Question about 2005 Audi A3

Open Question

Audi A3 1.9 tdi EPS malfunction code required. Description- EPS light kick in and at the same time the engine cuts out. The car restarts okay and the light goes back out Nothing seems to trigger this happening. No skid, loss of grip, breaking or touching any other switches. Is this a relay problem. Advice welcome.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: My Audi A3 2.0 tdi limp mode/turbo overboost

i also have done a diagnostic test and it states a turbo overboost condition and it drives fine locally but loses power on the motorway and struggles to reach 80mph? any suggestions please email me at shiz86@hotmail.co.uk

Posted on Sep 14, 2009

TDISLine
  • 1874 Answers

SOURCE: Fuse list for audi a3 sline 2 ltr tdi

Fuse nr. 24, F24, (20A) = Cigarette lighter

Posted on Feb 14, 2010

TDISLine
  • 1874 Answers

SOURCE: Where is the crank sensor

The Crankshaft Position (CKP) sensor on an Audi A3 2.0 TDI

tdisline_1.png

Posted on Nov 08, 2010

  • 68 Answers

SOURCE: Engine stops while driving & engine revs high between gear change

hi i am dieter
im dave

here is something to try
keep some cold water with you and the next time it happens very quickly get out and pour the water on the crankshaft sensor then restart. If it starts right away without the usual two minutes than you will need to change this sensor. The sensor is easy to find you will see a wiring harness around the crankshaft pulley(the large one at the bottom the basically runs all your accessories like the p/s pump, alternator, water pump). Try to famaliarize yourself as to the location of the sensor first so that you can try to restart it within about 30 seconds.

Posted on Nov 28, 2008

chain saw
  • 94 Answers

SOURCE: Electrical problem Audi A4

ELECTRONIC STABILITY PROGRAM ( ESP) LIGHT FLASHES TO INDICATE UNSTABLE DRIVING CONDITIONS....WHICH WILL ALSO COME ON IF YOUR ENGINE IS MISFIRES.. CHECK THE COILS AND SPARK PLUGS FIRST THEN GO FOR FUEL..INJECTORS...FUEL FILTER CHOKED..HOPE I WAS OF SOME HELP TO YOU..

Posted on Feb 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are the symptoms of bad crankshaft sensor


the crank sensor detects engine revolutions so i would,nt have thought it was that by your description of symptoms, as the crank sensor would'nt know if engine was hot,cold or inbetween, have you had the OBD codes read ?

May 25, 2014 | 2004 Audi A3 Sportback

1 Answer

Im getting error code 513 in my Audi A6 2,5 TDI and I cant find the issue with it?


IF U HAVE NO MALFUNCTION OF THE CAR U CAN IGNORE THEM FOR NOW.THOSE CODES INDICATE NO OR FAULTY COMMUNICATION TO THE ENGINE ECU!!!LET ME KNOW!!

Apr 01, 2014 | Audi Cars & Trucks

1 Answer

My audi a3 2.0 tdi has cut out and wont start seems like it is turning over really easy it has done 66k and was no funny noises there is no warning lights or anything. All warning lights work, car will...


Time to have a mechanic diagnose it...judging by your description...do you race the vehicle??? is it well Maintained??? Did you buy it new??? have you had the timing belt, and tensioners replaced??? If the timing belt gave way, and there were no funny noises, that means your car has a "non interference" engine, which is a very good thing...find a mechanic that you, or some of your friends trust, and let him/her take a look at it...you might need to leave it for a while...good luck...

Jul 30, 2012 | 2004 Audi A3 2.0

2 Answers

P0471 and p2002 codes, Audi A6 2.0 DPF S-Line Auto


The DPF is designed to be self-cleaning to a certain extent if the engine is run for a good length of time the deposits should burn off. I would kick up a fuss with Audi about the warranty, ask them to show its exclusion. Unless the DPF has become physically damaged by something you have done then they need to have it fixed as it is a result of the deficiency in their design. This is not like some damaged tyre, open to abuse by the driver, the DPF is integral to the vehicle operation and through no commission on your part it is not functioning as it should.

Jul 27, 2010 | 2008 Audi A6

1 Answer

Where is a power steering pump located on a 4 cylinder chevy cobalt ls


Your Cobalt is not equiooed with a Power Steering Pump. It has electric power steering. See the description below.

Power Steering - System Description and Operation
The electric power steering (EPS) system reduces the amount of effort needed to steer the vehicle. The system uses the body control module (BCM), power steering control module (PSCM), torque sensor, discrete battery voltage supply circuit, EPS motor, serial data bus, and the instrument panel cluster (IPC) message center to perform the system functions. The PSCM, torque sensor, not the EPS motor are serviced separately from each other or from the steering column. Any EPS components diagnosed to be malfunctioning requires replacement of the steering column assembly, also known as the EPS assembly.

Nov 20, 2009 | 2005 Chevrolet Cobalt

1 Answer

Where is a power steering pump located on a 4 cylinder in a 2005


Your Cobalt is not equipped with a Power Steering Pump. It is equipped with electric power steering. See the description below.


Power Steering - System Description and Operation
The electric power steering (EPS) system reduces the amount of effort needed to steer the vehicle. The system uses the body control module (BCM), power steering control module (PSCM), torque sensor, discrete battery voltage supply circuit, EPS motor, serial data bus, and the instrument panel cluster (IPC) message center to perform the system functions. The PSCM, torque sensor, not the EPS motor are serviced separately from each other or from the steering column. Any EPS components diagnosed to be malfunctioning requires replacement of the steering column assembly, also known as the EPS assembly.

Nov 20, 2009 | 2005 Chevrolet Cobalt

1 Answer

Audi a4 tdi 2001 model engine cutting out


Possible Cat converter is building up a restriction. Muffler shop can test,

Sep 18, 2009 | 2001 Audi A4

1 Answer

Engine managment light is on


this means that one or more of over 200 electronic engine control malfunctions has ocurred, u must get the system tested for the trouble code(s) that was stored with the light coming on.

Jun 19, 2009 | 2005 Audi A6

1 Answer

ABS & EPS lights came on -waiting at Trafic Lights engine cut out


you need to get the car plugged into diagnostic equipment,it could be anything if you live in kent i could vag.com it for you

Feb 06, 2009 | 2004 Volkswagen Passat

2 Answers

Electrical problem Audi A4


ELECTRONIC STABILITY PROGRAM ( ESP) LIGHT FLASHES TO INDICATE UNSTABLE DRIVING CONDITIONS....WHICH WILL ALSO COME ON IF YOUR ENGINE IS MISFIRES.. CHECK THE COILS AND SPARK PLUGS FIRST THEN GO FOR FUEL..INJECTORS...FUEL FILTER CHOKED..HOPE I WAS OF SOME HELP TO YOU..

Feb 03, 2009 | 2001 Audi A4

Not finding what you are looking for?
2005 Audi A3 Logo

Related Topics:

667 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14338 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...