Question about 2000 Jeep Grand Cherokee

1 Answer

2000 jeep grand cheroke liminted changed window motor changed switch still window only goes down only can not get it to go up from front door or back door

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,297 Answers

Therefore you have an open in your wires from the switch to the motor

the most likely location is in the door jam

finding opens are very difficult if you do not see any obvious chaffs or damage

depending on your experience and tools, you may have to seek help of a garage

Posted on Aug 24, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gas door open warning light on 2013 jeep grand cheroke


its under warranty, right?
but it open, or the switch wires are cut.
test the switch, examine the wires. or
read the FSM, on topic,

Jan 12, 2014 | 2000 Jeep Grand Cherokee

1 Answer

All of the sudden, the windows on the passenger side (front & back) of my 96 Jeep Gr. Cheroke Limited will not go down with the power button. ??? up with that?


it might sound strange but i seen this happen, make sure u didnt hit the window lock button, but that my just be a blown fuse.

Sep 30, 2010 | 1996 Jeep Grand Cherokee

1 Answer

No tail lights....


check fuses. or the switch behind the break pedal. good luck. joyj35@live.com

Feb 12, 2010 | 2000 Jeep Grand Cherokee

1 Answer

The heater stop working and i dont know what it could be? its a jeep gran cheroke 2000


If you're getting air blowing, but it's just cold, and you have the auto temp controls, you probably have broken blend doors. Do a search for "Jeep Blend Doors" and I'm sure You'll find pleanty of info. Also google "Heater Treater" for a fix.

If your not getting any air, you may have a burned out connection going to the blower control module. This happened to me. Under the dash on the passenger side, next to the door, you'll see the blower motor. Trace the power lines coming out of it, and trace them back to the control module. Unscrew the two screws from the control module and drop it down. Now unplug the motor power lines from the controller and look for a melted connector. This is a known issue with Jeep. They sell a repair kit that you use to wire in new, thicker gage wires into a new connector. Check out this site for more info: http://www.wjjeeps.com/blower_motor.htm

Jan 08, 2010 | 2000 Jeep Grand Cherokee

2 Answers

Passenger window is locked and will not roll down , is there a switch under the steering wheel ????


no there is no switch under the steering wheel. if the window no longer goes down from either switch then you have a bad window motor or a bad master switch in the drivers door

Jan 02, 2010 | 2000 Dodge Grand Caravan

1 Answer

Power window systems failing in past few months. 3 of 4 now dead.


before spending alot of money on windows motors, try to take out the switch in the door handle and spray contact cleaner in the switch.. sometimes if you use alot of armor all on the door panels it will work its way into the switch and make it dirty.

Aug 14, 2009 | 1999 Jeep Grand Cherokee

1 Answer

Windows will not roll down after I have repaired the wire that goes from the master switch to the relay. I also have replaced the Master switch and I windows still will not work.


Check for power and ground at the motor (with switch up and down, powers and ground will reverse). If you have power and ground, at the motor, you probably have a faulty motor. If you don't, then there is probably a break in a wire, usually where the harness passes through in the door jamb. Actually first after removing the interior door trim, try to roll down the window while tapping on the motor with a small hammer. If it works, replace the motor.

Aug 02, 2009 | 2000 Jeep Grand Cherokee

1 Answer

Power windows and rear doorlock wont work 1994 jeep grand cheroke


check the wiring between the door and the body on the drivers side....there was a problem with it breaking

Jan 26, 2009 | 1996 Jeep Grand Cherokee

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

74945 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7697 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...