Question about 2007 Toyota Sienna

1 Answer

The passenger side windshield does not work. how do you fix or change out the windshied wiper, it is bent a little?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    MVP:

    An expert that gotĀ 5 achievements.

    Master:

    An expert who has achieved Level 3.

    Sergeant:

    An expert that hasĀ over 500 points.

  • Master
  • 450 Answers

Remove the windshiel wiper and see if it is moveing freely the wiper may be striped try a new wiper

Posted on Aug 24, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Passenger Windshield Wiper Not Working


If it were the motor neither side would move. Chances are its the linkage.
You'll probably need to remove the panel under the windshield to access the linkage and check it out.

Feb 06, 2014 | 2004 Chevrolet Cavalier

1 Answer

Passenger side windshield wiper working slow


there is 2 wiper motors . 1 for the drivres side and the other for the passenger. sounds like a bad passenger side motor

Dec 21, 2012 | 2005 Chrysler Pacifica

1 Answer

My 2003 Sante Fe drivers side windshield wiper is not working. Passenger side is OK


Remove the wiper arm by taking the nut off the end of the post coming through the base of the wiper. turn on the wipers and if the little post is turning back and forth with the other wiper, then you need a new wiper arm. the little serrations on the inside of the arm's base get stripped, usually from turning the wipers on when they are stuck to the windshield by ice. if the little post is not turning then you need a new wiper transmission. you will need a repair manual for that.

Dec 13, 2010 | 2003 Hyundai Santa Fe

1 Answer

2006 hhr passenger side windshield wiper not moving but drivers side is fine??


First remove the complete passenger side wiper check and make sure splines on wiper are not stripped. If this is not the problem It could be a linkage bar from the wiper motor to the wiper off or disconected. Since both wipers share the same motor if one works the other should. Check this by removing both wipers and then "Cawl" (little black piece between the hood and windshield underneath the wipers) Underneath the cawl you should be able to see the windshield wiper motor, and linkage bar to both of the wipers. See if the bar is disconected from the passenger side. If it is than reconnect it. These are the only two possible scenarios.

Jul 18, 2010 | Chevrolet HHR Cars & Trucks

1 Answer

Windshield wipers do not work sometimes.now the passenger side works but not drivers side


Check windshield wiper motor module to make sure connection is fully snapped in to place and wires are not bent or loose. New module is around $35.

May 29, 2010 | 1998 GMC Jimmy

2 Answers

The windshield wiper on driver's side always misses a spot even when replaced


There may not be enough pressure on the wiper arm to press the blade onto the glass. Or, if you have been replacing the blade only, replace the entire cartridge and blade.

Check the spring tension on the wiper arm as well and the shoulder pin connecting it to the wiper motor to see if it is loose. If it is much looser than the passenger side, then put in a new wiper arm assembly. If it is not loose, check to see if it is bent...then you may just be able to get away with bending it back into position.

Jan 01, 2010 | 1993 Ford Crown Victoria

1 Answer

Passenger wiper quit working


motor only drives one arm to wipe. the passenger side arm might be disconnected. you have to reomve parts and visulally inspect. you might need a bolt or a washer, but should be an easy realignment fix.

Feb 26, 2009 | 1999 Buick Century

1 Answer

One front wiper not working on Outlander 2003


if you open the hood look towards the base of the windshield, you should see the linkages for the wiper arms. make sure the linkages are all in-tact and nothing fell off. if the linkages are all good, see if you can move the passenger side wiper with your hand, if it moves freely or with little resistance check the nut/bolt that hols it on at the end of the wiper arm. see if the nut/bolt is loose. tighten if needed. also you can remove the nut/bolt and check the splines on the wiper arm where it presses onto the stud and see if they are wiped out.

Feb 19, 2009 | 2003 Mitsubishi Outlander

1 Answer

Having problems changing my wiper blades ive tried prying them off with a flat blade screw driver pulling on them how do they come off i also bent the passenger side wiper arm how do i get it so the blade...


