Question about 2007 Toyota FJ Cruiser
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: remove passenger side mirror
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Then you can access the bolts that secure the mirror onto the door
Posted on Sep 29, 2009
turn ignition to "on"; set your odomoter trip meter display to trip "A" turn off the ignition; hold down trip reset button while turning ignition back to "on" position; hold the button for around five more seconds until it shows a full display of zeroes (ex. "00000000") light should procede to turn off
Posted on Oct 07, 2009
Open the trunk and along the bottom of the tail light, there should be a Philips screw securing a cover piece. (your car may or may not have this piece)
With the cover off, there will be another 2 screws securing the bottom of the tail light assembly. Remove the screws and pull the bottom out and the top is held in by two retainers that should just slide right out
Posted on Oct 13, 2009
There are two fuses for the tail light circuits. That bare wire caused a short, which popped the fuse for the trailer lights circuit. Look at the fusebox under the hood, and you will be able to fix it.
Posted on Nov 03, 2009
To remove mirror pry off inside triangle panel(black) which exposes 3 nuts which are removed with socket wrench. Detach wire harness and pull out mirror assembly. To replace insert new mirror screws thru assigned holes and reconnect wire harness and tighten nuts to snug. Push inside triangle panel back into place and you're done! It's that easy.
Posted on Jan 06, 2010
Tips for a great answer:
May 13, 2015 | Toyota Cars & Trucks
Mar 31, 2013 | 2007 Toyota FJ Cruiser
Aug 29, 2012 | 2007 Toyota FJ Cruiser
Jun 27, 2011 | 2010 Toyota FJ Cruiser
Aug 30, 2010 | 2007 Scion tC Coupe
Aug 03, 2009 | 2007 Toyota FJ Cruiser
May 20, 2009 | Toyota FJ Cruiser Cars & Trucks
Mar 20, 2009 | 2007 Toyota FJ Cruiser
Feb 24, 2009 | 1991 Toyota MR2
337 people viewed this question
Usually answered in minutes!