Question about GMC C1500

Open Question

I have a loose hose and i think it might be the hose that controls the rpm does anyone know where that goes attached to? i think it is the rpm hose cause my rpm does not move.

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why is my check transmission light coming on?

check transmission fluid for the proper level.

May 27, 2013 | 2006 Ford Taurus

1 Answer

Engine overheat purge tub?

yeah you are right it is for that only but it is used for the over spilling of coolant. It is called overflow hose. Let me know if you need any detail explanation on this. .

Increase Engine Horsepower

Jun 05, 2012 | 1997 Mercury Sable

1 Answer

Idle needle goes up but will not return under 3000 rpm,even when stopped.

does it do this all the time or after you drive it for a little while? if it does it all the time then id say you have a vacuum leak somewhere. has there been anyone under your hood recently to where they might have accidently knocked a hose loose? thats what it sounds like to me. thats where id start. just check all the hoses under your hood and if you find one not hooked up anywhere then id say thatd be it.

Mar 28, 2010 | 2008 Saab 9-3

1 Answer

1996 Buick Century vacuum problem

Well doesn't matter what it's called.If it is loose and soft then you can take it off and get a new piece of hose from your local parts store.Unless it is a formed hose you will have no problem getting a replacement.You may want to check all other vacume lines as over time they will either get soft and **** shut or dry crack and leak.Any vacume leek will cause problems.Well hope this helps,and good luck.

Mar 14, 2010 | 1996 Buick Century

1 Answer

Rpm problem

Check for vacuum leaks. Split hose or pipe coming from or to the inlet manifold.And don't just look at them get in there with your hands and feel all around the hoses checking for splits cracks loose clamps .....
Let me know how you get on.

Jun 28, 2009 | 2003 Mitsubishi Lancer

3 Answers

Poor acceleration while trying to pass and check engine light on

Your loose hose from the EGR might plug into the back side of the throttle body...I'm not sure of the 3.4 liter setup.

Apr 23, 2009 | 1991 Pontiac Grand Prix

2 Answers

96 cherokee rpm's drop when going back in park almost stalls out

Check for cracked vacuum hoses in your engine bay. Especially on your intake manifold.

Apr 12, 2009 | 1991 Jeep Cherokee Briarwood

3 Answers

Mitsubishi idling problem!!??

Am not shure the kind of engin you really have but see if your stepping mottor is damage or need relpacing. that problem can happen if you have a faulty unit . it also called the step up unit or sensor, if your car have air condition is turned on and the rpm goes up and down that can be the problem , the unit can be found attached to the throttle body. just below.

Mar 07, 2009 | 2002 Mitsubishi Lancer

1 Answer

Hose that attaches to back of thermostat housing is leaking

The hose is a cooling by-pass hose. It makes a big horseshoe and attaches under the front of the intake maniold. I think that if you have small hands and a lot of patience you can likely replace it without haveing to take half the engine apart. (You have to pull the head to pull the intake manifold).
I think if you remove the battery, and have a small bright light you will be able to see where if attaches under the front of the intake manifold. Advance auto sells the by -pass hose for
around $12.00 I think.

Becare if you are probing around there are way too many vaccum lines under the manifold.
If they come off and you don't know where to put them -- you are in deep kim chee. I know I am
in super deep Kim chee now.

Hope this helps

Nov 21, 2008 | 1990 Isuzu Trooper

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts


Level 3 Expert

76164 Answers


Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides