Question about 1996 Chrysler Cirrus

1 Answer

1st, temprature guage shoots up whenever I am going down hill for a long period of time (not neccissarily a long hill) 2nd, most of the dash guages don't turn on until the car has been running for a little while. 3rd, radio display is on very seldomly.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 11,800 Answers

1 - you have air in the cooling system, purge it by putting the car uphill,take the cap off the radiator, open the heater and run the engine until all the air leaks out.
2 - bad contact in the wiring of the instrument panel - you need to take it out of the dash to inspect and fix it.
3 - again a bad contact, surely related to the one above; when fixing the dash also take a look at the wiring to the radio.

Posted on Aug 23, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1st and 2nd gear wont engage but if you roll the car down hill, wonce it gets up to speed it will kick into 3rd and 4th just fine. whats broke?


is it auto or manuel have you tried topping up the gear box oil it sounds to me as if there is not enough in it when you go down hill the oil is going to the sender unit in the box thats if its an auto which in turn lets the gears change

Jun 12, 2014 | 1993 Mercedes-Benz 190

1 Answer

Transmisson slips in third and drive


Sounds like the transmission is done. Time for a rebuild/replace.

Feb 08, 2014 | 2003 Chevrolet TrailBlazer

1 Answer

2008 Element. Runs like a charm, just had its BIG tuneup done this spring (tires, timing belt, etc). Makes a VERY intermittent high-pitched whine. Doesn't seem connected to anything-not just when cold,...


still bad? doing old zero answer posts. (my bag)
finding noise is hard, and takes skills and can be dangerous.
my guess ????? it makes noise only moving.????
only clue is front, and presume outside of car and not under dash.

if car makes noise moving only, it can be dangerous , driving or even trouble shooting.
does it make noise in turns, or bumps,or loads (hills) or in all gears. or down hill, or coasting.?????
when it starts, does letting of throttle stop it, or more throttle>
or down shifting.? or cutting throttle and shifting to neutral.
I added many check to Doesn't seem connected to anything

my guess is the whine will progress to full time, many times this is true.

good FSM cover noise, here is more.
(tools can do wonders.)
http://www.fixkick.com/NOISE.html

Sep 10, 2013 | Honda Element Cars & Trucks

1 Answer

Vw jetta automatic not reading park or 1st gears on dash


is a mechanical linkage or electic indacator if it linkage just adjust it ot take it to transmision shop they can adjust it for you

Nov 28, 2012 | 1996 Volkswagen Jetta

1 Answer

Guages on 87 rx7 gxl dont work


I'll help with the brake lights. 1st check fuse, 2nd there is a brake light switch located at the brake pedal you will need to get under the dash & find it. Remove plug from switch & bridge plug with wire If the lights come on the switch is faulty (have the ignition on while doing this) 3rd check brake globes it is possible all are blown.

Jul 05, 2012 | Mazda Cars & Trucks

1 Answer

1989 Dodge Aries Overheating


How about a temperature sensor? If it's faulty it could be sending the wrong messages to your computer and your dash light.

Jan 27, 2010 | 1989 Dodge Aries

1 Answer

Desciption of the gear positions on the automatic gear shift


The gearbox normally shifts like this in "D":

1st gear to 2nd gear

2nd gear to 3rd gear

3rd gear to OverDrive

If you have the selector in "2", it will not make the final 2 shifts. "2" is nice for descending very steepo hills slowly, and also is nice to use coming down hills when it is icy/snowy, the engine will slow down in "2", and you will not have to depress the brake pedal.

Apr 09, 2009 | 1996 Toyota RAV4

1 Answer

Mazda Sentia 929 auto failure


Rebuilt gearbox probably... unfortunately!
If the HOLD light in the in strument cluster is flashing at you, it is giving you a transmission diagnostic code (like a kind of Morse Code). A transmission specialist or a Mazda Dealer will be able to read this code and plug their computer into the cars computer, and tell you what is wrong.

Feb 28, 2009 | 1993 Mazda 929

2 Answers

Ford Falcon 1995 Auto Problem


have you checked the transmission fluid? if it is low can cause this. if not then it is an internal problem in transmission.

Dec 12, 2008 | 2004 Chevrolet TrailBlazer

1 Answer

2000 Camry won't shift out of 1st gear


Check all your fuses. The ones in the car. and check if there is some under the hood.

Nov 22, 2008 | 2000 Toyota Camry

Not finding what you are looking for?
1996 Chrysler Cirrus Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...