Question about 1999 Ford Crown Victoria

1 Answer

Crown vic thermastat housing cracker,can i just replace housing or whole intake

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 118 Answers

The all-black-plastic manifolds are susceptible to cracking. You should inspect the manifold carefully for cracks, but it might be hard to see if it is cracked underneath. You could try replacing just the thermostat housing, but if you still get leaks, you will probably need to replace the manifold as well. Ford recalled some fleet cars for this issue, but not all cars affected.

Posted on Aug 24, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a 2003 crown Vic just put a intake on it now it went crank what do I do


You send it off to the promised land. You can buy a working crown Vic for the same price a repair will cost you.

Feb 09, 2015 | 2003 Ford Crown Victoria

1 Answer

How do i fix intake when thermastat housing screw eye broke off


its possible to drill out the broken part and use a extractor to remove the piece or drill out the hole and install a heli coil of the right size.

Aug 21, 2014 | Cars & Trucks

3 Answers

I took a 01 ford f 150 triton engine and put it in a 97 ford crown victoria and switched all the components over but it's not running right it stall on acceleration then pick up speed I did not switch the...


Yes. You need the ecu that came with that engine. Did you switch intakes? The f 150 4.6 has a taller intake and I believe the stroke is different. I would switch the throttle position sensor too.

Jul 31, 2014 | Cars & Trucks

1 Answer

My 2002 crown vic is misfiring and the check engine light flashes when speeds of over twenty miles of hour are reached. Is it safe to drive. How can I fix this


you can drive it but it will damage your catalyst system, that is why the klight flashes to let you know other problems can develop. the car being a 2002 it has a misfire monitor in the computer. go to a local parts house and have them scan for misfire codes to see which cylinder is misfiring. make sure you check the intake at the #5 cylinder (which is the first one on the left side of the engine)to see if it is getting coolant in it from the intake leaking at the thermostat housing.

Jul 30, 2011 | 2000 Ford Crown Victoria

1 Answer

92 crown vic - temperature guage on the dash is not working...


0900c152801e4775.gif

The temperature gauge sending unit is located in the front section of the intake manifold, just to the right of the alternator on the 4.6L engines. Got this from autozones repair manuals


Mar 16, 2010 | 1992 Ford Crown Victoria

2 Answers

I had my intake manifold replace and my car started up then less tham 30 seconds my whole car shutoff. i found water in my oil pan drained it and replace all fluies and it still won't start up


water in oil pan? try taking out the spark plugs and turning car over. Is there coolant/water coming out? If so you need Head gaskets or intake gaskets weren't done properly. If this problem wasn't there before gaskets were done I'ld strongly suggest looking at intake gaskets again.

Jan 27, 2010 | 1999 Ford Crown Victoria

1 Answer

1992 crown vic with 78K miles. Started skipping


Replace you Maf sensor and have a nice day. lol does the hesitation go away when you let off the gas. does it buck hesitate and misfire under load? most common problem is the maf sesnor.
easy to change. don't buy a used part it may develop the same problem after a little while. you can try cleaning the wire inside with brake cleaner (not intake cleaner). it may or may not help.

Jun 26, 2009 | 1992 Ford Crown Victoria

1 Answer

I have a crown vic police interceptor 1997 4.6 it s running hot


These are notorius for cracking the intake m anifolds, they are plactic, just had one in the shop a week ago, look around the thermastat housing for cracks, I hope this helps you

Dec 18, 2008 | 1996 Ford Crown Victoria

1 Answer

2003 cvpi wing mirror


first of all if you have the new mirror off of a crown vic or grand marquise there is nothing to worry about wiring because you have to take the door panel off and once off all you have to do is plug in the new mirror the same way you took the old one off

Aug 14, 2008 | 2003 Ford Crown Victoria

Not finding what you are looking for?
1999 Ford Crown Victoria Logo

Related Topics:

118 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5470 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...