comes on, there's a DTC stored in its computer - that code will tell you where the problem exists. Then you can go from there.

Jun 03, 2009 | 2003 Hyundai Santa Fe

2 Answers

ABS signal light comes on


it means that you are having a malfunction with the abs system on your brakes....id have that checked immediately by a certified mechanic

Feb 11, 2009 | 2005 Chrysler Pacifica

Not finding what you are looking for?
2004 Mitsubishi Endeavor Logo

Related Topics:

346 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

79077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...