Question about Dodge Cargo

Open Question

Wiring for the edge 9000 - Cargo Dodge Cars & Trucks

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 96 saab 9000 and my turn signal stoped working


As a first step, check the fuses,light bulbs, relays, if everything good, check for any broken wire.

Jan 25, 2013 | 1997 Saab 9000

1 Answer

Unti lock on all time. sensors cleaned.


Maybe the anti lock brake ecu is bad or the sensors need to be replaced on the appropriate wheel as indicated by fault codes for the ABS system.

Fault codes were not provided on the original 1989 model of the Saab 9000, but the 1990 to 1991 model ecu can be installed and fault codes read from the AntiLock warning lIght flashing codes.

Check wiring to ensure there are no opens to the module from the ABS Wheel Speed Sensors.

Maybe check that the wheel speed sensor is picking up a sinusoidal wave of AC electricity when the wheel is spun as seen on an oscilloscope function of a multimeter. This would isolate the problem to wiring or the ECU being at fault.

Oct 29, 2010 | 1989 Saab 9000

3 Answers

1997 saab 9000 cse fuel pump location and how to install new pump.


It is in the fuel tank $101.99 at Autozone. E8077 is the part number. You must drop the tank to install. Same pump for 4 or 6 Cyl.

Jan 09, 2010 | 1997 Saab 9000

1 Answer

How do i polarize alternator after new regulator saab9000 1989?


You dont. Alternators DO NOT require polarisation as they can only be fitted to vehicles that are wired as NEGATIVE EARTH. If you have replaced the Alt, reconnect the wiring, reconnect the battery - Positive lead first then the negative lead, then start the motor !! Using multimeter, check the charge rate at the battery. It should be around 13.8 volts. The charge rate SHOULD NOT go above 14.7 volts and if it does, turn the motor off immediately and recheck the connections, especially any battery voltage sensing wires. if nothing appears to be wrong, contact an auto electrician and have them check things out. I have known faulty regulators, even in new Alternators..

Dec 27, 2009 | 1989 Saab 9000

1 Answer

Looking for a color coded radio harness diagram for a saab 9000 cs. got one from 12volt. it was incorrect. the harness was spliced. i just need the color code for the wires.


1994 Saab 9000 Series Stereo Wiring Constant 12V+ White/Blue Switched 12V+ Yellow/Red Ground Black Illumination Brown/White Dimmer n/a Antenna Trigger Green Antenna Left Rear Front Speakers 6 1/2" Side Panels Left Front (+) Blue/Green Left Front (-) Gray/Black Right Front (+) Red/Green Right Front (-) Brown/Black Rear Speakers 6 1/2" Rear Deck Left Rear (+) Blue/Yellow Left Rear (-) Gray/White Right Rear (+) Red/Yellow Right Rear (-) Brown/White

Dec 25, 2009 | 1994 Saab 9000

2 Answers

Sppedometer stopped working in my 1990 saab 9000 s 5 speed how do i fix it


very likely it is the speedo sending unit on the transmission, I would ck wiring also

May 05, 2009 | 1990 Saab 9000

1 Answer

Traction control system 93 saab 9000 turbo


I don't have a source, but this guy might be able to help.

Feb 16, 2009 | 1993 Saab 9000 Hatchback

1 Answer

Brake lights don't work


it could be a faulty brake switch.

it is located at the brake pedal. the brake pedal itself is the one pushing the brake switch to turn it off. it is a normally closed switch.

tnx 4 using fixya,

drcool

Sep 22, 2008 | 1986 Saab 9000

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6918 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...