Question about Honda Accord

Open Question

Light resembling an open ended wrench appears...need to reset.

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Light on dash with open wrench nd four wheels with front wheels turned


The light is a service needed reminder, consult the dealer or your owners manual for details

Jan 12, 2017 | Cars & Trucks

1 Answer

Oil light with wrench showing on


It seems to be time for an oil change! If you already changed your oil you are going to need to reset the change oil light.


To reset the Change Oil light you will need to turn the ignition key to the open position then back to off 3 times.
After the third time leave it on in the open position then depress the gas pedal to the floor 3 times.
Turn key off and it should now be reset.

Mar 13, 2013 | 2005 Chevrolet Impala

2 Answers

Why does a wrench sign appears on the dashboard


Wrench light is a service due light and comes on every 10,000 klms. To reset light hold trip meter reset button in and turn on ignition whilst remaining hold on button for approx 10 seconds. spanner light will go out

Nov 24, 2012 | 2007 Ford Explorer Sport Trac

1 Answer

2000 Dodge Grand caravan Inner tie rod end


use a pipe wrench also known as a monkey wrench that will work just make sure there is not a lock screw keeping it from turning some aftermarket inner tierods have alittle allen head screw to keep them from turning

Aug 27, 2012 | 2000 Dodge Grand Caravan

1 Answer

Trying to get h2o sencor off but open ends dont work what do i use


Open Ends work, as do Flare Nut

You need the correct metric wrench to work
on any vehicle from 1980 on

You can also buy an O2 Sensor Socket or Wrench

Jul 11, 2011 | Honda Accord Cars & Trucks

1 Answer

How do you get the top bolt off the back shock


make sure you turn off air suspension switch.you remove retaining nut by grasping steel dust tube.you need to place an open end wrench onto the hex stamped into metal cap of the dust tube.so you need open end wrench on top shock where you see hex nut on top shock metal cylinder.wrench will hold stud in place while you loosen top shock retaining nut.

Apr 03, 2011 | 1991 Lincoln Town Car

1 Answer

The message center is showing an indicator that resembles a wrench with lines going across it. what does this mean


check engine light...make sure the gas cap is tight and makes a clicking noise first off. disconnect the NEGITIVE (black) battery connection and wait 10 min. reconnect battery and drive as normal as possible for 10-20 miles doing 45-65 MPH, with stop and go traffic too... if the light is on or comes back on you have a malfunction and need to find out what code is stored in the ecm.

Mar 07, 2011 | 2003 Chevrolet Monte Carlo

2 Answers

Do you need a tool to remove trans cooling lines from ardiator on a 2000 impala


We usually use a line wrench for those fittings, but if you can loosen then with an open end wrench it will save you from having to buy a $10 line wrench. They are standard sizes, like 13, 14, or 15 mm.

Sep 10, 2010 | 2000 Chevrolet Impala

1 Answer

A symbol appeared on my dashboard


It means that the one of your tires needs air and out of balance.

May 22, 2010 | 2005 Infiniti G35

1 Answer

When turning rear end makes a sound that resembles


Sounds like a wheel bearing. Need to get it on hoist so can check wheels for play.

May 01, 2010 | 2004 Buick Rendezvous

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

75005 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7711 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...