Question about 2004 Honda Odyssey
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
open the rear hatch. Between the tail light housing and the rear hatch opening there is a trim strip with two flush fitted flap doors. Insert a small straight blade screwdriver into the small slot on the tail light side of the flap. Pry gently inboard and the small flap will open (the hinge side of the flap is on the side of the rear hatch opening.) Now you can remove the screws that hold the tail lamp assembly in place. Finally, there is still a "spear point" clip that fits into a socket near the front outboard corner of the assembly. Gently pry with a tape wrapped screwdriver (avoids scratches) and force the assembly straight back. The clip should release and free the assembly so you can change the bulb(s).
Posted on Jan 24, 2009
If you have jumper cables, connect them to the honda as if you were going to try to jump it off. Be sure to have your foot on the brake when trying to shift. You can also use a "Settings Saver" that plugs into your cigarette lighter. This will provide enough power to allow it to shift.
Posted on Apr 10, 2009
open the rear hatch. Next to the brake light assembly, between it and the hatch there are two flap doors in the brake light trim. Take a small flat blade screwdriver and open these doors. The hinge side of the flap is nearest the hatch opening. When opened, the flaps will reveal two screws. Remove these. Then wrap a flat blade screwdriver with some tape (protects the paint) and put the blade at the front outside corner of the brake light assembly. Pry gently rearward and a plastic spear point clip will release. With the assembly off, you can see how to twist out the bulb sockets and replace the bulbs. to replace, put the spear point clip in first, replace the screws, and close the flaps in the trim.
Posted on May 30, 2009
Tips for a great answer:
Jul 12, 2014 | 1998 Buick Park Avenue
May 28, 2012 | 2002 Honda Odyssey
Mar 17, 2011 | 2001 Honda Odyssey
Jan 27, 2011 | 1999 Honda Odyssey
Oct 02, 2010 | 2001 Honda Odyssey
Dec 14, 2009 | 2000 Honda Odyssey
Dec 07, 2009 | 2001 Honda Accord
Apr 23, 2009 | 2002 Honda Accord
789 people viewed this question
Usually answered in minutes!