Question about Ford Windstar

Open Question

I need a purge valve for a 2000 ford windstar do you know where i can get one? im in a hurry to get one please help me.

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i fix the tire alignment in a 2000 ford windstar


Take it to a shop you trust and get the car aligned you can't do it yourself because you need special tools and machines.

Dec 24, 2012 | 2000 Ford Windstar

1 Answer

P301 and P303 Code with flashing CK Engine light.


Here is a pic of the regulator
1_26_2012_10_46_44_pm.jpg

The EGR valve is under the throttle body. You could take the vacuum line off the valve and plug it just to leave the EGR valve closed. Then drive to see if you still have the problem. I don't remember where the purge valve is, but it is usually in the engine compartment at the other end of a hose that connects to the intake manifold. The other hose goes to the vapor canister. You can pull the purge line off the manifold and plug both to keep the purge vapors out. If you spot any bad hoses in the process of doing all these things, that may well be your problem.

Jan 23, 2012 | 2001 Ford Windstar

2 Answers

Where is the evap purge control valve located on a 2001 windstar


It's under the hood, looks like near the firewall in the middle.

av1372a.gif

#2 is it. Please rate if this helps

a0029544.gif

Aug 10, 2011 | Ford Windstar Cars & Trucks

2 Answers

My 2000 windstar sel threw the surpentine belt. It turns out the pully (when standing at the front of the van) located at the furthest towards the back is out of alignment. What component is this oully...


The 2000 ford windstar came with two engines, im not sure what engine you have so i will show you two diagrams and tell you what the part is for each, if you have the 3.0 engine which will say that on the valve covor then the pulley in the back would be the waterpump and the waterpump would need to be replaced but i suspect that you have the 3.8 engine because if the pulley was that loose to throw a belt then you would be leaking coolant . so the 3.8 engine has the belt tensioner in the back and this is what normally goes bad on these, you will need to replace the tensioner or just the pulley, most of the time its the tensioner which comes with a pulley, i will enclose a picture of the tensioner and see if this is the part you are talking about good luck hope this helps.johnjohn2_78.gifjohnjohn2_76.jpgjohnjohn2_79.gif

Mar 05, 2011 | 2000 Ford Windstar

1 Answer

Where is the canister located in 98 ford windstar?


there is two type of canister I didn't know which one you need so I write both.

Canister purge control valve
Need the Throttle body will have 2 bolt hold it in place
and two vacuum line.

Evaporative Emission Control Canister
next to the fuel tank.
left-hand fame side rail

let me know

Sep 21, 2009 | 1998 Ford Windstar

1 Answer

Ford Windstar


need to see if u have fuel and spark... if u do then lock drivers door with key wait for maybe 3 min then unlock door with key... then try to start also check fuel pressure

Jun 25, 2009 | 2000 Ford Windstar

1 Answer

Can't find where the red Plastic Tube, in Windstar 2000, fits.


the red tube goes into upper coweling amost directly above the the left corner of engine ,it is hard to get on,use mirror or small hands. below fresh air grill and wipers.almost straight up from where it originates on engine.

Dec 23, 2008 | 2000 Ford Windstar

1 Answer

2000 focus


i know where you can find the solution,try this webpages: http://ca.geocities.com/man_from_da_bush/windstar.html good luck

Oct 25, 2008 | 2000 Ford Focus

2 Answers

Ford Windstar oil leak


Most possible oil leaks from valve cover rubber oil seal. Remove valve cover, inspect , clean surfaces, and replace with new rubber oil seal .
Good luck!
Thanks for using fixya.

Oct 19, 2008 | 2000 Ford Windstar

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...