Question about BMW 528

1 Answer

Bmw 728i 1997 need to know the right torque to tighten waterpump nuts and need the torque spec for the thermostat nuts to

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,793 Answers

Both these items do not have torque settings,but if you use a 6"long wrench(spanner)to firm hand tight. that is sufficient.dont forget to use a non setting gasket sealant,

Posted on Aug 24, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 f150 5.4 4x4 front wheel bearing torque specs


If you have it apart, you should know already. If not, and you're doing this right, it should have four bolts, correct? I wouldn't worry about torquing them to anything specific, I'd tighten them snugly, then maybe 1/8 to 1/4 turn more in a criss-cross pattern. should be fine, they're not head bolts or lug nuts, so torque specs aren't necessary, but if you REALLY need the torque spec, I'd suggest going into an f-150 forum, sounds like a logical thing to do.

Mar 21, 2017 | Ford F-150 Cars & Trucks

1 Answer

Find the torque specification for a 2007 corolla windshield wiper arm nut


Good luck finding that torque spec. Tighten it until you can't tighten it anymore.

Feb 21, 2015 | 2007 Toyota Corolla

2 Answers

1995 ford windstar thermostat housing bolt torque spec


Most people don't bother using a torque wrench to tighten a thermostat housing.

It is more important to be careful and tighten each bolt a little at a time. You do not want to warp, crack, miss align the part you are bolting.

It does not take a lot of torque to seal a thermostat housing. I would guess somewhere between 15 and 20 ft lbs.

It is often hard to find such torque specs for specific vehicles.

For bolts that you cannot find a specified torque spec, you can refer to a standard bolt torque chart. The charts are based on the diameter of the bolt threads not the wrench size used to fit the bolt head. The charts also depend on the hardness of the bolt material. Also keep in mind the material you are bolting into.

Here is one such chart...
http://www.dansmc.com/torque_chart.htm

Keep in mind that thermostat housing bolts are just sealing a gasket. They are not holding the entire car together.

After turning wrenches for many years, most mechanics just know by feel.

There are cases where a torque wrench is mandatory. Like head bolts, wheel bearing/hub nuts, rod caps, main bearing, etc.

Jul 16, 2014 | Ford Windstar Cars & Trucks

1 Answer

What torque specs do u tighten the front shock absorbers nuts to


adjust the nuts until there is tension placed on the rubbers. You will see the rubber start to slightly bulge out under the washers and that will be the correct tension

Dec 18, 2013 | 2000 Jeep Grand Cherokee

1 Answer

Need to know the torque value of hub axle nut on 1996 mercury mistique..


It is very smart of you to want to torque the axle nut, the number one cause of wheel bearing failure is due to improper nut tighening. a lot of techs just use an impact gun to tighten the nut and that is very bad,Anyway the torque specs are to tighten to 214 ftlbs. god day

Oct 14, 2012 | Cars & Trucks

1 Answer

I need the torque specs on a rear axle pinion nut for a 2003 Dodge Ram 2500 4/4 Cummins, Automatic.


The pinion nut does not have a torque spec. as in how tight the nut is. The amount of torque is measured in bearing preload. You will need a "torque to rotate" torque wrench. If you are using new bearings the torque spec. is 15-25 in. lbs. If you are using your old bearings the torque spec. is 10-20 in. lbs to rotate. To measure this you will need to tighten the nut in small increments then use the torque to rotate wrench to turn the pinion without the carrier/ ring gear installed. Repeat until desired torque is reached.

Jan 29, 2011 | Dodge Ram 2500 Cars & Trucks

1 Answer

Torque specs needed


on a 1999 Honda Accord, the torque for the front axle nut is 181 ft lbs. For the most part, sung it up and then go a bit further. If you are reusing the old axle nut, tighten it until the stake mark on the nut lines up with the notch in the axle (make sure to re-stake it). check out alldata.com/diy for individual vehicle subscriptions which have all the repair info you will ever need. If you had the steering knuckle out, tighten the balljoint nuts on the upper and lower control arms until they are tight and then tighten until the hole lines up to recieve the cotter pin.

Mar 18, 2009 | 1997 Honda Accord

3 Answers

Need torque specs


Torque sequence:
Step 1: Torque 29 to 34 Ft/Lbs
Step 2: Torque an additional 90 to 120 degrees

Oct 14, 2008 | 1997 Ford F150 Regular Cab

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...