Question about Pontiac Bonneville

1 Answer

I have a 91 pontiac, I've been told how to reset the shifting, because it shifts too late, but looking at it, I can't find the piece i press and hold so i can pull the tranny line to reset it

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Pontiac Master
  • 4,514 Answers

U mean a TV cable that goes from ur throttle body to trans-its easy just bring it to a parts place if its that hard to find but make sure fluid is rite with reg maintence bands may need ajust too etc--20yr

Posted on Aug 24, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2005 Saturn Vue, lately I've noticed my gear shift is super hard to shift into 1st & so on. Is it the cold weather, and if so, is there something i can do to make it manageabl


check clutch hydrolics to make sure fluid is not low. Try double clutching. When in neutral, push clutch in, then out and in again and try shifting into low.

Jan 07, 2015 | 2005 Saturn VUE

1 Answer

2006 Pontiac Montana delayed transmission shift


my best answer would be is to check the condition of its fluid it might need a fluid and FILTER change .

Jun 06, 2014 | 2006 Pontiac Montana SV6

1 Answer

91 pontiac grand prix se key stuck in ignition


91 Grand Prix SE: If you can turn car off with the key, but can't get the key out - first thing you should check is to see if the button on the shifter is fully releasing (the button on the shift handle you have to push to shift out of Park).

Dec 23, 2012 | 1991 Pontiac Grand Prix

1 Answer

Trans not shifting properly


Having the same issue in my th350 most likely you don't have proper vacuum or you kickdown is stuck. Check for vaccum lines and let me know what you find

Aug 29, 2012 | 1995 Chevrolet Blazer

1 Answer

I've noticed that my 95 camaro automatic shift


Your shift cable has stretched.Replace cable.

Feb 24, 2012 | 1995 Chevrolet Camaro

1 Answer

1998 pontiac grand prix se shifts fast and hard, or shifts late. what can cause this


On the trottle body there is the trottle valve cable or TVC. This is what regulates the pressure in the transmission and determines how hard and when to shift. If you adjust this by moving the throttle cable forward towards the headlights it will result in an earlier smoother shift.

Mar 31, 2011 | 1998 Pontiac Grand Prix

1 Answer

2007 pontiac vibe gear shift light replacement. How do I get console apart to replace bulb.


On the 2004 Pontiac Vibe that I owned, I ended up taking it to the dealer. Perhaps this advice can avoid having you end up at the same place!

Remove the middle environmental control knob (fan blower speed, I think) by tugging on it until it comes off. Underneath you will find a single Phillips screw. Remove the screw and gently (so you don't mar it), pull at the plastic trim surrounding the environmental control area. It should pop out. You may also want to remove the two-prong AC outlet by prying it gently out with a small slotted screwdriver before attempting to pry out the trim panel.

After that panel is out of the way, you are ready to tackle the plastic trim surrounding the shift knob. Begin by removing the small holding compartment at the base of the shift knob. There is a single Philips screw holding the plastic piece to a supporting brace on the lower end. Four additional screws on the upper end are revealed by the removal of the environmental control trim piece as previously described.

Okay, from there, you're ready to gently pry loose the trim panel surrounding the shift knob.

The bulb can be located on the driver's side. It's a 'funny' looking bulb that is integrated into a two wire bundle. You may end up having to replace the bulb+wire bundle as a unit. The electrical connector is on the opposite side of the shift knob.

Good luck!


Feb 20, 2010 | 2004 Pontiac Vibe

1 Answer

My 03'Pontiac Montana quit shifting. The arm moves freely but nothing happens. I was told by a friend that a coupler connected to my shift arm was broken. how do I fix this coupler?


sounds like you need a new shift cable most likely- can you hear like a rachet noise when shifting if not proberly cable you need two people one in car shifting linkage with car off the other looking at trans linkage below brake master cylinder to see if linkage moves if linkage moves you have internal trans problem

Oct 10, 2009 | Pontiac Montana Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7710 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...