Question about 2004 Hyundai Tiburon

2 Answers

Low bean headlights don't work but high beam does on 2004 Hyundai Tiburon. How do you know what the problem is.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 54 Answers

Check fuse box in engine bay (should be near battery) inside should be the fuse for high beam and low beam.

Posted on Sep 18, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem, and I already checked the fuses, someone told me that it could be the dimmer switch

Posted on Dec 25, 2012

  • Antonio Jaramillo Dec 25, 2012

    I have the same problem, and I already checked the fuses, someone told me that it could be the dimmer switch

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hyundai tiburon 08 headlight dead, kills every replacement bulb. right headlight still works.


sounds like a bad earth, check the earth connection, if poss take it

off and clean it, bit of WD 40 to keep rust and moisture out

Oct 27, 2014 | Hyundai Tiburon Cars & Trucks

1 Answer

Both low bean headlights do not turn on high beams


Replace Relay #46 in the underhood fuse panel.

Aug 25, 2010 | 2003 GMC Envoy

1 Answer

My passenger side low beam headlight is out. the driver side low beam headlight works fine. I replaced the bulb and the headlight still doesn't work. What should I look at next?


Check the fuse. There are seperate fuses for right and left. You dont mention if the high beam works for that side? If it does, the fuse is good. The GREEN wire at the bulb is the ground for the low beam. If that wire has power, then the ground is bad. If the high beam works, the hi'lo beam switch is good, and there is a problem between that headlight and the Engine Compartment Junction Block

Dec 16, 2009 | 2004 Hyundai Santa Fe

1 Answer

Passenger low bean headlight doesn't work. The


You will need to provide what year car, engine size, ect so a diagram can be found to help you.

Dec 16, 2009 | Hyundai Sonata Cars & Trucks

1 Answer

Headlight low beans don't work. High beams do


check your fuse box on the inside is a diagram of all fuses check the one that says low beams could be blown

Dec 12, 2009 | 2005 Chrysler Sebring Conv

2 Answers

Which is the high beam which is the low beam on a 2003 Hyundai Tiburon?


The low beam is always on the outside, and the high beam is always closer to the grill...

Dec 04, 2009 | 2003 Hyundai Tiburon

1 Answer

HOW DO I ADJUST THE LOW BEAM HEADLIGHTS TO SHINE


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Oct 06, 2009 | 2001 Hyundai Tiburon

1 Answer

Changing the headlights


This picture shows the rear side of the headlamp assembly. I've circled the access caps to the high & low beam bulbs (they just twist off (counter-clockwise) to access the bulbs. Depending on which engine is in your Tiburon, access is easier if you remove three 10mm mounting bolts to the headlamp assemblies and remove the entire headlamp assemblies (see illustration)
c173c7f.jpg You'll want to disconnect these two connectors .. then remember to reconnect them when you put the assemblies back on.

Hope this helps

Dec 20, 2008 | 2004 Hyundai Tiburon

Not finding what you are looking for?
2004 Hyundai Tiburon Logo

652 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...