Question about 2009 Chevrolet Equinox

1 Answer

Location of oil filter on 2010 equinex (4 cylinder)

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

When Looking At The Front Of The Vehicle, The Oil Filter Is Under The Right Side Of The Intake Manifold (Located Just Above The Bell Housing). In Order To Change It, You Will Need A 36mm ECOTEC Filter Wrench (Its A Really Shallow Socket) A Swivel, 12" Extension & Ratchet. The Thing You Are Removing Is The Black Cap. Rotate It Until It Can Be Removed By Hand & Lift Out. When Installing The New Filter, Make Sure The Little o-ring Came w/ The Old Filter & Drop The Filter & Cap Straight Down Into The Block --HAND TIGHTEN-- Until The Factory O-ring (Its Reusable) Contacts The Block & Finish Tightening w/ The Socket - Just Needs To Be Snug, Dont Stupid Tighten It or It Will Break.

Posted on Sep 17, 2010

  • 3 more comments 
  • Wsamus Sep 20, 2010

    My Appologies, The Socket Is A 32mm ECOTEC Style, Not 36mm. Here Is A Link To The Socket.
    http://buy1.snapon.com/catalog/item.asp?...

  • Wsamus Sep 20, 2010

    http://buy1.snapon.com/catalog/item.asp?...

  • Wsamus Sep 20, 2010

    http://buy1.snapon.com/catalog/item.asp?...

  • Wsamus Sep 20, 2010

    Once On The Snap-On Page, Search 'A106' In The Snap-On Parts Fiels, It Should Come Up As The GM ECOTEC Oil Filter Socket.. I Dont Know Why The Previous Posted Links Did not Take Correctly.

  • Judy Mauldin
    Judy Mauldin Jan 24, 2013

    where is the fuel filter located on a 2009 Equinox?

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2010 malibu 4 door 4 cylinder. engine light keeps going on and off. have changed oil and filter, new gas cap. what else can I do??


Get the trouble codes read that are stored in the computer. That's ALWAYS the first step. Otherwise you're just guessing.

Jul 21, 2017 | Cars & Trucks

1 Answer

Where is oil filter on 2010 chevy malibu


If this is a 4 cylinder engine, the oil filter is located on the front side of engine towards the driver side. here is a picture


mrtechwrench_39.gif

Aug 20, 2011 | Chevrolet Malibu Cars & Trucks

2 Answers

Can't find oil filter, need location


2.2 ecotec motor?

The oil filter is located under the oil filter cap located on the drivers side front of the motor. Remove the plastic cover that goes over the top of the engine. As your standing in front of the vehicle look down and just to the right of the intake manifold. You will see a black plastic cap about 3" in diameter. It will have what looks like a large bolt head molded into the top of it. Remove that cap and the oil filter will be under it.

airjer995_63.jpg

Apr 21, 2011 | 2004 Pontiac Grand Am

3 Answers

How do you drain the oil filter on a 2010 chevrolet equinox - 4 cylinder? I've researched and found out that the oil filter is on top of the motor and not underneath.


Since it is a cartridge type, when you take the top off it shouldn't spill any oil. It takes a 32mm socket to take the top off.

Jan 08, 2011 | Chevrolet Equinox Cars & Trucks

1 Answer

WHERE IS THE OIL PRESSURE SENSOR on a 2002 ford escape


On 4 cylinder engines: The oil pressure sending unit is located in the rear of the block near the oil filter housing
On 6 cylinder engines: Sending unit is located near the oil filter housing behind the air conditioning compressor, on the front side of the block

Dec 22, 2010 | 2002 Ford Escape

2 Answers

Where is the oil filter on the 2010 gmc terrain 2.4


The oil filter on the 2010 GMC Terrain is located in the engine compartment. You'll need a short depth 1-1/4" socket wrench to loosen the cap. The cartridge is in the canister under the cap.
2010 gmc_terrain-flnatfuu5vnw04sfvkkswjzt-3-0_0.jpg

Sep 20, 2010 | 2009 GMC Envoy

3 Answers

Where is the oil filter on a 2010 GMC terrain 4 cylinder engine?


The oil filter on the 2010 GMC Terrain is located in the engine compartment. You'll need a short depth 1-1/4" socket wrench to loosen the cap. Loosen cap and remove to access oil filter cartridge.
2010 gmc_terrain-flnatfuu5vnw04sfvkkswjzt-3-0.jpg

Jul 31, 2010 | 2009 GMC Envoy

1 Answer

On a 1994 Honda Accord is the oil filter located on the passenger or driver side of the engine?


Fig. 1: Oil filter and drain bolt locations on 4-cylinder models 86801050.gif
Fig. 2: Oil filter and drain bolt locations on 6-cylinder models 86801051.gif

Jun 28, 2010 | 1994 Honda Accord

1 Answer

Oil filter location


The V6 has a screw on filter unlike the 4 cylinder which has a cartridge filter. The filter is located in one of 2 positions depending on which V6 you have. On one V6 it is located under the car towards the front where there is a splash guard that is held in place by two thumb screws. Remove the thumb screws take out the splash guard and there it is. On the other V6 it is located under the air tube that comes from the air filter where you will see a nut about the size 3/4 or bigger just unscrew it and change your oil filter.

May 01, 2010 | 2002 Pontiac Grand Am

1 Answer

Where is the oil filter located on 2010 camy?


The oil filters on the 2010 Camry product are no longher 'spin-on' filters. The new style of filter being used are the 'cartridge' type. The filter is in an aluminum cylinder, under the engine. Toyota recommends the use of a special tool to remove the cartridge cylinder. Also note that you need to use the exact oil specified for your car. If you do not, your variable valve timing will not work properly, and you check engine light will come on. If the car specifies to use full-synthetic, you should not use anything else.

Nov 21, 2009 | 2009 Toyota Camry

Not finding what you are looking for?
2009 Chevrolet Equinox Logo

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

79851 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...