Question about 2006 Renault Le Car

Open Question

Engine light keeps coming up on the dash, taken it back on several times to garage only to be told its a manufacturing problem??? is this the case?

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I management light keeps coming on in my audi tt although i have replaced several parts

Usually when you go to any Audi garage, they will plug a computer to your car to diagnose the problems. You should get a list of what should be done on your car. sometimes after changing the fault part you can still have a light management on, in that case they'll have to reset the default log of the car.

Aug 31, 2016 | 2003 Audi TT

1 Answer

K I need help guys & gals...I have another pece of S**t Ford. It's a 2006 Ford Focus - just did a entire new clutch, flywheel, and one drive axle. I get my car back spent $1722 with rental and tow

Hi Jenny, Sorry to hear your distress! When the check engine light comes on it generates a fault code, this will assist in pointing a mechanic in the right direction of where the fault is! You cannot just reset the light and hope the fault disappears! The garage that did the work needs to find the reason the light is on and put the fault right since it is their responsibility to give the car back with no lights on the dash!

Dec 31, 2014 | 2006 Ford Focus ZX4

1 Answer

We bought a Hyundai tuscon 2006 from a Ford Dealer recently. an amber engine light keeps coming up the garage have taken it back and sorted but this has happened four times in the last 3 months. warranty...

take your car to auto zone or any parts store that will run the check engine light test for free. See if they can pull a code telling you what is causing the light to come on.if there is no code no one can tell whats wrong until it reappers if this is helpful please leave good feed back

Nov 20, 2014 | Hyundai Tucson Cars & Trucks

1 Answer

Fuel Emissions light that appears on the dash intermittently.

The fuel emission light operates from several sensor that if one is out of parameters tells the CPU that the air fuel ratio is incorrect and so the light comes on. IT may be a MAP/MAF/VAF sensor or a ambient air temperature sensor that is not reporting correctly. Have the fault codes read and see what has been recorded and work from there. The engine will operate alright but there may be a slight decrease in economy that you would not notice unless you record the fuel consumption manually.

Feb 15, 2014 | Holden Barina Cars & Trucks

1 Answer

The malfunction indicator light came on about a month ago in my Suzuki Alto (2005) and I took it to the garage and was told there was a misfire in cylinder 2. I was told it was fine so they reset the light...

If the code has been a misfire in the same cylinder every time, the problem is very likely the ignition coil for that cylinder. When the ignition coil first starts to go, the malfunctions will be sporadic and therefore difficult to troubleshoot. The ignition coil can be tested for resistance on both primary and secondary windings in the coil to prove it is failing.

Oct 30, 2013 | Suzuki Alto Cars & Trucks

1 Answer

I have taken away the cats on my SL 55 AMG 2002 mod. How to get rid of the yellows engine light on dash. It keeps coming back after reeset.

Put the catalytic converters back on. The engine computer needs to see the O2 sensors working to keep the light off.

Sep 26, 2012 | Mercedes-Benz SL55 Amg Cars & Trucks

1 Answer

"Service 4WD" dash light comes

Sounds like a defective electronic shift motor for the transfer case. The diff and t-case fluids should be replaced every 30K but will never turn on serv 4wd light.

Feb 20, 2011 | Dodge Dakota Cars & Trucks

1 Answer

I have a 2004 CTS. While backing out of the garage the engine felt like it was running on 2 cylinders then the engine light started flashing. I took it to a garage I always use and they ran diags and told...

If the check engine light is still on, take it over to autozone where they can pull code's out of it for free, and get back with us here at FixYa so we can help you with your trouble code, if the light is off and it's now running fine don't take it there because every thing will check out good, the light has to be on to test, if it's running fine wait till light come's back on, if it does.

Jul 02, 2010 | 2004 Cadillac CTS

1 Answer

Intermittent electrical fault Saab 9-5

Check connectors,pins grimping force,bad contact between pins in main plug connector(abs unit)or connectors near pilar A left.
Good luck!

Sep 29, 2009 | 2000 Saab 9-3 Viggen

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

15 people viewed this question

Ask a Question

Usually answered in minutes!

Top Renault Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

xxxxxx xxx

Level 3 Expert

4861 Answers


Level 3 Expert

76109 Answers

Are you a Renault Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides