Question about 2000 Hyundai Elantra

2 Answers

How to add transmission oil - 2000 Hyundai Elantra

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 270 Answers

Hi my Name is David, I'll be assissing you today.

#1) To add Transmission Fluid, Open your Hood.

#2) Locate your Dipstick Labeled Transmission Fluid, Its just like how you check your Engine Oil.

#3) Only difference is you ADD your Transmission Fluid in the Tube that you check your Transmission Level.

#4) You'll need a Funnel with a Long Plastic hose ,that will fit in the Transmission Tube.

#5) Before adding any Transmission Fluid, Start your engine let it get to normal operating Temperture, then pull out the Transmission Fluid dipstick,Wipe it Clean with a Paper Towell or Rag.

#6) Then slide the Dipstick back in the Tube all the way down, And pull it out and bring the dipstick up Level , and see if your fluid is on the Dipstick.

#7) you'll see at the end of the dipstick where it shows you if your Fluid Level is Low or if its up to the Full Line on the Dipstick.Which is where it needs to be AT the Full Mark.At Operating Temperture.

This will get your Transmission Fluid level where it Should Be.

NOTE: Do NOT OverFill it past the FULL Line on Your Dipstick.

Thank you for using FixYa Please let me know how my Solution and Instructions has helped you by Voting for me.Thanks Again:

From: d_hubbs

Posted on Aug 23, 2010

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 137 Answers

Small bolt at the side of the gearbox, you need to remove it and use a long hose to feed the oil into the box.

Posted on Aug 23, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where do you check the transmission level on a 1995 Polaris 425 Magnum. How do you add fluid?


on any vehicle with an automatic transmission, there are two dip sticks. One to measure oil level, and the other transmission fluid level( typically labled 'check with engine running in park'). To add transmission fluid requires a funnel to introduce fluid via the dip-stick tube.

If you have a manual transmission, then you don't need transmission fluid, you need gear oil, which can be measured at the transmission and added at the same port.

Mar 06, 2015 | Cars & Trucks

1 Answer

How to put transmission oil in a 2001 Audi A6


Remove the transmission oil filter and you can add the oil through there using a long funnel or funnel that has a plastic tube long enough to reach. Add the oil slowly to keep from overflowing and make sure you add the exact amount that you removed.

Oct 14, 2014 | 2001 Audi A6

1 Answer

FILLING TRANSMISSION OIL ON A 1996 SUNFIRE


add it to the TRANSMISSION (red) dip stick tube. check on level ground traney hot in park while running.

Apr 16, 2013 | Cars & Trucks

1 Answer

How many qts of oil do i need


Depends on your engine.

1980 JEEP CJ-7 2.5L 4-cyl Engine Code [B]
CAPACITIES
Engine, GM without filter..........2.4 quarts[1]
Wix Filter ........ 51040
Cooling System, Initial Fill..........8.0 quarts
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A999, 32RH..........8.4 quarts
3 speed A904, 30RH..........7.0 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Oil Drain Plug.....25 ft-lbs
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

1980 JEEP CJ-7 4.2L 6-cyl Engine Code [C]
CAPACITIES
Engine, without filter..........5.0 quarts[1]
Wix Filter..... 51522
Cooling System, Initial Fill..........11.0 quarts
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A999, 32RH..........8.4 quarts
3 speed A904, 30RH..........7.0 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Oil Drain Plug.....30 ft-lbs
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

1980 JEEP CJ-7 5.0L 8-cyl Engine Code [H]
CAPACITIES

Engine, without filter..........4.0 quarts[1]
Wix Filter..... 51258
Cooling System, Initial Fill..........13.0 quarts
Automatic Transmission, A999, 32RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, A904, 30RH Initial Fill..........4.0 quarts[2]
Automatic Transmission, Total Fill
3 speed A904, 30RH..........7.0 quarts
3 speed A999, 32RH..........8.4 quarts
Manual Transmission, 4-SPD, SR-4..........3.0 pints
Manual Transmission, 4-SPD, T176..........3.6 pints
Differential, Front..........2.5 pints[3]
Differential, Rear..........4.9 pints
Transfer Case,..........4.0 pints

1. Add extra oil when replacing filter. After refill check oil level.
2. With engine automatic transmission operating temperature, shift through all gears.
Check fluid level in NEUTRAL and add fluid as needed.
3. 1984-1992 Models with command-Track, add 5 oz of 75W-90 GL-5 to shift motor housing opening.

TORQUES
Manual Transmission T176
Fill Plug.....15 ft-lbs
Drain Plug.....15 ft-lbs
Manual Transmission SR4
Fill Plug.....20 ft-lbs

Oilman

Feb 02, 2013 | 1984 Jeep CJ7

1 Answer

Trying to find the exact location on my car to add my transmission fluid i have automatic 2007 suzuki frenza my chek engine light is on


Open up your bonnet and look at the very back of the engine and you should see a long tube with a colored handle sticking out, also the check engine light can also be the engine oil so on either side of the engine you should see the same thing as the transmission handle. Its best to check both the transmission & engine oil/fluid by pull out each one by one when the engine is off and cold then get a rag and wipe off the oil/fluid on the longs metal sticks and putting them back in & out to see how much oil/fluid they have.
On both sticks they have a add more & max level lines so if the oil/fluid is on the add more line, add more oil/fluid to them to get it on the max line.
Remeber that the transmission oil/fluid goes to the back stick behind the motor and the motor oil/fluid goes to the side one. Good luck.

Jul 29, 2011 | 2007 Suzuki Forenza Sedan

2 Answers

Where does the transmission oil go


If your car has a manual transmission , there won't be a dipstick or filler tube. Oil (fluid) is added through a plug on the top or side of transmission , depending on your vehicle make or model

Sep 22, 2009 | Cars & Trucks

1 Answer

How do i add gear oil to my transmission


You do not add gear oil to your transmission, you add transmission fluid through the dipstick tube.

May 18, 2009 | 1992 Honda Accord

2 Answers

How do you add transmission fluid?


If this is for a 2002 and up explorer with the 4.6, there isn't a dipstick. It is a complicated deal. The vehicle has to be running much like the old ones, but a plug must be removed from the pan. Behind the plug is a upwards tube that you, believe it or not, squirt oil up into until it runs generously back at you. then it is full.

Crazy huh?

Nov 25, 2008 | 2004 Ford Explorer

2 Answers

Add transmission fluid


On 91 vehicles there's a 17mm allen screw on the side towards the left front wheel. Open it add the oil there on a level surface and fill till oil reaches the hole and starts coming out. DO NOT FILL OIL FROM THE TOP where what seems to be a plug. It's actually the timing marks and houses the clutch. Put oil there and you'll need a new clutch.

Nov 01, 2008 | 1991 Volkswagen Jetta

1 Answer

CHANGING THE FLUID


2000 Chev Malibu 3.1 L checking the transmission oil level is a must since there is no dipstick to check the oil level with. The MOTOR oil is hot to change the oil in the motor. Driving the car up on ramps alters the level a bit as does the trans fluid at 200 degrees instead of the recommended 100 degrees. Let the car idle while you slide cardboard, newspaper, a flex socket wrench with a deep 7/16 inch six point socket. Set both the Park at the transmission gear selector and the parking brake, and put blocks behind and in front of the rear tires before you climb underneath the car. Cars roll off of jacks, ramps and whatever enables mechanics to get underneath. Before changing the motor oil while the engine is at a slow idle, using a six point 7/16 wrench turn the plug on the passenger side of the transmission counter clockwise looking down at the top of the bolt/inspection plug. If oil runs out put the plug right back in. If not add about four ounces at a time.
To add fluid, remove the red add fluid cap is on top of the chain/side cover which is underneath the exhaust crossover in front of the air valve. I used a turkey baster with the bulb removed and used a funnel into the baster which I placed into the add fluid hole after removing the red add fluid cap. While it is a better to have one person adding fluid while the other is underneath yelling stop when the fluid starts to run out of the inspection hole, I added 4 oz at a time and may have a slightly overfilled transmission. Although the car is not level, if you have fluid at normal operation temperature, the expansion of the fluid will compensate for the overfill due to the rear of the car being lower than the front.
After removing the motor oil and filter, spray some engine degreaser on the side of the motor and transmission to remove dirt and to make finding future leaks and pinpoint their location.
If you do not have a leak and are not losing transmission fluid the time to check the fluid level adds less than five minutes to your oil change. If you have to remove the fill plug and add fluid after finding or buying Dextron III transmission oil, you may add 15 - 30 minutes to the oil change.
The exhaust crossover pipe is several hundred degrees even at idle. A bright flashlight is helpful to find leaks when lying on the ground underneath the car and oil pans.

Jun 02, 2008 | 1983 Chevrolet Malibu

Not finding what you are looking for?
2000 Hyundai Elantra Logo

565 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8210 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...