Question about Hyundai Accent

Open Question

HYUNDAI ACCENT 2004 HAS SPARK BUT NO INJECTOR PULSE .IM GUESSING ITS AN IMMOBILIZER FAULT ?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 158 Answers

SOURCE: 04 lancer no start,no spark or injector pulse.

it sound to me like the modual has fried it self in the distributor if it has you will have no spark or fuel pulse . have you checked the ignition fuses

Posted on Mar 24, 2009

Ad
chain saw
  • 94 Answers

SOURCE: 96 audi a6 quattro no spark or injector pulse

I WOULD GO FOR THE ECM AND CHECK WIRING

Posted on Mar 26, 2009

Molson02536
  • 3854 Answers

SOURCE: Replace oil pan on my Hyundai accent 2004

You can try to re torque the bolts before you drop the pan and re place the gaskit if that is where your leak is coming from. Good luck and hope you don't have to drop the oil pan. 

Posted on Apr 08, 2009

Molson02536
  • 3854 Answers

SOURCE: 1985 corvette no pulse to injectors

Very important that if you are not savvy of working on your Vette ...you would be better off - taking your car to a dealership for repairs on your trouble codes. However if you feel that you want to, First locate your car's alcl this component is located just below the instrument panel and to the left of the center console. Remove the plastic cover the first two slots to your right are the A & B slots.
The A slot is the diagnostic slot and the B slot is the ground slot. Insert the computer key into these slots if you do not have a computer key, a paper clip or wire jumper clip will do, (with the engine off) this is very important...now only put the ignition key to on ( not start !!!) the check engine light will display a code 12 which is one flash followed by two flashes. This code will be flashed three times ..followed by the trouble code stored in your car's computer.

What ever the code is it will be flashed three times. Have a paper and pencil ready and write down the code.

Code #12: Normal No Codes. 
Code #13: Open Oxygen Sensor Circuit. 
Code #14: Coolant Sensor Circuit Low.
Code #15: Coolant Sensor Circuit High. 
Code #21: Throttle Position Sensor High. 
Code #22: Throttle Position Sensor Low. 
Code #23: Manifold Air Temperature Circuit High.
Code #24: Vehicle Speed Sensor. 
Code #25: Manifold Air Temperature Circuit Low. 
Code #32: EGR System Failure. 
Code #33: Mass Air Flow Sensor High.
Code #34: Mass Air Flow Sensor Low. 
Code #36: Mas Air Flow Sensor Burn-Off Function Fault. 
Code #41: Cylinder Select Error. 
Code #42: Electronic Spark Timing.
Code #43: Electronic Spark Control. 
Code #44: Lean Exhaust indication. 
Code #45: Rich Exhaust Indication. 
Code #46: Vehicle Anti Theft Fault. 
Code #51: Faulty Mem-Cal. 
Code #52: Fuel Calpak Missing.
Code #52(1990-91 Corvette Only): Engine Oil Temperature Sensor Low. 
Code #53: System Over Voltage. 
Code #54: Fuel Pump Circuit Low Voltage. 
Code #55: Defective ECM. 
Code #62: Engine Oil Temperature Sensor Circuit High.

Please remember that if you have the computer key installed in the alcl and you start the engine (you will ruin the engine's computer) only put the ignition to on (not to start).

If you should get a check engine soon display.. you can use the above procedure and codes to buy the right part or at the very least to keep from getting taken for a ride and be made to pay hight prices for some inexpensive module that you could have installed yourself.

If your engine displays a trouble code ... your engine will go into limp mode ..it will still run but very poorly. You might be able to reset the computer if it will not start (just to get home) by disconnecting both battery cables and re-installing them ...this is not recommended ..but if you are stranded it might help unitl you get your car home or to a repair shop..good luck.

Good luck and hope this helps. 

Posted on May 08, 2009

  • 6 Answers

SOURCE: how to change spark plugs on hyundai 2004 2.4L

Remove the plastic cover that goes over the engine (the one with the Hyundai logo).
At this point, you will see the cables that goe to each fo the spark plugs.
Noting their position, remove them.
The spark plugs are ready to be removed, turn counterclockwise and replace with manufacturer recomended ones.

Posted on May 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can ignition module cause engine to have no injector pulse even though it has spark


injector pulse from ECU

the ECU will have fault codes stored internally to find the cause

would check other sensors first
crank angle sensor or cam angle sensor could stop the pulse
immobilizer

if the engine cranks over and has spark
ignition would be the last thing i would checkout

Nov 24, 2016 | Cars & Trucks

1 Answer

One day it starts then it dont replaced starter,crank sensor.fuel filter,ecurelay still same problem


How long since a tune-up?
Check for applicable trouble codes. Make sure battery has a full charge and battery connections all good.
With intermittent issues, you need to test when problem is ongoing. If it cranks good but won't start, have a helper crank it, while you check for spark at the spark plugs. If spark everywhere, use a gage and check proper fuel pressure. Also, check fuel injector pulse.

Apr 23, 2016 | 2004 Hyundai Accent

1 Answer

Hyundai accent has no injector pulse or spark


HI If all fuses are fine,EML warning light in cluster not on, The problem aria in these models were IGNITOIN COIL PACK ,CRANK SENSOR and make sure that ENGINE TIMMING BELT has not broken. BE advised that a diagnostic check will be required .

Jul 17, 2015 | 2003 Hyundai Accent

1 Answer

My 2001 hyundai accent fuel pump is working but the car does not start.what should i check n where is it located.pls give me guidance


CHECK FOR SPARK ,ALSO THE COMPUTER COULD HAVE GONE OUT NO INJECTOR PULSE.YOU MAY BE ABLE TO GET A TEST LIGHT ON THE INJECTOR WIRES TO SEE IF IT LIGHTS UP WHILE CRANKING.

Aug 05, 2011 | Hyundai Accent Cars & Trucks

1 Answer

96 hyundai accent with no spark and no power to


hi there i have a 96 hyundai excel,car has no dash lights or power to start the car,ive try my immobilizer but stil cant find the problem,does any one know how to bypass the immobilizer??ive disconnected all immobilizer wirers so far and re joint them to the original wires but stil no luck...any help would be appreciated

Feb 08, 2010 | 1996 Hyundai Accent

2 Answers

Crank no start: has no spark and only has injector pulse on cyl # 1. if you spray starting fluid directly into throttle body car starts and stays running and has spark and inj. pulse. once you turn the car...


Fuel pump, you have to have press in the rail to fire all injectors- she will run on ether but not good for her. Ck your pump and any related fuses,relays,wiring.

Jul 11, 2009 | 2002 Hyundai Accent

1 Answer

Connect injector node lite to injector no pulse while cranking, where do the injectors get their power?


The power to the injectors comes from the Engine Control Relay located in the the driver's side dash
Here's a photo:
e809bfa.jpg

May 10, 2009 | 2000 Hyundai Accent

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...