Question about 2004 Isuzu Ascender

Open Question

Isuzu ascender low beam headlights wont work changed bulbs and checked all fuses still will not work. All the other lights still work just not the head lights.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: lowbeam headlight not working

I went to the dealer, the parts for this are back ordered... must be a common problem.

The terminal clips weaken over time, then fail. They need to be replaced, if you go the the Volvo dealer and ask they may help you out. Failing that, you could contact Volvo directly and ask them. They may make good for you. If nobody will help you, maybe the NHSTA should know about this saftey defect...

Posted on Nov 20, 2008

Ad
maklean
  • 1665 Answers

SOURCE: Headlights not working

Lihgting switch must also be checked
8673aab.gif

Posted on Jun 08, 2008

DickCanFixIt
  • 948 Answers

SOURCE: low headlights do not work

Check your hi/low beam switch. It sounds like you are not getting power through the switch on low beams.

Posted on Dec 29, 2008

Alcatrazx
  • 65 Answers

SOURCE: Low beam headlight is out on 2008 i290

Hi

Most probably you are seeing a lot of clutter in the bonnet to put your hand in and change it right? The best way sometimes is to unbolt the headlamp , move it out change the bulb and back in. But another way would typically be to remove the battery (and battery holder plastic box) or air box (whichever is in the way) and then you should be able to access the headlamp cover from behind. Anyways in both cases you should find a metal clip holding the bulb. Unclip the bulb whilst making sure that you dont touch the new bulb with you hands while putting it in. Press its metal clip in place again. and be sure to mount the plastic cover at the back properly so no water goes in the headlamp if its raining.

It was nice to help you :)

Best Regards

Posted on Jan 07, 2009

djicenova
  • 319 Answers

SOURCE: low beam headlights not working

check voltage at switch

Posted on Mar 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No power to right side (PS) headlight low beam plug socket, new bulb, fuse is good. High beam works, blinker works, park light works. just no low beam and doesn't register any voltage on volt meter.


check low beam fuse when switched on if it has voltage registering across the fuse ,if there is voltage across the low beam RHS fuse then it is possibly a pinched wire from the headlight running back towards inside of the car

Jan 30, 2014 | Cars & Trucks

2 Answers

Isuzu ascender 2004 ... headlights go off anytime they want ... sometimes for short periods of time and sometimes for days, all other lights work just fine including the high beams. what could be the...


Just solved this problem on our 2004 Isuzu Ascender. It was a bad relay located in the fuse/relay box which can be found inside the engine compartment. The relay is number 46 (HDM) on the diagram located on the inside cover of the fuse/relay box lid.

There are actually two of the same relays side by side in the fuse/relay box. To be sure this is the problem you can remove the relay from slot 45 and put in 46, the headlights should come on and stay on. Of course you will need to replace the relay which can be purchased and most GM/Chevy. The part number is: 15016745. I paid $52 for mine.

Oh, and be sure you use solid state relays only. The afore mentioned part number is a solid state relay.

Sep 22, 2011 | 2004 Isuzu Ascender

1 Answer

Low beam lights went out.... All fuses and bulbs are ok, what could be the issue


headlight relay.

Please see my tip at http://www.fixya.com/cars/r6053280-lights_out_lights_not_out_bulbs_ok . These are generic instructions. If you get stuck or need specific instructions for your car, please get back to me with model, year and engine info.

Oct 07, 2010 | 2005 Isuzu Ascender

2 Answers

Headlights out


You need to change the head light bulbs, they have two elements one for normal lighting and one for high beams, the low beam elements on those light bulbs are burnt, install new ones and you'll fine. Good Luck

Feb 08, 2010 | 1993 Isuzu Trooper

2 Answers

Hello, I have 2004 ascender my low beam lights are not working but my high beams are working. I have check both fuses. Please help me find a solutions.


test fuse 3y6 10amp if they are well test the relay headlamp that is in the driver modulates relay 46. If this is well the problem this in the body control modulates

Jan 01, 2010 | 2004 Isuzu Ascender

1 Answer

Low beam Headlights out. Not the fuses or the


Hi, check the low beam relay, relay's for the headlights should be either near the fusebox, or under the engine compartment, if not this may be hi/lo beam switch, hope this helps :)

Dec 26, 2009 | 2007 Isuzu Ascender 7 Passenger

4 Answers

My headlights on my 2000 monte carlo does not work


Day time running lights run low voltage to the high beam bulbs so it sounds to me like you need two new bulbs or you need to check the fuses and see if any need replaceing.

Dec 07, 2009 | 2005 Chevrolet Monte Carlo

2 Answers

2005 isuzu ascender my low beams headlights do not work at all my high beams do. i did not get a manual with this car what do I need to check. Thanks


First thing you need to check is the fuse, which should be under the hood. And then the bulbs. No... they didn't both burn out at the same time. They burnt out one at a time. You just don't notice iuntil the second one goes.

Oct 16, 2009 | 2005 Isuzu Ascender

1 Answer

Low beam not working


check the low beam relay in the engine compartment fuse panel near the battery

Apr 06, 2009 | 2004 Isuzu Ascender

1 Answer

Low headlights do not work


Check your hi/low beam switch. It sounds like you are not getting power through the switch on low beams.

Dec 29, 2008 | 2000 Isuzu Amigo

Not finding what you are looking for?
2004 Isuzu Ascender Logo

Related Topics:

537 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14380 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...