You must Pull both sides Away From Windshield While keeping the middle Down And While Both sides pulled Back then Pry at the Atachment Point. it will Slude off the Pin Hope this Helps Please RATE ME

Jan 18, 2009 | Chevrolet Lumina Cars & Trucks

4 Answers

My driver side windshield wiper was frozen to the windshield. I forgot to shut them off when I went to work. When I came out and was brushing off the snow I realized that they were not off. Then the driver...


I just solved this problem last night with my '05 Impala, and ultimately the solution was what newton5083 stated above.  Yet, it may also be this (I found it online somewhere):
You have bent or broken the "park tab" on the windshield wiper motor bracket. The correct way to fix this is to remove the wiper arms, wiper linkage and wiper motor from the wiper motor bracket, and install a new bracket.
I just bent the tab back into place a couple times for our daughters 2005 Impala but it kept getting bent down again when they didn't take the time to make sure the wipers were not frozen to the windshield, or tried running the wipers to remove heavy snow on the windshield. So yesterday I fabricated a small piece of metal and bolted that to the bracket in the same place the tab stop was.
If someone wants to access this bracket and tab-
1. Use a ½ inch or 13mm socket & ratchet or wrench to remove nuts on wiper arms.
2. They may make a special tool to remove the arms, I used a screwdriver and hammer to tap bottom of the arm to wedge them apart from the spindle.
3. Two small button-looking clips hold the drivers side cowl cover in place under the windshield. These are two-piece clips, pry up the center, than the outer piece.
4. Unclip the washer hose from cowl cover, than pull out plastic cover.
5. There is a smaller plastic cover with on plastic button head holding that cover in place. Gently pry under that clip to remove that cover.
6. Now you can see the wiper trans and bracket. You should see a small tab on that bracket that looks pushed down and bent or possible a square small hole with some torn off metal where the tab broke off.
7. Remove small plastic cover over the wiper transmission and you can see a small spring-loaded arm underneath the wiper transmission assembly.
8. You need to find something to pry that tab back up so when the wipers are running that spring loaded little arm just snaps past the tab running clockwise. It's when you shut off the wipers that the wiper transmission assembly reverses rotation counter clockwise and the small spring loaded arm underneath hits that tab stop, than the wipers will go all the way down and shut off as they should.
Once that tab stop gets bent out of the way the little spring loaded arm has nothing to stop the wiper transmission assembly so it keeps traveling counter clockwise until some other stop shuts the wipers off straight up on the windshield.

There is a revised bracket part # which is supposed to be more durable, GM part #12368639. Here is a copy of the TSB which points out this problem:
Bulletin No.: 05-08-43-003A
Date: March 10, 2005
TECHNICAL
Subject:
Windshield Wipers Park in Up Position (Replace Windshield Wiper Motor Bracket)
Models:
2005 Chevrolet Impala, Monte Carlo
Supercede:
This bulletin is being revised to make a correction to the Parts Information. Please discard Corporate Bulletin Number 05-08-43-003 (Section 08-Body and Accessories).

Condition
Some customers may comment that the windshield wipers park in the out wipe (vertical) position.
Cause
This condition may be caused by a bent park tab on the windshield wiper motor bracket.

Correction
To correct this condition, replace the wiper motor bracket. It will be necessary to transfer the following parts listed below to the new bracket.
^ Wiper transmission
^ Wiper motor crank arm
^ Wiper motor
1. Remove the windshield wiper motor drive system module.
2. Remove the windshield wiper transmission from the windshield wiper motor bracket.
3. Remove the wiper motor crank arm from the windshield wiper motor.
4. Remove the windshield wiper motor from the bracket.
5. Install the windshield wiper motor to the new bracket.
6. Install the wiper motor crank arm to the windshield wiper motor.
7. Install the windshield wiper transmission to the windshield wiper motor bracket.
8. Install the windshield wiper motor drive system module.

A TSB is not a recall, if vehicle is still under warranty the dealer should be repaired for free. If not, you'll have to pay for the repairs. 

Dec 10, 2008 | 2005 Chevrolet Impala

Not finding what you are looking for?
2007 Toyota Sienna Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...