Question about 2000 Chevrolet Blazer
The Owner's Manual tells you to NEVER 'pump' the gas pedal, but to s l o w l y ease it to about halfway. Remember its electronically fuel injected, Ace. Sometimes on a hot day it gets overloaded and needs more air.
The cold start sequence involves turning on the switch, then allowing the fuel pump to build up proper pressure.
Posted on Nov 26, 2010
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
hi everything is easy if you know what you are doing and have the right equipment so have you got lifting gear have you got a good selection of tools and will need a little help getting the engine in and out otherwise you will struggle and you need to be inside with plenty of space good luck, yates210456
Posted on Oct 26, 2008
SOURCE: 2000 Chevy Blazer
i am working on a s 10 of the same yaer and problem i will post my results after tomorrow when i have finished the job i bout this truck cause of the forum i own one that is a great one and this one is for experimental purpose i will let u know so far you cant lift the motor with a jack or a hoist so we r going another route in the mornin
Posted on Dec 27, 2008
if it does not start after you check your distributor cap that means you took the car out of timing, when you put the distributor cap back on you did not put it is the correct position, now you need a mechanic to get the timing of the engine
Posted on Jun 26, 2009
Since the 2000 chevy blazer is equipped with SRS (Saftey Restraint System), ie: Airbags, which is located in the steering wheel. In order to replace the turn signal switch you must remove the steering wheel. Therefore I would only highly advise you to take it to a dealer to have this done.
Posted on Oct 07, 2009
With a good shop manual, a transmission isn't hard to do. The biggest concern of a backyard transmission swap is man handling the transmission up and down. If you have the ability to get your blazer up on jack stands, and have access to a transmission jack, you should be good to go. I recommend a subscription to : www.alldatadiy.com
For about $20, you will have a good guide for the job.
Posted on Nov 24, 2009
Tips for a great answer:
Sep 09, 2014 | 2000 Chevrolet Blazer
Jun 28, 2011 | 2000 Chevrolet Blazer
Jun 01, 2010 | 2000 Chevrolet Blazer
Feb 15, 2010 | 2000 Chevrolet Blazer
Dec 11, 2009 | 2000 Chevrolet Blazer
Nov 29, 2009 | 2000 Chevrolet Blazer
Sep 20, 2009 | 2000 Chevrolet Blazer
Jul 14, 2009 | 2000 Chevrolet Blazer
Jun 26, 2009 | 2000 Chevrolet Blazer
Oct 17, 2008 | 1998 Chevrolet Blazer
561 people viewed this question
Usually answered in minutes!