Question about Buick Century

Open Question

Where could I find a 1989 Buick Century 4 cyclinder 2.5 liter Belt diagram for the belt that runs the water pump, alternator, air, ect. The belt broke while I was driving so I could not see how the belt is supposed to go around the pulleys.

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1985 buick century custom


check each pulley for issues like rough surfaces pits and cracks..be sure most of the pulleys turn by hand to some degree with no resistance( or very little) the alternator, water pump , powr steering and ac clutch pulleys should turn free.. if not, find out why.. also check for almost ferfect alignment..they should all be straight in line with each other if not find out why..repost findings..

Feb 05, 2013 | 1985 Buick Century

1 Answer

Olds 307 Belt Diagram


307's have a unusual routing, it's easy to get confused.

From back to front:
1) Crank - Water Pump - Air Conditioning
2) Crank - Power Steering - Water Pump
3) There are two versions, depending on how many grooves the power steering pump has:
(1-groove P/S):Water Pump - Alternator
(2-groove P/S):Crank - Power steering - Alternator - Water pump
4) Crank - Air Pump

May 14, 2012 | Cars & Trucks

1 Answer

Belt routing for 1989 buick century 2.5L ENGINE


http://cdn.2carpros.com/diagrams/23710/large.gif?1288455482

Jan 19, 2012 | 1989 Buick Century

1 Answer

How do I remove water pump on my 98 buick century 3.1 liter


Hello,

To remove the water pump of your buick, please follow the steps below. They are quite technical but these steps will guide You through how You will remove the water pump from the car.
  1. Disconnect the negative battery cable.
  2. Drain cooling system in to a drain pan.
  3. Remove the serpentine belt.
  4. Remove the heater hose and radiator hose.
  5. Remove the water pump cover attaching bolts and remove the cover.
  6. Remove the water pump attaching bolts and remove the water pump.
That is how to remove the water pump from Your car. Hope this helped. Thank You for using FixYa!!!
Toyladi3

Jan 15, 2011 | 1998 Buick Century

1 Answer

Starting car, 1989 Buick Century, screechy noise for about 5-10 seconds. Probably belt. How to change? Is there a free online manual?


if your belt looks good and its loose tighten it you also may have oil or water leaking on belt from valve cover good luck

Dec 13, 2010 | 1989 Buick Century

2 Answers

Fan belt routing for 91 buick centuary 2.5 liter with ac


Click on the following free direct Link. It has the correct Belt Diagram for your 1991 Buick Century 2.5L In-Line 4-Cylinder.

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/1991/make/buick/model/century/1991_buick_century_drive_belt_routing_diagram.htm

Jan 14, 2010 | 1991 Buick Century

1 Answer

Looking for a diagram for serpentine belt placement for 1989 chevy corsica 2.0 liter


Go to the web site below. (copy and paste the address into your browser).

http://www.daycoproducts.com/daycoweb.nsf/cf652a4feb630ad0862571a4005ae40c/a866a821123f887c862571a5006988df!OpenDocument

Above the photo are 2 PDF documents. The first - Routing Guide gives you the diagram code for the car and engine. See page 30 for the 89 CHEV Corsica 2 liter.
There are 2 belts - one for the air conditioned equipped engine (diagram 6-3) and one without the aircon (diagram 5.3).

Next go to the second document - Illustration guide PDF document - for those 2 belt diagrams.

Cheers
Sean
- Voluntary contributor.

Dec 15, 2009 | 1989 Chevrolet Corsica

1 Answer

1987 Buick Century 2.5 serpentine belt diagram


call a parts store they usually can provide you the routing for serpantine belts good luck getting it right though it can be tricky pay close attention to how the belt is routed :)

Jun 22, 2009 | 1987 Buick Century

1 Answer

How to change a water pump on a 1999 Buick Century 3100?


the water pump on the 3.1 isnt to hard to change ...
  1. Disconnect the negative battery cable.
  2. Partially drain the cooling system into a suitable container.
  3. Remove the drive belt guard.
  4. Loosen the water pump pulley bolts before removing the drive belt. This should help keep the pulley from turning as the bolts are loosened.
  5. Remove the drive belt. Remove the water pump pulley bolts and remove the pulley.
  6. Remove the water pump bolts and separate the pump from the engine front cover.

Dec 09, 2008 | 1998 Buick Century

2 Answers

All belts came off , 1986 740 gle 4 cly. with air nedd to know diagram


On the 92, the belt closest to the engine goes around the power steering pump, water pump, and crankshaft pulley.

The second belt goes around the alternator and the crankshaft pulley.

The third belt goes around the a/c and crankshaft pulley.

Jun 26, 2008 | 1991 Volvo 740

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

17 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...