Question about Jeep Cherokee

1 Answer

How to bypass abs systemon a 94 jeep 4 will drive

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Jeep Master
  • 6,982 Answers

If the ABS isn't working the "fail safe" mode is supposed to revert back to regular brakes, but the light on the dash will remain on.
Your other option is to go to a scrapyard and find a vehicle like yours without ABS and map out where the lines are attached at both ends.
You will need the power booster, master cylinder, brass "t" block at the rear differential and proportioning valve from that vehicle, You may be able to re-use some existing brake lines from yours but best to just buy new. When replacing a line you may need several sections. Joining them should be done with solid unions not compression fittings. It is not necessary to exactly follow the original ones as long as you are reasonably close and keep lines off of sharp edges, moving suspension components and exhaust pipes. Before you even begin to do anything on your vehicle be sure the bleed valves are not frozen so when you are finished you will be able to bleed out the system and, have at least a quart of new brake fluid on hand to do that with..

Posted on Aug 24, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I turn off the abs light on a 2004 jeep with 4 wheel drive

You Can't turn off ABS light , ABS light on means tou have a fault with ABS , Needs workshop or Garage DIAGNOSTICS

Mar 15, 2015 | Jeep Cars & Trucks

1 Answer

Why abs and 4wheel lights come on when i start

read the operators guide yet,
seems not.

Aug 12, 2014 | 2010 Jeep Patriot Sport

1 Answer

Bypass ABS lines jeep


does bypass mean defeat.
or purge air.????
what are are you doing , or attempting to do?
1: service
2 : hacks.?

Jan 11, 2014 | 2001 Jeep Grand Cherokee

1 Answer

Can a 98 jeep grand cherokee 4.0l perminant 4+4 run without the front propshaft

The front propshaft on my full time 4 wheel drive 94 Grand Cherokee was vibrating badly years ago so I removed it and my Jeep has driven just fine without it since, no vibrations.Doesn't seem to cause any harm that I know of.

Feb 05, 2011 | 1997 Jeep Grand Cherokee

1 Answer

How do i put my jeep into 4 wheel drive? Sounds dumb i know, but I just got a 94 jeep grand cherokee and dont know hwo to put it in 4 whe3l

near the gearstick you have another one, on which it writes 2, 4 , and low, if you put it in 2 you have only the back wheels powered, if 4 you are on 4wd and on low you have a power gear, that gives you more power on the wheels, by changing the gearbox ratio

Apr 11, 2010 | 1994 Jeep Grand Cherokee

1 Answer

Does the 94 jeep cherokee country have abs,brakes

some do, some don't. If you have a simple master cylinder and don't have a bunch of abs components under the hood back near the passenger side firewall, then you have a "normal" system.

Oct 13, 2009 | 1994 Jeep Cherokee Country

1 Answer

Computer light says service 4 wheel drive switch

According to the mechanic who works on my 94 Jeep it's one of three things:
1) Corrosion on the connector to the switch (which is located on top of the transfer case).
2) A bad switch. Part cost about $22.00 or,
3) A bad console display. he says they have had a fair number of console display units fail.

Jul 12, 2009 | 1995 Jeep Grand Cherokee

2 Answers

Clunk in rear end after braking

I don't have a solution yet but my 94 jeep cherokee does the very same thing. I thought it might be in the rear axile.

May 11, 2009 | 1994 Jeep Cherokee Country

2 Answers

Changing my 1989 from 4 wheel drive to 2 wheel drive and Anti-Locking Braking System

An ABS system will have wheel sensors installed. Remove one of your wheels and look for a wiring harness that runs to your steering knuckle(the part that you brake rotor and strut is attached to. Also, either you front half shaft or brake rotor will have what looks like gear teeth on them. These are the magnets the sensor reads. If your Jeep has either of these it has an ABS system. Secondly the chassis on the Cherokees should be the same irregardless of trim level (limited vs regular). These trim levels affect the interior trim and power extras only not the mechanical parts.

Oct 05, 2008 | 1989 Jeep Cherokee

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides