Question about 2002 Chrysler PT Cruiser

1 Answer

There are lights in the rear below the tail lights. What are they called?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 137 Answers

Fog lights

Posted on Aug 24, 2010

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
  • 288 Answers

SOURCE: tail light fuse keeps blowing,making

MY 1997 NISSAN BOOK DOES NOT LIST A PRIMERA. DOES IT HAVE ANY OTHER NAME ON THE VEHICLE ????????????

Posted on Jan 25, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2010 Subaru Outback tail lights are not working. What do I need to do?


This is odd.. I take it your front parking lights are working? The reason why I ask is that they are on the same circuit as the rear tail lamps usually. If both front and rears aren't working, check the fuse. If the fuse is good, replace the relay. If only the rears aren't working, check the ground wire for the rear wiring harness to the rear lights. This is still odd as your other lamps usually use the same ground point. Finally, if you aren't the first owner or you recently replaced the bulbs.. did you use the proper bulbs? Some bulbs have two filaments called 21/5 Watters. Some vehicles use special connectors for the bulbs that be inserted in either orientation, but will only work both filaments when inserted properly. Try reversing the lamps inside the connectors, one at a time please between tests.

Apr 10, 2015 | 2010 Subaru Outback

2 Answers

I have a 2003 suzuki xl7 what causes the tail lights not to work when ive checked the bulbs and fuses and they are good


it can only be 3 things, blown fuse, (test them not gander)
open circuit or short circuit.
are you saying park running lights are dead, aka, TAIL.
are the park lights working up front, ? and on dash?
1st click of head light switch is park. that is dead,at all lamp inside and outside of car?
02 xl7 (usa car answers, we do, here, as it is a USA forum)

this car has a BCM, body brain.
and it runs most things, we scan it first to see if IT has issues.
called DTCs.
when you select TAIL, at switch this is a digital input to BCM
true (0v = true) signal tells BCM you want tail/ parks on.

it (BCM) then closes relay 23 (seen below) park/tail relay
if the fuse is not blown, then this relay glows the dash
Illumination lights (park dim) are yours glowing now.
yes the all that is good fuse to dash.
now out side car, lots of tail/park lamps, which dont glow, just rear?





541163b9-cbaa-4bea-a80d-dd14c2653f70.jpg

Feb 02, 2015 | Suzuki Cars & Trucks

1 Answer

Tail lights, instrument panel lights, and license plate lights not working. Fuse blows immediately when changed.


that line on that fuse is shorted, the fuse saved the fire.
we use an ampclamp DC ammeter to find the wire that is shorted
and the actual point of short.

the park-tail circuit (tail fuse, right) is the most complex of all.
20 lamps inside car, and many out side, it is the hardest to find of all shorts. but not with the tool
first check for damage behind all park lamps
i bet the fuse blows in park (1st click) not head lights. right?
side lamps the 4 front rear park lamps, some call it tail its not really tail now, was in 1920 ,not now. park is everywhere.
but the fuses can be marked tails, for fun .
imagine, calling the 2 front lamps tails. and are on .(my on going joke)
sidelamps,
the inside lamps are many too.
all dimmable lamps. so turn the dimmer down to zero and see if fuse blows now, NO?, bingo.

the best way to fix this is , visual inspections for collision damage or wire hacks in the cab.
then the fuse is pulled and circuit breaker inserted 15amp
(they sell em)
then we connent the ammeter to the wire (output of fues)
i push the switch and amps goes to infinity and the CB trips
if follow the cables, and find what line is shorted.

i missed one problem
on the rear or front 4 corners of the car may be twist lock blubs.
like 1157 or? these love to short. push in lamps never short.well not the lamp actual.
in not sure what lamps the 06 uses, but replace the brass based lamps. (in park tail ckt)


Jan 02, 2014 | 2006 Toyota Matrix XR

1 Answer

I would like a diagram of the 740 gle 1990 tail light wiring, I cannot seem to get them working correctly


You don't really need a diagram, it's simple. If you open both tail light boxes in the trunk you will see at the connector on the bottom a yellow wire in the first position. That goes to the brake bulb. If both tail lights do not work, make sure you are getting power to the driver side light first, if it is not getting power, the passenger side will not work either, they are in line with each other. If it is only the passenger side not working, the bridging wire could be bad.. try jumping it. Also, make sure you are getting power inside the tail light bulb holder. The metal connections can come loose. If there is no power to the driver side tail light it could be the bulb failure relay, that is the round red relay in the rear left side of the fuse box behind the ash tray/ cigarette lighter below the radio in front of the shifter. You should be getting power to the third brake light in the rear window...that is a different circuit and will not be affected. Try changing out the bulb failure relay, it supplies the power to the tail lights.

Jun 22, 2011 | 1990 Volvo 740

1 Answer

How do you replace rear tail lights on 1998 EL For Falcon Futura wagon


Below is a generic guide to replacing the tail lights on a vehicle. Refer to your user's manual for specifics on location. http://www.automd.com/518/how-to-replace-a-tail-light/

Mar 21, 2011 | 2005 Ford Futura

1 Answer

How do I replace the entire tail light on a 1987 honda civic dx?


if the panel is not damaged or only slightly damaged it should just be a case of removing the damaged tail light and fitting the new one, if all electrics work I would leave the socket

Jun 12, 2010 | 1987 Honda Civic

1 Answer

2006 Chevy Trailblazer Tail Lights


There was a recall on this, take to the dealer and they will replace the whole socket on this.

Nov 06, 2008 | 2006 Chevrolet Trailblazer

Not finding what you are looking for?
2002 Chrysler PT Cruiser Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

78267 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

chargerhp
chargerhp

Level 3 Expert

814 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...